machining line used for sale

Used BORELLI T12 TECNA line - Year 2023Technical Specifications & Performance DataThe Borelli TECNA Line T12 is a glass bottle rinsing monoblock designed for sterile-water rinsing before filling in an automatic bottling process. This used bottling line component is fitted with a 12-pincer and 12-nozzle rinsing turret, providing a simple rinse treatment with discharged rinse water.Manufacturer: BorelliModel: TECNA Line T12Year of production: 2023Maximum speed: 3000 bphRinsing system: 12 pincers/nozzlesCompatible containers: Glass bottlesCompatible formats: 0.5L, 0.75L and 1.5L bottle formatsDimensions: 1600 mm width, 1420 mm length and 2200 mm maximum heightWeight: approximately 1800 kgThe machine is suitable for 0.75L Burgundy bottles with an 81.5 mm diameter and 299.5 mm height, as well as 0.75L Bordeaux bottles with a 74 mm diameter and heights from 308 mm to 344.5 mm.Advanced Automati ...

Maximum speed: approx. 2.00 m/s Installation dimensions: approx. 19,000 × 1,500 mm Quantity: 3 pieces Price per piece

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

including tooling for the production of pipes with diameters of 18, 19, 20, 25, 32, and 40 mm, as well as profiles in sizes 14x14 mm, 16x16 mm, and 20x20 mm. The applicable sheet thickness range is 0.6 mm to 1.5 mm. The forming machine—designated \"I1\"—was acquired from an Italian steel profile manufacturer in 2002 and subsequently adapted in-house for the production of the aforementioned steel pipes and profiles. The line comprises the following components: an uncoiler, a strip joining table, a strip accumulator, a forming unit, a sizing unit, a high-frequency generator, a flying saw, a discharge unit, a hydraulic pump, a control panel, and a set of forming rolls. The line utilizes a Lenze control system. Auction-ID: A1-50268-1

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control o ...

Cefla MITO 2P Finishing Line Complete industrial finishing line for automated surface coating and finishing operations. Manufacturer: Cefla Model: MITO 2P Year: 2017 Serial number: 317071 / 0 Total installed power: 15.6 kW Electrical supply: 400 V, 50 Hz, three-phase + neutral/PE Rated current: 17.8 A Largest load: 7.5 kW / 15.6 A Configuration: Enclosed finishing cabin, wide-belt conveyor, extraction/ventilation ducting, control cabinets and touchscreen/HMI-controlled processing stations Certification: CE marked Condition: Used Approximate dimensions: 12,000 × 5,500 × 4,000 mm Approximate weight: 6 t All descriptions are indicative only. Auction-ID: A1-50546-37

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-50714-4002

Manter BV sewing line for packaging bags with labeller, machine code: RSB-M, machine number: 211-132, year of construction: 06-2011, machine weight: 600 kg, rubber belt, belt width: 300 mm, mesh bags width: 600 mm, seal length: 700 mm, label width: 65 mm, total dimensions: 4500 mm x 1250 mm x 2300 mm.

Press capacity 320 ton, with belt sander Auction-ID: A7-50851-7

Equipped with: suitable for continuous coating/breading of meat, poultry and fish products, 400 mm working width, power: 0.9 kW. Auction-ID: A1-47448-53

Auction-ID: A7-50851-12

Beautiful Campervan equipped with E&P leveling system, air suspension. Camper is equipped with radio, swivel seats, pull-out bed above the front seats, refrigerator, freezer, 3-burner gas stove, sink, toilet, shower, 2x 1 person bed. Plenty of storage space at the back. Auction-ID: A1-47420-10

The line consists of the following devices: M-2500 fully automatic line for gluing mattresses using the HotMelt method, M210A - conveyor conveyor, M210 P - baling conveyor, M2100 - automatic mattress packing machine. Year of manufacture 2019

Consisting of 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH, total length approximately 4300mm. Auction-ID: A1-50393-26

Audi A5 S Line Quattro Coupe Mileage: 188,932 km Automatic transmission Engine not running Hobbyist vehicle / accident vehicle / spare parts dispenser Sold expressly as a non-roadworthy hobbyist vehicle or spare parts warehouse Vehicle is in severely damaged condition Heavy front damage Hood massively damaged and deformed Front bumper badly damaged / partially torn off Radiator area / front area badly damaged Right front area massively damaged Right headlight is missing/damaged Right front fender badly damaged Damage visible in the area of the right front wheel arch Windshield massively cracked Multiple airbags deployed Driver airbag triggered Passenger airbag deployed Side/head airbags deployed S Line equipment Quattro Black interior Sports seats MMI / multimedia system available Multifunction steering wheel Alloy wheels Loose vehicl ...

Consisting of 1x Krones bottle dispenser, 1x Kettner KAF 2000 box erector, 1x 13 meter roller conveyor, 1x Kettner Blitzpac bottle packing machine, 1x 10 meter roller conveyor, 1x Kettner HD-VIDEO box sealing machine and 1x 8 meter roller conveyor, including 2 platform stairs and 1x ceiling mounted chain hoist Auction-ID: A1-50393-25

Special version of the compact Kubota U10-3 mini excavator, built in 2019 and with a reading time of 411.7 hours. The machine has recently been serviced and is functioning properly, as is clearly demonstrated in the attached video. Features an auxiliary hydraulic line for hydraulic attachments, hydraulic sorting grapple, quick coupler, boom work light, rubber tracks, adjustable undercarriage, widening dozer blade and safety bar. The three different bins depicted in the photo are included in this lot. Thanks to its compact dimensions and adjustable working width, this mini excavator is particularly suitable for work in hard-to-reach places. The machine and attachments are in a well-kept used condition and show normal signs of wear. View the photos and video for a good impression of the condition, operation and complete execution. Auction-ID: A3-46134-22033

Berkel Pro Line GL30 cutting machine. This professional slicer has a 45-degree tilted blade that ensures a natural fall of the product, making it cut faster and more efficiently. In addition, the machine is equipped with a built-in and removable sharpener, which allows you to always keep the knife sharp with just one movement. In addition, the machine has a belt drive, which is quieter and requires less maintenance. Auction-ID: A1-40324-169

Press capacity 320 ton Auction-ID: A7-50851-9

Required tractor power: approximately 50 hp Number of rotors: 8, with 6 tine arms per rotor Trailed version with transport chassis Hydraulically foldable outer rotors and hydraulic lift Mechanical adjustment of the working angle Equipped with Lighting and road marking Auction-ID: A1-47393-55

The quantity indicated on the sheets is not necessarily guaranteed. Auction-ID: A1-50867-42

Sporty Audi A6 Avant 3.0 BiTDI quattro Tiptronic from 2014, equipped with the powerful 3.0-liter V6 twin-turbo diesel engine with 230 kW / 313 hp. In combination with permanent quattro all-wheel drive and the 8-speed Tiptronic, this A6 offers particularly strong performance without losing sight of the practicality of a spacious Avant. The car has extensive equipment including S line trim, Audi Drive Select, automatic climate control, heated front seats, navigation/MMI, reversing camera, front and rear parking sensors, electrically operated tailgate and electric glass sliding/tilting roof. Sporty look: The black body is combined with an RS-look honeycomb grille, black Audi logos, black multispoke alloy wheels with ABT finish and striking red brake calipers. Inside, the Avant offers five seats and a spacious, practical luggage compartment with luggage cover and integrated loading rails. T ...

Ford Fiesta ST-Line 1.0 EcoBoost petrol engine with 125 hp, registered on 19/06/2020 and with 165,297 km on the odometer. This Fiesta benefits from the ST-Line trim, recognizable by its sporty presentation, its specific upholstery with red stitching and its dedicated decorative elements. It is equipped with a 6-speed manual gearbox and comes in black. The cabin offers a sporty and functional presentation, with an integrated multimedia screen, GPS navigation, automatic climate control and heated front seats. The car also has front and rear parking sensors as well as 18-inch alloy wheels. Main equipment ST-Line finish 18-inch alloy wheels 205/40 R18 tires Built-in GPS navigation Central multimedia screen Automatic climate control Heated front seats Sport upholstery with red stitching Multifunction steering wheel Start button Front and rear parking sensors Front fog light ...

Capacity 630 tons, with DIMECO winders and unwinders Auction-ID: A7-50851-8

The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description:, Features:, - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line., - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types., - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards., - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput., - Versatile: Can handle various liquid types, from water to thicker, more viscous products d ...

Pressing line consisting of: CATTANEO PRM 320-500-3000 mechanical press from 1976, SARONNI 600 coil unwinder from 1958, driver Auction-ID: A7-50851-5

Key data: 1000 mm, 1 mm

used CoilTec cross-shear, with hold-down and unwinder, mobile, with connection pockets to the Modular workbench, spout height 965 mm Note: Sheet metal infeed only possible from the left! Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey/orange Dimensions::1320 x 1500 mm Coil weight: 250 kg

Used HUNDEGGER Speed Cut SC1 Fast cutting machine for various long components. Optimized cutting, drilling, milling, etc. Automatic feeding and execution. Various processing units including tools, as can be seen in photos. - Year of construction 2005 - Immediately available - more photos & video available - Dismantling and loading included - Tools as seen in photos, included. - Separate leftover piece conveyor belt not included.

Press capacity 320 tons, with unwinder and feeder Auction-ID: A7-50851-6

Missing battery Auction-ID: A1-40324-83

Consisting of 1x u-shaped feed conveyor belt (L = approximately 4 meters), 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH and 1x elevator belt (length approximately 4800mm. Auction-ID: A1-50393-12

These rims also fit directly on many models such as the Audi A3/S3/RS3, Volkswagen Golf, Seat Leon and Skoda Octavia. Make sure that the ET value does not deviate too much. Auction-ID: A1-47420-1004

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Labelling line with two print and apply stations, This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control., The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-nederland-labelling-line-with-two-p rinters/, Type: Labelling line with two print and apply stations, Stations: 2, each with printer and label reel, Controls: Display per station, push-button panel with emergency stop, Construction: Stainless steel frame with conveyor

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 750 kg per hour and is designed for an input of approximately 1,500 litres of cultered or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 11 kW, Churning cylinder II: 1,5 kW and Squeezer / Working section: 3,7 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danfoss  ...

Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: "Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: Blowing machine SIG Type Blomax 8 Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap feeding unit Chiller (one compressor not working) HEPA Filter Unit Steam, Air, and Water Filter Syste ...

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...