machining center used for sale

Key data: 1740 mm, 760 mm, 660 mm

Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark

Manufacturer: Hedelius Model: Forte 7 Condition: Used Stock number: 9457 Control system: Siemens Sinumerik Switch-on hours: 2682 h Operating hours: 640 h Work table length: 3080 mm Work table width: 700 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 18000 1/min X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Number of all tools: 45 pieces

turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i-s spindle passage: 65 mm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min x-axis: 175 mm z-axis: 650/975 mm y-axis: +/- 40 mm rapid traverse X/Y/Z: 20 / 40 / 20 m/min feed capacity X/Y/Z: 5,5 / 5,5 / 10 kN tool turret - number of stations: 10 number of driven tools: 10 mm toolpiece turning speed range: 1 - 6.000 U/min power capacity at 25 % load: 5,50 kW max. torque at 25% load: 17,50 Nm tool taper DIN 69880: Ø30x55 spindle diameter in front bearing: 110 mm total power requirement: 95,00 kW weight of the machine ca.: 16,00 t dimensions of the machine ca.: 10,00 x 3,50 x H3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

This 3-axis SCM Morbidelli N100 22-31 PROSPACE was manufactured in 2022. It features a powerful 9.5 kW electrospindle, a full nesting table, and a 13-position linear automatic tool changer. The machine is equipped with two vacuum pumps and an automatic tool length measurement system, making it suitable for various applications such as nesting, drilling, and milling. If you are looking to get high-quality CNC processing capabilities, consider the SCM Morbidelli N100 22-31 PROSPACE machine we have for sale. Contact us for further details.

x-travel: 1660 mm y-travel: 510 mm z-travel: 510 mm Control: M+ Mazatrol Table dimensions: 2000x510 mm table load: max. 1.000 kg number of spindle speeds: 7.000 UpM tool taper: SK 40 tool piece magazine with: 48 Stück weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 mm, 400 mm, 330 mm

Technical data: Manufacturer: Stama Type: MC 021 Fanuc Robodrill Year of Make: 2006 Control: Fanuc Series 31i Model A5 Travel: X 700 mm Y 400 mm Z 330 mm Rapid traverse X/Y/Z: 54 m/min. Working spindle Speed: 10,000 rpm Tool/movement Tool holder: DIN 30 Tool changer: 21-speed Dimensions and weight Weight: 2,200 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Chip conveyor closed roof

Mori Seiki NL2500Y/700 CNC Drehmaschine (02/2008) Hersteller: Mori Seiki Typ: NL2500Y/700 Baujahr: 02/2008 Zustand: gebraucht, sehr gut, in Produktion Drehdurchmesser 275 mm Drehlänge 705 mm Steuerung MAPPS II MSX 850 Umlaufdurchmesser über Bett 923,8 mm Umlaufdurchmesser über Planschlitten 755 mm max. Drehdurchmesser 356 mm max. Stangendurchmesser 80 mm Hauptspindel Drehzahlbereich ? Hauptspindel 4.000 U/min Antriebsleistung ? Hauptspindel 26 / 22 kW Spindelnase JIS A2-8 Spindelbohrung 91 mm Spindellagerdurchmesser 140 mm C-Achse 0,001 ° Verfahrweg x-Achse 260 mm z-Achse 795 mm y-Achse 100 (+/- 50) mm Revolver Werkzeugplätze 12 Pos. Schafthöhe für Vierkantwerkzeug 25 mm Schaftdurchmesser für Bohrstange max. 50 mm Revolverschaltzeit 0,25 sec. Drehzahlbereich der angetr. Werkzeuge 6.000 min -1 Antriebsleistung ? angetr. Werkzeuge 5,5 / 3,7 kW Vorschub ...

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm rotary table tiltable: 360 Grad Number of working hours: 55.000 h tool taper: HSK 63 spindle turning speed range: 20.000 U/min max. torque on the spindle: 85 table-size: 400 x 500 mm table load: 0,5 t 4-axis machine Chain-type tool magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control OSP 100U Travel X/Y/Z: 560 x 610 x 560 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 60 Wkz., SK 40 Chip conveyor d

- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system - Chip conveyors - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG DMU 40 eVo ist ein vertikales Bearbeitungszentrum mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Tisch 480x400 mm, 5 T-Nuten (63 mm Abstand, 14H7), Zentrierbohrung 30H6, max. Tischlast 250 kg; Wege X400 Y400 Z375 mm, B -5/+110°, C 360°, Tischdrehzahl 60 t/min. Technische Hauptdaten: Leistung 50 kW, Spindel HSK-A63 bis 24000 min-¹ (stufenlos), Drehmoment 130/86 Nm, Spindelleistung 35/25 kW, Vorschub 0-80000 mm/min, Druckluft 6 bar, 3x400V 50Hz, Abmessungen L2960xB2620xH2530 mm, Gewicht ~7150 kg. Zubehör: FANUC Lade-Roboter, Kühlmittel/IKZ 40/80 bar, TRS2 Werkzeugbruchkontrolle, Laser-Werkzeugvermessung, Späneförderer, Nebelabsaugung, Spülpistole, rotierendes Sichtfenster, Schaltschrank-Klimagerät. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Werkzeugbau. Technische Daten ohne Gewähr

turning diameter: . mm turning length: 2000 mm control: Siemens 840 D sl mainspindle: turning speed max.: 3800 1/min mainspindle: torque max.: 1200 Nm tailstock:: diameter of quill: 140 mm center point: MK6 quill power: 5 - 30 kN feed rate Z-axis: 0,1 - 30000 mm/min rapid traverse Z-axis: 40 m/min feed rate X-axis: 0,1 - 18000 mm/min rapid traverse X-axis: 25 m/min total power requirement: 125 kW weight of the machine ca.: 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1400 mm y-travel: 700 mm z-travel: 700 mm Control: table-size: 1500 x 700 mm spindle taper:: BT 50 spindle turning speed range: 6000 U/min spindle motor: 18,5 / 15 kW rapid traverse: 24 m/min distance table - lower edge spindle: mm workpiece weight: 1500 kg total power requirement: kVA Total weight, approx.: t dimensions of the machine ca.: 6,3 x 3,3 x 4,3 m Vertical BAZ , equipped with: - CNC control FANUC 0i-MF PLUS - ATC 24-fold (BT 50) - Air thru spindle - Spindle oil cooler - Oil skimmer - AICC 2 - DATA SERVER - Large tool management - Heat exchanger - Coolant thru spindle 20bar - Chip conveyor + bucket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer GEMINI Model GHT 6 G2 1,300 x 3,000 Year 2007 CNC FAGOR 8055 TC/C Capabilities Max. turning on bed 1,300 mm. Maximum turntable diameter 1,300 mm. Ø Max. Turning on Transverse Carriage 940 mm. Distance between points 3,000 mm. Axles Fast Forward X-Axis, Z 8 m/min C-axis and motorized tools INCLUDED Head Speed 0-800 rpm No. of automatic ranges 4 Main engine power 46 kW Nose Type DIN-55026-B11 Head shank pitch 104 mm. Turret Turret Positions 8 Turret type VDI 50 (Ø 470 mm) Power of motorized tools 5.5 kW Counterpoint Tailstock shank diameter 180 mm Tailstock shaft course 300 mm Additional equipment Universal 3-jaw plate Ø 900 mm. INCLUDED 3-point bezel Ø 750 mm INCLUDED 3 Point Bezel Ø 400 mm INCLUDED 2 Pcs. Axial motorized tool holder INCLUDED 1 Pc. radial motorized tool holder INCLUDED 20 VDI 50 TOOL HOLDERS INCLUDED Air conditi ...

Key data: 1050 mm, 530 mm, 510 mm

Mazak VCN 530C CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, left - Cooling by the spindle 15 bar - Kitagawa NC Rotary Table MR 200 - Total spindle runtime 3,454 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

General Manufacturer: Doosan Type: Lynx 2100LMSA Year of manufacture: 2018 Control: Fanuc iSeries Travel: X 205 mm Z 560 mm Rapid traverse X/Z: 30/36 m/min Capacity Turning diameter: max. 300 mm Turning length: max 510 mm Main spindle Spindle speed: 6,000 rpm Spindle power: 15 kW Spindle Torque: 127 Nm Revolver Number of tools: 12 Dimensions and weight Dimensions: L 2,805 mm x H 1,693 mm x W 1,595 mm Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Boss 552 32 L Bar Feeder, Year 2018 Sub-spindle AGW Tool holder BMT45 Parts catcher

General Manufacturer: Doosan Type: Puma 2100MS Year of Make: 2011 Control: Fanuc iSeries Travel: X 260 mm Z 590 mm Rapid traverse X/Z: 30 m/min Capacity Turning diameter: max. 406 mm Turning length: max. 520 mm Main spindle Spindle speed: 4,500 rpm Spindle power: 7.5 kW Revolver Number of tools: 12 Dimensions and weight Dimensions: L 3,415 mm x H 1,900 mm x W 1,863 mm Weight: approx. 5,560 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Master 80 HF 33 L Bar Feeder, Year 2011 Sub-spindle AGW Tool holder BMT45 Parts catcher

CNC Turning Center MAZAK QT-COMPACT 200M L.

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

X-axis travel: 1,050 mm Y-axis travel: 550 mm Travel Z-axis: 520 mm Spindle speed (max.): 12,000 rpm Overall height: 2,778 mm Overall width: 2,977 mm Overall length: 3,635 mm Total weight: 6,700 kg Workpiece weight (max.): 800 kg - Control: SIEMENS 828 D incl. OPERATE and ShopMill - Number of magazine slots: 30 - Tool holder: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum probe ZX-Speed IR - Blum 3-D touch probe TC-52 LF

MAKTEK VM 400 CNC vertical machining center was built in 2015 in Poland by MAKTEK Jerzy Zalewski (currently CORMAK). The machine is suitable for both unit and series production, particularly for manufacturing components requiring high precision and repeatability. It enables precise milling, threading and drilling of workpieces using a reliable spindle. The spindle, driven by a high-power motor, reaches a maximum speed of 4000 rpm. It cooperates with an automatic, 10-position tool magazine, streamlining the subsequent machining operations. The rigid design of the MAKTEK VM 400 CNC milling machine ensures stable operation even during intensive use. The machine is equipped with a SIEMENS SINUMERIK 808D MILLING CNC controller with an intuitive interface. The VM400 CNC machining center weighs 1850 kg. Technical specifications of the MAKTEK VM 400 milling center - CNC controller: SIEMENS S ...

CNC controller: FS-31IA5 (MAPPS 3) Capacity Z-axis travel mm: 1.550 + 100 Turning length mm: 1.542 Max. turning diameter mm: ø: 660 Swing over bed mm: ø: 730 Bar work capacity mm: 80 / 80 Turning diameter f. lower turret mm: 350 Distance between spindle centers mm: 1.862 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 B-axis degree: ±120° (Index 1°) C-axis degree: 360º (0,001º) Speed spindle rpm: 12.000 Drive power kW: 18,5 / 11 (30min/cont) Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool length max. mm: 400 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Milling function: PROVIDED Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22 / 18,5 (30min/cont) Spindle bore mm: 91 Counter spindle  ...

turning diameter: 510 mm turning length: 1000 mm control: MAZATROL T PLUS total power requirement: 22-26 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.630 mm travel -y axis: 762 mm travel -z axis: 650 mm control: FANUC 0I-MD Spindle speed: 12.000 min -1 weight of the machine ca.: 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

The machine is in good technical condition; testing is possible by prior arrangement. It is designed for machining parts made of wood, plastic, and composite materials. It features the Siemens SINUMERIK 840D/810D control system.

Manufacturer: YCM Model: XV 560 A Year: 2011 Condition: Used Stock number: 9493 Control system: FANUC MXP-100FA Switch-on hours: 11362 h Operating hours: 3460 h Work table length: 700 mm Work table width: 420 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 410 mm Travel Z axis: 450 mm

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Manufacturer: MORI SEIKI Model No.: SH 633 Year: 1999 Condition: Used Stock number: 9496 Control system: MORI SEIKI MSG-502 Work table length: 700 mm Work table width: 500 mm Maximum table load (uniform): 1200 kg Maximum spindle speed: 10000 1/min X-axis travel: 840 mm Y-axis travel: 760 mm Travel distances Z-axis: 840 mm Machine weight: 18500 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

x-travel: 1020 mm y-travel: 610 mm z-travel: 610 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Hermle U630T BJ 1998

Key data: 4000 mm, 1200 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-7000 rpm • A-axis: - 181° to + 10° • 60-fold tool changer • SK50 interface • NC rotary table: Ø 1500 mm • Table size: 4150 mm x 1500 mm • Internal coolant supply (IKZ) • Chip conveyor • Signal light Machine has approx. 28,000 program running hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1760 mm, 600 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Technical data: • Spindle: 10000 rpm • Swivel head: -90° to +90° • 22-fold tool changer • Table size: 2380 mm x 600 mm • Internal coolant supply (IKZ) • Chip conveyor • Coolant system Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 395 mm, 450 mm

6-axis CNC turning center Control: SIEMENS Sinumerik 828D incl. OPERATE + PPU290 Flat guides in all axes Main and sub-spindle Max. speed: 6,000 1/min 12-station turret (all driven) Speed of tools: 5,000 1/min Y-axis B-axis Travel: X= 235, Z= 580, Y= +- 52.5, W= 580 mm Bar Passage: 67 mm incl. tool package Chip conveyor

Stock No.: 4041 MACHINING CENTER Manufacturer: FANUC, Type: ROBODRILL D21 Serial No.: P156YG066, Year of manufacture: 2015 Specifications: Longitudinal movement (X) 500 mm Transverse movement (Y) 500 mm Vertical movement (Z) 330 mm Spindle Taper 30 ISO Stepless spindle speeds 10000 rpm Tool Changer 21 Rapid traverse 54 Control FANUC 31i - B5 Controlled in axles 4 Operating hours spindle 12401 hours Accessories:                             Cooling by spindle                 CNC rotary table.                        Tool holders                   Tools Robot FANUC M-710 ic Dimensions: Weight: 2100 kg

Used machine HAAS ST-30Y Year of manufacture 05/2019 Dates to follow. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. th ...

Machine Type: CNC Turning Center Model: CTXbeta500V4 Manufacturer: DMGMORI Control: Siemens 840D si Operate solutionsline Year of Make: 2014 Location: EU (#301336) Facilities • Main spindle 34/25 kw rpm 5000 • Hydraulic 3-jaw chuck 250 mm • Manual tool measuring device • 12 VDI 40 station turrets • Tool drive for all stations • C-axis • Y-axis • Scale X • Chip conveyor • 12 bar / coolant system • Coolant spray gun incl. documentation if available Technical data Turning diameter max. approx. 410 mm Turning diameter standard approx. 270 mm Rod diameter max. approx. 65 mm X-axis approx. 300 mm Z-axis approx. 550 mm Y-axis approx. +/- 60 mm Spindle speed 1 approx. 5000 rpm Speed milling pindle approx. 4,000 rpm Rapid traverse X/Y/Z approx. 30/22.5/30 m/min Power spindle 1 approx. 34/25 kW Footprint L x W x H approx. 5.3 x 3.0 x 2.1 m  ...

3 digital axes Axis: X Longitudinal: 510 mm - Transverse Y: 510 mm - Vertical Z: 510 mm Worktop surface dimension: 650 x 510 mm Load capacity: 350 kg Spindle Speed Range: Acramatic 850 SX - 60 -8000 tmm Storage capacity: 21 tools Automatic tool change time 7.5s Maximum weight of tool and tool holder: 6.8 kg Fast travel speed Xet Y axes: 20000 mm/min Z-axis fast travel speed: 18000 mm/min

Machine Type: CNC Turning Center Model: CTXbeta1250 TC Manufacturer: DMGMORI Control: DMG MORI CELOS with Siemens 840D sl Operate Year of Make: 2020 Location: Germany (#301432) Facilities - Turning-milling spindle HSK-A 63 - Tool magazine 80 places - Hinge belt chip conveyor - Main spindle ISM 102 33/40kW - Sub-spindle ISM 76 25/32kW - Counter-pressure stress main spindle and sub-spindle - Milling spindle 20,000rpm - High pressure cooling 80bar - Feed rinsing device, main spindle - Tool probe, BLUM for fixed tools in the turning/milling spindle - Tool probes for workpieces - Automatic door - Oil mist extraction mechanical - Bar machining package 104 mm - Workpiece pick-up device with conveyor belt - Hydraulic hollow clamping device n max 3,600 rpm - Indicator light, 4-colour - Machine Protection (MPC) - Electrical interface standard Profibus for Robo2Go -  ...

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.