machining center used for sale

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: total power requirement: --- kW weight of the machine ca.: 6,8 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- Available as an OPTION at an additonal cost: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparati ...

The machine is in good technical condition; testing is possible by prior arrangement. Fully equipped, with tooling and accessories valued at approx. 1 million. X-axis travel: 1050 mm; Y-axis travel: 900 mm; Z-axis travel: 600 mm. Control system: Heidenhain TNC 640. Max. spindle speed: 18,000 rpm. Table clamping surface: 900 x 750 mm. Tool positions: 42. Tool holder: HSK 63A. Max. tool diameter: 80 (125) mm. Max. tool length: 225 mm. Max. tool weight: 8 kg. T-slots – width: 18 mm; spacing: 100 mm. Center bore: 32 mm. Rotation range: 360°. Tilt range: +/- 115°. Max. table load: 1500 kg. Rapid traverse (X/Y/Z): 35/35/35 m/min. Operating hours: approx. 8,500 h. Spindle hours: approx. 2,500 h. Machine weight: approx. 15 t.

Capacity: 3-axis Stroke: Longitudinal X:300 mm - Vertical Y: 350 mm- Transverse Z: 250 mm Spindle motor: Max speed: 6000rpm Continuous power :3.7 kW Peak power :5.5 kw Table: Dimensions: 300 x 300 mm Mounting: M8 centerline: 50 m Fast travel speed: 10 m/min Fast Rotation Speed B: 10RPM Tool Holder Type: BT40 Number of pitches :20

EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining Center Technical Data: Gantry clearance height: 1,380 mm Table size: 5,000 × 2,300 mm A-axis: ±110° C-axis: ±360° Spindle power: 27 kW Spindle torque S1: 130 Nm Spindle torque S6: 170 Nm IKZ: up to 40 bar Workpiece measuring system: M&H with wireless probe Coolant system: with band filter Direct measuring systems: in all linear axes Automatic central lubrication Spindle cooling Ethernet interface Safety features: safety bumper, light grid, and lamella curtains

LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H

Key data: 800 mm, 800 mm, 800 mm

DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Interchangeable Table – Used For sale is a used DMG MORI DMC 80H duoBLOCK horizontal machining center. The machine is currently still in productive use and is reliably used in series production. It is mainly used for processing steel and cast iron. Condition: Fully functional and operational. Viewing under power possible by arrangement. Equipment: 4-axis machining Horizontal design for efficient chip removal Changing table (pallet changer) for reduced non-productive times duoBLOCK design for high stability and precision Tool Changer Generous working space for complex components Further details on the equipment are available on request Control manufacturer: Siemens Control model: Sinumerik 840D Workpiece weight (max.): 1,200 kg Total height: 3,100 mm Overall length: 4,850 mm Overall  ...

Manufacturer DMG-MORI Model DMF 260 Year 2011 CNC SIEMENS SINUMERIC 840D Table Table surface 2,900 x 700 mm. Maximum weight on table 2,150 kg. Routes and advances Longitudinal (X-axis) 2,600 mm Transverse (Y-axis) 700 mm Vertical (Z-axis) 700 mm Fast forward of the axes (X,Y,Z) 40 m/min Working progress of the axes (X,Y,Z) 40 m/min Axle acceleration 4 m/s2 Head Revolutions 14,000 mm/min SK 40 Head Cone DIN 69872 Main engine power 18.4 / 14 kW Automatic tool loader No. of Charger Tools 30 Maximum tool length 300 mm Maximum tool weight 6 kg. Maximum tool diameter with adjacent free positions 130 mm Maximum tool diameter without adjacent free positions 80 mm Equipment Refrigeration 40 Bar / 600 l. INCLUDED Longitudinal chip evacuator INCLUDED Coolant cleaning gun INCLUDED Portable steering wheel INCLUDED Direct Measurement System INCLUDED Machine hours  ...

SW BA one6Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpmMovement X/Y/Z : 600/650/500 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2020Control system:Siemens 840 DslTravel range X/Y/Z:600/630/500Rapid traverse X/Y/Z:120 m/minSpindle:Technologie:MotorspindelnDrehzahl:17.500 U/minLeistung:35 NmDrehmoment:80 NmWerkzeugaufnahme:HSK-63Swivel mount:Technology:A-axis or U-axis with counter bearingDrive:Direct drive (torque motors)Clamping bridge:Technology:Clamping bridge with 1x NC rotary table eachDrive:Direct drive (torque motors)Table diameter:Ø 340 mmMax. table load:150 kgMax. fixture dimensions:Ø 675 x 450 mmTool magazin:Technology:Chain magazineTool changer:Pick-upNumber of stations:105Max. tool diameter:80 (160) mmMax. tool length:450 mmEquipment:Position measurement systems:Direct on all axes (glass scales)Drive systems:Direct  ...

Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements Chip conveyor Coolant / belt filter system Interlit SPB 3/600 Auction-ID: A7-50158-13

Horizontal machining center with SIEMENS SINUMERIK 840D control; NC rotary table; Chip conveyor; Coolant system; Coolant through the spindle; Magazine with 2 cassettes of 50 slots each. Auction-ID: A7-50158-15

Key data: 700 mm, 400 mm, 330 mm

A FANUC Robodrill α-D21LiA5 High Power vertical machining centre from 2014 is for sale. No repair machine – no known defects – ready for immediate use. The machine features the powerful FANUC Series 31i-B5 controller, a 21-fold tool changer, MAS BT30 tool holder and extensive equipment with a Renishaw touch probe and tool measurement. This machine also has a 100 mm stand raiser. The machine is ideal for the fast and precise machining of individual parts and series and is very productive, especially due to the high travel and feed speeds. Technical data Manufacturer: FANUC Model: Robodrill α-D21LiA5 Version: High Power Version Year of Make: 2014 Control: FANUC Series 31i-B5 Weight: approx. 2,200 kg Connected load: approx. 11 kVA Travels: X-axis: 700 mm Y-axis: 400 mm Z-axis: 330 mm Machine table: Table size: approx. 850 × 410 mm 3 T-slots ...

Chip Conveyor Scraper Belt Coolant system 3 pumps / cartridge filter High Pressure Pump Grundfoss Type CRK2-220/22 A-W-A-AUUV Auction-ID: A7-50158-5

Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA Pallet System MTS500, Tool Breakage Detection, Coolant System, Coolant through the spindle (23 l/min at 40bar), chip conveyor, electronic handwheel Auction-ID: A7-50158-12

Horizontal machining center with control SIEMENS SIN840D (PCU50); Chip conveyor, gravity belt filter system, IKZ 40bar at 23 l/min; Auction-ID: A7-50158-8

This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: total power requirement: --- kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA:  ...

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-24

DMG MORI DMC 850 VYear of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpmMovement X/Y/Z : 850/520/475 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2018Control system:Siemens 840 Dsl – OperateTravel ranges X/Y/Z:850/520/475 mmSpeed:20,000 rpmTool holder:HSK 63Spindle:Technology:Motorised spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:130 NmTool holder:HSK 63Fluid supply:Coolant + blast airWorking table:Clamping area:1,160 x 570 mmMax. table load:1,000 kgTool magazin:Technology:Chain magazineNumber of stations:60Tool changer:Double gripperMax. tool diameter:80 (130) mmMax. tool length:300 mmEquipment:Positioning sensors:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system, 20 barWorkpiece measurement:Renishaw Touch probeTool measurement:Tool setterEmulsion mist separator:MechanicalTool coding:Balluf sen ...

CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain TNC 640 Year of Make: 2015 Internal machine number: 76 Travels: X-axis 600 mm Y-axis 400 mm Z-Axis 400 mm Z-Axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm

X-axis 1250/420 mm Y-axis 510/315 mm Z-axis 480 mm B-axis 220° C-axis 360° Drive power 19 kW Max. spindle speed 12000 rpm Tool holder SK40 33 tool positions

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm

Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm

WFL M 35 G MILLTURN ist ein CNC Dreh-Fräs-Bohrcenter hoher Präzision, Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 2000 mm, Dreh-Ø max 520 mm, Spindelbohrung 77 mm; Verfahrwege Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Technische Daten: Hauptspindeln bis 4000 min-1, 29/33 kW (551/630 Nm), angetriebene Werkzeuge 6/13 kW, Frässpindel 9000 min-1 15/20 kW (165 Nm); Eilgänge Z 40 m/min X 30/10 m/min; Gewicht ~20000 kg; Abmessungen 7900×5700×3250 mm. Ausstattung: Lampe, Kühleinrichtung, Papierfilter, Ölnebelabsaugung, Späneförderer, automatische Be-/Entladung, Messsystem Renishaw. Für enge Toleranzen, Anwendungen in Automotive, Luftfahrt, Medizintechnik, Uhrenfertigung und Maschinenbau. Technische Daten ohne Gewähr

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...

FEATURES: • Longitudinal travel 1020 mm • Cross travel Y 510 mm • Vertical travel Z 575 mm • SIEMENS CNC Type • Table length 1200 mm • Table width 500 mm • Max. Authorized weight 800 kg • Number of tools 30 • ISO 40 spindle taper • Max spindle speed 8000 rpm • Spindle motor power 15 kW • Length x width x height 3275 × 2948 × 2996 • Weight 7500 kg

Key data: 760 mm, 640 mm, 760 mm

X-axis travel:760 mm Y-axis travel:640 mm Travel Z-axis:760 mm Control manufacturer:FANUC Control Model:Series 18i-MB Workpiece height (max.):800 mm Workpiece weight (max.):500 kg Spindle speed (max.):6,000 rpm Number of slots in tool magazine:120 horizontal machining center with patette changer, two pallets 500x500, 120 tool holders, touch probe Tool length:400 mm Tool weight:15 g Equipment:Chip conveyor, documentation/manual

The machine is currently inoperable due to a control board failure; it is sold without the workpiece probe, clamping fixtures, and tools.

Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-5 ...

This 4-axis Mazak FH4800 was manufactured in 2004. It features a maximum spindle speed of 12,000 rpm and impressive travels of 560 mm in the X-axis, 610 mm in the Y-axis, and 560 mm in the Z-axis. The machine is equipped with a 40-position automatic tool changer and includes a Fastems 8-station pallet loading system. If you are looking to get high-quality machining capabilities, consider the Mazak FH4800 horizontal machining centre we have for sale. Two units are available: one with the Fastems 8-station pallet loading system and one in standard configuration without the pallet system. A special package price is available for the purchase of both units. Please contact us for further details.

HNK HPM Double Column 5-Face Machining Center Year: 2011 CNC: Fanuc 31i-MA Status: Under power Main specifications: X travel: 10,250 mm Y travel: 6,400 mm Z travel: 800 mm W travel: 2,000 mm Table: 4,000 × 10,300 mm Work area: 4,000 × 10,000 mm Maximum load: 50,000 kg Between columns: 5,300 mm Height clearance: 2,600 mm Spindle: 5–6,000 rpm Spindle power: 22/25 kW Maximum torque: 600 Nm Ram: 380 × 380 mm Tool shank: BT50 ATC: 60 tools Scales on X/Y/Z/W CTS Rigid tapping Right-angle head Extension head 2 chip conveyors + chip bucket This is a very large-capacity HNK machine designed for heavy and oversized workpieces, with 5-face machining capability and a maximum table load of 50 tons. The machine is currently under power and available for inspection.

SCHAUBLIN 202 TG-CNC W25-0127 ist ein CNC-Dreh-, Fräs- und Schleifzentrum mit hoher Präzision, großer Genauigkeit und zuverlässiger Bauweise. Arbeitsvermögen: Spitzenhöhe 60 mm, Vorschubweg Z 300 mm, X 150 mm, Spannbohrung 19 mm; Lineares Auflösungsvermögen 0,0001 mm, C-Achse 0,0001°. Technische Daten: Spindeldrehzahl bis 7000 t/min, Spindelleistung 5/6 kW, Drehmoment 26,1/35,1 Nm, Eilgang 20 m/min (X/Z), Anschluss 3x 400 V 50 Hz; Gewicht ca. 3000 kg; Abmessungen L1930×B1300×H2040 mm. Ausstattung: Spannzangenaufnahme Typ W25, integrierte C-Achse. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours! The pallets are clamped on the rotary tilting table. Incl technical documentation and HSK-E 40 tool holders and three pallets. additional technical data: • rapid traverse: max. 30 m/min

With technical documentation as well as workbench and accessories such as HSK-E 40 tool holders, equipped with tools. Additional technical specifications: • Table T-slots quantity: 5 pcs • T-slots dimensions: 18H12 • Distance HSK holder - table: 550 mm • Feed drive X-, Y- and Z-axis: Traversing speed: 30 m/min • Dimensions of the workbench: approx. 1500 x 900 x 1100 mm

Chest of drawers 9 drawers filled with tool drills/taps/reamers/cutting frames/ Auction-ID: A1-50076-281

Machine is dismantled and stored (see photos). May show traces of storage Auction-ID: A1-50370-4

CNC horizontal machining center with horizontal Kessler motor spindle, automatic tool changer and pallet changing system for automated series and multi-sided machining. Manufacturer: Hüller Hille GmbH / MAG Industrial Automation Systems Type: BLUESTAR 5+ / nbh 5+ Year of Make: 2006 Machine No.: A.1002269.02 Spindle: Kessler LC200, horizontal Spindle speed: infinitely variable up to 10,000 rpm Tool holder: HSK 63 Tool magazine: 134 + 4 slots Max. tool Ø: 150 mm Max. tool length: 350 mm B-axis/rotary table: 360°, pitch 1° Rapid traverse X/Y/Z: up to 50,000 mm/min Feed force X/Y/Z: 5,000 N each X/Y/Z drives: Siemens, 3.77 kW / 3,000 rpm each Turntable drive: Siemens, 1.48 kW / 3,000 rpm Tool magazine drives: Siemens, 1.29 kW / 6,000 rpm each Hydraulics: ATB, 3 kW / 1,710 rpm Spindle cooling: Hydac, 0.37 kW / 1,380 rpm Chip auger: FAS, 0.37 kW / 1,380 rpm Pallet syst ...

axis stroke (X,Y,Z): mm Number of spindle head vertical: St. Number of spindles head horizontal: St. Masterwood Project 455 CNC machining centre with tools ------------------------------------------------ Technical specifications to follow ------------------------------------------------ Price of the above machine on enquiry! ------------------------------------------------ (Technical specifications as per the manufacturer – subject to change!) All prices quoted are net, plus statutory VAT. Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm : 450 mm : 500 mm : 900x450 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer HERMLE Model C40 U Dynamic Year 2006 CNC control HEIDENHAIN iTNC 530 Table Table surface Ø 800 mm. Tilting rotary table INCLUDED Maximum weight on table 1400 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) +25 / -110 º Direct Measurement System INCLUDED Maximum part diameter 840 mm. Routes and advances Strokes (X/Y/Z) 850/700/500 mm X, Y, Z axis fast feed 60,000 mm/min Head Head speed 18,000 r.p.m. SK 40 Head Cone DIN 69871 Main motor power 15 W Main torque 130 Nm Equipment Automatic tool loader INCLUDED No. of positions in tool loader 38 Internal cooling 80 Bar INCLUDED Tank with paper filter 200 l. INCLUDED Active cooling control cabinet INCLUDED Infrared measurement probe part M&H INCLUDED Blum Laser Probe Measurement Tool INCLUDED Chip evacuator INCLUDED Cleaning gun with pump 2 bar 40 l/min INCLUDED 3D Quick ...

Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe

Lot of 7 Kennametal machining tool assemblies/tool holders in original-style protective storage containers. Made in Germany. Auction-ID: A7-50717-213

5-axis machining center Hedelius RS 805 K Control: Heidenhain iTNC 530 Year of Make: 2011 Internal machine no. 78 Travels: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 12,000 rpm Accessories: - SKM 900 inclined bed coolant system - IKZ 25 bar - Chip conveyors - Handheld operator - Blow-off guns - Rinsing guns