machines used for sale

TUGRA RING BENDING MACHINE TYPE PK 20 - Asdiameter 20 mm - Draait right-en leftom - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109

Trotec Speedy 400 Co2 Laser 80 Watt air-cooled Year of construction: June 2015 • Immediately ready for use • 6 months warranty on all machines Working area: 1,016 x 610 mm Max. workpiece height: 305 mm • Only 2853 operating hours Scope of delivery: • Trotec Laser Speedy 400 year 2015 • Software JobControl 11.4 / Ruby incl. license key •Connecting cable • Aluminum lattice table • Lens cleaner • Lentil cloths • Allen key set • Lens set •Manuals On request: • Unwinding device • Trotec extraction • Slat table • Engraving table • Honeycomb grid table • Training and commissioning • Delivery by transport company Dimensions: width/depth/height (approx.) 1400 x 950 x 1070 mm Air support: By using an air compressor heat and gases are removed from the cutting surface blown away, resulting in a better cutting result can ...

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Control CC 100 for ENGEL injection moulding machines

OSTAS SEEPAGE MACHINE TYPE KMRP 1.2 - Capaciteit 1.2 mm - Uitlading 250 mm - Met 8 sets roll - Voetbediening - Remmotor - Noodstop - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3 MTA S.p.A. TAEevo Tech 201 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. And built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 23.69 Max. current (A) 39,83 Starting current circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200393994 Year of construction 20 ...

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder Another 400 bakery machines in stock!

AYEL-TECH SAEULENBOHRMASCHINE TYPE Z5040 - MK4 - Electromagnetic automatic voeding - 50/1450 t/m - Draait right-en leftom - Tapfunctie - Uitlading 180 mm - Panel 560 x 560 mm - Tandwielaangedreven - Koeling - Beschermkap - Noodstop - Verlichting - 400V DUTCHMACH Metalworking machines Blggiyikaf ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH SAEULENBOHRMASCHINE TYPE Z5040E - MK4 - Electromagnetic automatic voeding - 50/1450 t/m - Draait right-en leftom - Tapfunctie - Uitlading 180 mm - Panel 560 x 560 mm - Tandwielaangedreven Blgg0uo2sb - Koeling - Beschermkap - Noodstop - Verlichting - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder More TOP bakery machines in stock!

AOKI One step PET injection stretch blow molding machines for jar

Spiral kneading dough machine Kemper model: SP 150 ALH with 2 extendable tank wagons Kneading machine for max. 250 kg dough Cover hood with protective circuit with 2 timers and 2 gears Lifting and lowering via control Hand and automatic operation E-plant NEW DGUV V3 tested Connection 400V, 50 AMP, 63A-CEE plug Used machine overhauled Visit our Milbrandt Outlet with show bakery and many bakery machines!

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 351P3-20 MTA S.p.A. TAEevo Tech 351P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, electronic expansion valves, phase monitoring, buffer tank 350 ltr., built-in P3 circulation pump and speed-controlled fans. Cooling capacity kW 66.9 Cold water temp. Exit/Entry (°C): 7 / 12 Medium: Water Volume flow (m³/h) 11.4 Available pump pressure (bar) 3.02 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 37.48 Max. current (A) 64,44 Starting current circuit (A) 208.53 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1065 Connection Rp 2" Serial No.: 2200372599 Year of construction 2021 ...

Quark balls or spray pastries of the ball portioners are Serving small amounts of homogeneous masses for filling patisserie products in small-volume production,all in manual operation. Robust design, easy to clean. Dosing quantity infinitely adjustable. All parts in contact with the filling compound are made of stainless steel or food-grade plastic. with stainless steel stand Visit our Milbrandt Outlet with many machines and equipment!

Labeling machines fully automatic Krones Etima Solomatic Machine Krones Labeliernaschine Solomatic Chest torso back 3- leimagregate 3- cold glue pump Power 28,000 FL/h Control Siemens S7

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...

AYEL-TECH SCHWENKBIEGEMASCHINE TYPE CKL-H 1260 x 2 - Capaciteit 1260 x 2 mm - Bovenmes in segments - Hydraulic buigen - Voetklemming - Afstandbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over transverse guideway370 mmSwing diameter over guide ways700 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Transverse stroke276 mmLongitudinal stroke755 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 110 - Capacity 1070 x 4 mm DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Tenon beater, slotted and tenon milling machine FESTO Type: ZA101 5 Aggregates 2 x sawing unit 3x milling unit Guide carriage Mitre stop adjustable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance ...

Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.

EDDA packing machine, packing machine, pallet cutting machine, automatic wrapping machine ROBOWRAP EDDA wrappers are recognized as the best solution in the field of packaging. Modern Edda wrappers, based on the latest technologies, thanks to their strong mechanical design and the required systems ensuring operator safety, meet the EU requirements and are CE certified. Standard control system components come from top brands such as Siemens, Schneider and LG Industrial. The machines are designed for a long service life and do not contain any parts from the Far East. Edda wrappers are designed for packing products in PE bubble wrap, PE foam film and shrink wrap. The ROBOWRAP wrapper is ideal for packing: Pallets Large packages, cartons Door Specifications: Machine dimensions L x W x H: 1100 x 600 x 2200 Weight: 490 kg Battery Voltage: 24V DC Power supply: 220 V ...

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40 x 100 (liters) Filling capacity: 3000 kg / h Stuffing pressure: 35/50 bar Porting speed: portions size 25 - 450 portions / min portions size 50 - 375 servings / min portions size 100 - 280 servings / min portions size 200 - 190 servings / min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Year of production: 2006 The stuffer can work with all popular types of casings: natural casings, collagen Clipper Poly-Clip Type: PDC 700 For calibers with a diameter of: 30-115 mm For all covers: Plastic, fibrous, collagen and natural Mobile machine: on a trolley We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/30 -EB 2 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty More bakery machines in stock!

The condition is as good as new. The device was only used for one test in 2005. The AERO-LÄP method makes it easy to achieve a highly smooth and glossy surface without damaging the surface structure. By applying a unique technology, AERO LAP enables high-gloss finishing for irregular shapes of punches, dies, pens and small shapes. STANDARD ACCESSORIES - Standard machine complete with nozzle, centrifuge, air connection and all the equipment needed to operate 400 V, 50 Hz - CE version - Mixer unit for processing the multigrain -Gloves - Operating tools, cleaning brushes, etc. - Instruction manual in local language - Instruction and maintenance manual, electrical wiring diagram - Machine painting Standard Okamoto silver grey Options Mixing bowl 4 pieces Multi Corn Multi Liquid Multi Powder (Pure Diamond Powder) Overall dimensions: Width: 750 mm Height: 160 ...

Flake ice machine + storage silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice machines of the MAJA RVH-CO2 series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. This is because CO2 / R744 is one of the natural refrigerants, without any influence on the depletion of the ozone layer or the greenhouse effect. Specifications: Year of construction: 2019 Ice capacity approx. 1500 kg / 24h Water consumption 1.50 m³ /24h Required cooling capacity to - 20.0°C / 1.8 kW Refrigerant CO2 / R744 Width 1695 mm / Depth 512 mm / Height 525 mm Weight 175 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Overall dimensions of the system: H223 x W180 x D125 cm Machine design Ice generator unit (rotary evaporator) without refrigeration unit for direct ...

Packaging machine Dixie Union Packaging Machines modular - Function 1: Deep drawing - Function 2: Sealing - Function 3: Vacuuming - Function 4: Printing - Packaging size max.B/ L/H: 270 x 320 x 100 mm mm - Total power: 15 kW - Machine weight: 1600 kg - Space requirement (W x D x H): 6.8 x 1.0 x 1.8 m - Condition: very good details PA/PE film packaging/paper packaging e.B. for medical devices with cliché print Soft blister, machine was in use until dismantling accessories Flexographic printer (cliché printing) AMACO DV 120, Y.O.M. 1998, documentation

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...

Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central  ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 4000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Cazeneuve HB500 rebuilt lathe. Distance between centers: 2000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.