25717 offers

maximum number of results exceeded > 1000
please refine your search

Category: 201: saws
New in: 2001
Price: 17.900 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Panel saw Striebig standard III 6206 vertical Masch. No. 31368 Engine No. 63623 Connected load 7,0 kW Built in 2001 L x W x H: 6665 x 1756 x 2882 mm Available from approx. February 2019 Price does not include installation The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 402: packing machines
New in: 2009
Price: 66.600 EU€
Location: Land-pl PL
Seller: Kennedy Machines

The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.

Category: 107: sheet metal working
New in: 1998
Price: 22.900 €
Location: Land-de DE 91460 Baudenbach, Frankenfeld 4
Seller: Kran Kral

Hera SML 2500 x 4 folding machine BJ. 1998 CE ID available Kant length 2500 mm x 4 mm thickness mechanical back gauge with selected GeiÃ?fuÃ?schine for C profile. (1000mm, 700mm, 400mm, 200mm, 100mm, 90mm, 80mm, 70mm, 60mm, 50mm) Siemens control system Simatic OP7 Up to 10 consecutive bending steps can be saved. Hydraulic tool clamping. Dimensions 3800mm x 1300mm x 1850mm Weight of machine 4000 KG The folding machine comes from the possession of the authority and very little was used. (Training purpose therefore technically and visually in a very good condition.) The machine was serviced regularly by an authorized workshop and, if necessary, repaired, The machine  ...

Category: 2:
New in: 480491117
Price: request quote
Location: Land-ht HT http://www.kennedymachines.com/photo/maszyny/906_6.jpg
Seller: Kennedy Machines

http://www.kennedymachines.com/photo/maszyny/906_2.jpg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-uk UK 0 Kilmarnock, North Halket, Lugton
Seller: SBS Ayrshire Ltd

G Richards and co Manchester vertical boring machine

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Drying oven (1x), Make Nabertherm, Type W-1000/H, No 154942, New 1999, Max. temperature 1340 Degr. C., Number of compartments: 1, Capacity 1000 Ltr, Internal width 800mm, Internal depth 1600mm, Internal height 850mm, Electric heating, Electric capacity 75 KW, 400 Volt, Number of doors: 1, With switchgear, Floorspace 2,4x1,6 M, Total height 1,9 M, Weight 2850 KGDRYING OVENSDRYERS > DRYING OVENS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-uk UK 0 Kilmarnock, North Halket, Lugton
Seller: SBS Ayrshire Ltd

Unit completely refurbished by KMPT in 2010 and been stored unused in warehouse since then

Category: 103: milling machines
New in: 1984
Price: request quote
Location: ab Lagerstandort Non EU
Seller: Kemmerich Werkzeugmaschinen GmbH

max. wheel diameter: 238 (260) mm tooth width: 60 mm max. module: 10 min. module: 1,5 min. workpiece diameter: 12 mm min/max. pitch cone angle: 0 - 85 ° cone distance: 130 mm no. of teeth: 6- 99 blade cutter head diameter: 600 mm number of blades: 2 x 36 total power requirement: ca 18 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 2,4 x 1,8 m 2 Machines available in a package year of make 1984 & 1986 Machines are both dismantled and stored

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE 58642 Iserlohn, Bergstr. 14
Seller: IMDAT-WERKZEUGMASCHINENHANDEL

Single column - eccentric press Fabr.WEINGARTEN type: XPR 2 BJ. 1956 Pressl. 100t Machine is technically and mechanically on the current state. Further data see machine card.

Category: 107: sheet metal working
New in: 1991
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 1270 mm plate thickness: 2,00 mm pre-bending: 0: 90 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,00 x 0,90 x 1,20 m Equipment: - motorized rear roller delivery - Right- and left-hand rotation - can also be used as ring bending machines (various roller sets available)

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-ee EE 51014 Tartu, Ravila 51
Seller: Rovita

Used, in working condition

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Reactor (1x), Make Hagemann GmbH Beckum, No 88/0093, New 1988, Material stainless steel (1.4439), Capacity 8200 Ltr, Useful capacity 6300 Ltr, Vessel sizes dia. 2000x1800mm, Dished bottom, Dished top side, Manhole dia. 500mm, Top connections (13x), Outlet dia. 100mm, Working pressure vac/3,2 bar, Test pressure 4,2 bar, With jacket (250 Ltr), Working pressure 16 bar, Test pressure 22,1 bar, Max. temperature 200 Degr. C., With anchor stirrer, Motor 17,5 KW, 500 Volt (Ex), Speed mixing shaft variable, Floorspace 2,5x2,5 M, Total height 5,7 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any  ...

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE 58642 Iserlohn, Bergstr. 14
Seller: IMDAT-WERKZEUGMASCHINENHANDEL

Single column Exenterpressen 2.Stück identical in stock Fabr.WEINGARTEN AG Type: AR160 BJ. 1970 Pressl. 160t Machines are electrically and mechanically in the technically current State. More info see machine cards.

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 60 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1500 mm Description: Travel length between 500 and 600 mm, pneumatically controlled, serves for automatic removal of sprues on injection moulding machines, YOM 2007 & 2008

Category: 210: window production machines
New in: used
Price: 950 €
Location: Land-de DE 97941 Tauberbischofsheim, Ernst-Bauer-Str. 3+5
Seller: OCHMANN Holzbearbeitungsmaschinen

Foot operated, see annex, technical modifications reserved PDF specifications.

Category: 104: grinding machines
New in: 1986
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Cylindrical grinding machine, external cylindrical grinding machine, CNC wave grinding machine, CNC cylindrical grinding machine - peak height / width 140 x 1,000 mm -Control, Fabr. Siemens Type 840 D -Abilt spindle -Reitstock, hydr. -Measuring device type Marposs T25 -ca 20x different grinding wheels -Machines lighting -Cabin -Cooling lubricant device -Oil mist suction

Category: 210: window production machines
New in: used
Price: request quote
Location: Land-de DE 97941 Tauberbischofsheim, Ernst-Bauer-Str. 3+5
Seller: OCHMANN Holzbearbeitungsmaschinen

600 013 fitting drill STRIFFLER type 2795 H, handle olives and pot band drill, fence height: 1,600 mm, contact surface with flaps stops: 3,000 mm, drill head Ayen DS21, 5-3, Dietz 1.5 kW Motors (DR 90 S 2 P).

Category: 1200: machines and plants for process engineering
New in: used
Price: 320 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Automatic burner control, Burner Control -Manufacturer Kromschröder -Type IFD 258-10 / 2W -1x machines available -Prize piece -Dimension 112/75 / H122 mm -Weight 0.7 kg

Category: 1300: other machines and plants
New in: 2010
Price: 7.900 €
Location: Land-pl PL 25-66 Kielce, Olszewskiego 20
Seller: Tegeno

Central coolant system Knoll

Category: 2200: surplus goods
New in: used
Price: 200 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-ee EE 51014 Tartu, Ravila 51
Seller: Rovita

2 speeds 2 bowls 12 kW renovated

Category: 1200: machines and plants for process engineering
New in: used
Price: 380 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Automatic burner control, Burner Control -Manufacturer Kromschröder -Type TC 410-10T -1x machines available -Prize piece -Dimension 115/100/H120 mm -Weight 0.4 kg

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-ee EE 51014 Tartu, Ravila 51
Seller: Rovita

Category: 207: gluespreader machines
New in: used
Price: 550 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 210: window production machines
New in: used
Price: request quote
Location: Land-de DE
Seller: OCHMANN Holzbearbeitungsmaschinen

Crosscut saw: 3 kW, 2.800 rpm, long nozzle and slotted spindle: clamping length 640 mm, 15 kW, without tools, more data see Appendix, Special price for self and the self dismantling.

Category: 107: sheet metal working
New in: used
Price: 3.950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

mobile pliers for pressure joining, mobile clinching pliers, clinching technology, -slight and lightweight shapes, closing at ducting -hydraulically driven -max total sheet thickness 4 mm -2 pieces of machines available -Prize piece -Dimensions 680/540 / H860 mm -Weight 182 kg

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-ee EE 50411 Tartu, Vinkli 15
Seller: Rovita

cream depositor; depositing quantity: 30-300 ml; hopper - ca. 30 l; nozzle - Ø 22 mm;

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Reactor (1x), Make Hagemann GmbH Beckum, No 87/0106, New 1987, Material stainless steel (1.4439), Capacity 8200 Ltr, Useful capacity 6300 Ltr, Vessel sizes dia. 2000x1800mm, Dished bottom, Dished top side, Manhole dia. 500mm, Top connections (13x), Outlet dia. 170mm, Working pressure vac/3,2 bar, Test pressure 4,2 bar, Half coil jacketed (250 Ltr), Working pressure 16 bar, Test pressure 22,1 bar, Max. temperature 200 Degr. C., With paddle stirrer, Motor 17,5 KW, 500 Volt (Ex), Speed mixing shaft (variable), Floorspace 2,5x2,5 M, Total height 5,7 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shippin ...

Category: 303: blow moulding machines
New in: 2000
Price: request quote
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

Blow Molder KOSME KSB 4000 for PET bottles 4 000 bph Manufacturer: KOSME Type: KSB 4000 Capacity: 4000 bph in 1.5 ltr Bottle size: 0.1 – 2.0 ltr PET Bottle max dimensions: 110 mm diameter, 340 mm height Year: 2000 Total power: 50 kW heating, 52 kW installed Heating modules: 4 Adjustment areas: 8 Nominal air pressure: 10 bar / 40 bar Dimensions: 4600 x 1700 x 2500 mm Weight: 5500 kg approx. Accessories: Preform bunker, preform erector and chiller included

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Table length: 8500 mm Table width: 1200 mm Longitudinal X: 7400 mm Cross Y: 1250 mm Vertical Z: 2000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 PB MACH-id    4179 MAKE         Zayer Spain TYPE          30KM YEAR         2005 SPECIFICATIONS X - Travel        7400 mm Y - Travel         1250 mm Z - Travel           2000 mm Controll      TNC 426  PB Table Length x Width     8500 x 1200 mm Table load in kG     30000 Kg Spindle Taper     ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-ee EE 50411 Tartu, Vinkli 15
Seller: Rovita

Category: 109: other metal working machines
New in: 2006
Price: 45.500 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 204: grinding machines
New in: used
Price: 2.900 €
Location: Land-de DE 97941 Tauberbischofsheim, Ernst-Bauer-Str. 3+5
Seller: OCHMANN Holzbearbeitungsmaschinen

Engine: 12.5 of kW, working width: 230 mm.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Reactor (1x), Make De Dietrich, Type AE-4000 L, No 62998, New 1999, Material glass lined (3009 U), Capacity 5374 Ltr, Vessel sizes dia. 1796x1520mm, Dished bottom, Dished top side, Manhole dia. 500mm, Top connections 5x dia. 150mm + 2x dia. 250mm, Outlet dia. 100mm, Working pressure vac/6 bar, Test pressure 9 bar, With jacket (677 Ltr), Working pressure vac/7 bar, Test pressure 12 bar, Max. temperature -25/+200 Degr. C., With propellor stirrer, Motor 11,0 KW, 230/400 Volt (Ex), Floorspace 2,4x2,4 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to ...

Category: 842: paper converting: die cutters
New in: 1996
Price: request quote
Location: Land-de DE 41564 Kaarst, Bruchweg 100
Seller: CUTECMA e.K

REF. 4/6 BUILDING 45A 1996 machine no. 96131 embossing print: 30KN Max insert height between table and trailer plate: 35mm voltage: 400 V / 50 Hz embossing plate: 2 pieces cliche plate: 125 x 125 mm available immediately located: Düsseldorf / Germany

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Classifier system, Make Mikropul gmbh, Type ACM-10, Material stainless steel, Grinding room size dia. 310mm, Fixed hammers, With grinding track, Inlet dia. 50mm, Feeding with rotating valve, Motor 7,5 KW 380 Volt , 1,1 KW 220/380 Volt, Mounted on frame, With switchgear, Floorspace ± 3,3 x 2,2 M, Total height 2,7 M, Weight ± 1600 KG, Extra Specifications 1x ventilator Van Tongeren kennemer type S395/3/4800 11KW, 400/690 Volt, 1x dosing screw dia. 225mm 0,37 KW, 220/380 Volt, 1x dustcollector Donaldson TDP675 230 Volt, 1x cyclonefilter :Van Tongeren kennemer type AC850/3.0, 1x cabinet. + OVERHAULED +SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth:  ...

Category: 842: paper converting: die cutters
New in: 1996
Price: request quote
Location: Land-de DE 41564 Kaarst, Bruchweg 100
Seller: CUTECMA e.K

REF. 4/5 BUILDING 45A 1996 machine no. 96132 embossing print: 30KN Max insert height between table and trailer plate: 35mm voltage: 400 V / 50 Hz embossing plate: 2 pieces cliche plate: 125 x 125 mm available immediately located: Düsseldorf / Germany

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Colloid mill (1x), Make Brogli (Collovelox), No 2121, House material stainless steel, Rotor material stainless steel, Rotor sizes Dia.75-140mm, With hopper 15Ltr. Dia.400mm, Outlet Dia.25mm, Motor 5,5Kw.380/660Volt, With switch, Floorspace 0,8x0,7M, Total height 1,3MCOLLOID MILLSGRINDERS > COLLOID MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 842: paper converting: die cutters
New in: 1990
Price: request quote
Location: Land-de DE 41564 Kaarst, Bruchweg 100
Seller: CUTECMA e.K

REF. 4/2 BUILDING 45A 1990 machine no. 90373 embossing print: 30KN Max insert height between table and trailer plate: 35mm voltage: 400 V / 50 Hz embossing plate: 2 pieces cliche plate: 125 x 125 mm available immediately located: Düsseldorf / Germany

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Victory mill (1x), Make Hosokawa Micron, Type VP-4, No 420135, New 1973, Material stainless steel, Rotor size Dia. 630x400mm, Fixed hammers (60 flat hammers), Hammer width 400mm, With grinding platens, Inlet 400x400mm, Motor 55 KW, 380 Volt, Speed 2650 Rpm, Mounted on frame, Floorspace 2,2x1,8 M, Total height 1,8 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 105: saws
New in: used
Price: 480 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Circular saw Manufacturer Kaltenbach Type TL 250 Year unknown Ma. No. 14620 Saw blade 250 mm With limit switch and base Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a s ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Reactor (1x), Make Coti Srl Almé (Bergamo), No 0159, New 1996, Material stainless steel (304), Capacity 2350 Ltr, Vessel sizes dia. 1200x1680mm, Dished bottom, Dished top side, Top connections (5x), Outlet dia. 50mm, Working pressure vac/3 bar, Test pressure 4,5 bar, Half coil jacketed (94 Ltr), Working pressure 4 bar, Test pressure 6 bar, Max. temperature 210 Degr. C., With paddle stirrer make Mariotti & Pecini, Motor 1,5 KW, 220/380 Volt (Ex), Speed mixing shaft ± 56 Rpm, Floorspace 1,6x1,6 M, Total height 3,3 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide  ...

Category: 102: lathes
New in: used
Price: 349 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used revolving bezel for a lathe. The lower guide makes it a bit hard to turn (oil / clean) Max flow approx.: 110 mm Passage height approx. mid: 190 mm Base width: 400 mm Hole spacing on the foot approx.: 360 mm Pictures see more mass A bolt was missing at the bezel. This is an other screw with it which is a bit different-shaped. The bezel has traces of use. (slight rust, scratches) Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Cryogenic laboratory grinding line (1x), Make Hosokawa Alpine AG, Type 100-UPZ, No C-2118593, New 2011, Material stainless steel, Rotor size dia. 100mm, With grinding track, With hopper, Feeding with rotating valve Wirbelschnecken-Kühler D60x700, Motor mill 1,5 kW 400 Volt, With variable speed drive, Mounted on frame, With switchgear, Floorspace 2,0x2,0m, Total height 2,4m, Weight 690kgSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot C ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-uk UK 0 Kilmarnock, North Halket, Lugton
Seller: SBS Ayrshire Ltd

two kearns-Richards se 180 good condition still in situ and available January 2019.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Cryogenic laboratory grinding line (1x), Pin disc mill /plate beater, Make Alpine Augsburg, Type 160-UPZ, No 5151.1, New 1988, Material stainless steel, Rotor size dia. 160 mm, Feeding with vibro feeder en Messer Griesheim Wirbelschnecken-Kühler D60x700, Motor mill 7,5/9,0 kW 380-420/440-480 Volt, Mounted on frame with Filter and Ventilator, With switchgear, Floorspace 2,5x1,5m, Total height 2,7m, Weight 1000kgSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visi ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-de DE 58642 Iserlohn, Bergstr. 14
Seller: IMDAT-WERKZEUGMASCHINENHANDEL

Universal milling machine Fabr.RECKERMANN type: combined 900 pony BJ. 1987 with 3-axis digital display HEIDENHAIN Spindle retainer: ISO40 H/V Procedures: X720mm Y200mm Z350mm Table size: 1070mmX400mm Machine is in good condition by the tooling. Machine card see more data.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Multi-wheel air classifier Mill, Make ALPINE A.G./ Henco & Co., Type ATP200 / 4ATP, No unknown, manufacturer tag is missing, New +/- 2006, Material mild steel inside ceramic-coated, Solid cone rotor 4x classifierwheel ceramic, Rotor size 4x dia. 200mm, fine 5µ - 120µ, Motor 4x 7,5 KW, Speed 4x 6000rpm, Mounted on frame, Floorspace 2,1x2,1 M, Total height 4,0 M, Weight 3900 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for man ...

Category: 301: injection moulding machines
New in: 2007
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform-Injection Molding System with the capacity to also produce heavier preforms (up to 55 g) on 72-cavity-tooling with the biggest injection unit on board available for this platform (extruder screw diam.140 mm. The "package"includes: one resin drying and dehumidifying combo: DryPack, model DP1100/11, with 6,500-l-silo designed and made by EISBAER-Trockentechnik GmbH. The combination needs less power and less space and is easier to set up.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Grinder Multi-wheel air classifier mill, Make ALPINE A.G./ Henco & Co, Type ATP200 / 4ATP, No manufacturer tag is missing, New +/- 2006, Material mild steel inside ceramic-coated, Solid cone rotor 4x classifierwheel ceramic, Rotor size 4x dia. 200mm, fine 5µ - 120µ, Motor 4x 7,5 KW, Speed 4x 6000rpm, Mounted on frame, Floorspace 2,1x2,1 M, Total height 4,0 M, Weight 3900 KGSIZE REDUCTION MILLSGRINDERSGRINDERS > SIZE REDUCTION MILLSGRINDERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM f ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)