machines for food used for sale

Dikon, buckets 3l, 5l, 10l The line consists of: 1. Semi-automatic bucket welding machine with filling dispensers. Manufacturer Dikon Type-LWB-003, 2. Washer-blower 3. Sato labeling machine Model: M-8485Se 4. Elektronicsystem detector Model: ES-IMD-I-4028 with a stand. 5. Inclined downhill receiving table Mechanical efficiency - 300-800 packages per hour

Grunwald line no. I, buckets 3l, 5l, 10l, from point 10: 1 Station for manual feeding of buckets 2 Dosing station 3 Welding and cutting station 4 Device for applying lids 5 Pressing station 6 Bucket collection station The machine is adapted to the specific requirements of working in wet conditions. All drives are built into the machine body in a covered manner, under the table plate. The machine body is covered on the sides with transparent safety glass panes. The body, table plate and all stations mounted on it are made exclusively of stainless steel or anodized aluminum. The drum motor moves the plate conveyor and the product-safe bucket conveyor in rhythm. All driving movements of the stations are performed using cam and lever mechanisms as well as pneumatic actuators. The work and drive area has been designed in a clear and practical way. This area is protected on all side ...

Gastro line for manual foiling of 3L DiKon buckets semi-automatic bucket welding machine Year of production 2016 Basic voltage 400V Control voltage 24VDC Electricity protection 4kW Compressed air demand 10.00 m3/h Dimensions: Width 672mm Length 1780mm Height 2047mm Total weight 350kg

-Thermal oil boiler -Manufacturer: HTT / Heuft (overhauled in 2000) -with gas burner -Type: WTO100D -Year of construction: 1992 -Heating capacity: 125 kW -Ab. Operating overpressure: 8 bar -Ab. Operating temperature: 300 C -Capacity: 53 liters -Operating voltage: 400 volts -Connected load: 4.6 kW -Rated current: 8.5 A -overhauled by Heuft in 2000

-Power 125 kW -Ab. Operating pressure: 8 bar -Ab. Operating temperature: 300 C -Content. 53 liters -min. Vol. Str.: 6m3

General SKU334U821 LocationBarneveld MakeKek Kemutec TypeCM 220 No.B 32844 Year of construction11-2006 Main Features MaterialStainless steel Motor4 KW Width220 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 220x150mm Sieve sizesDia: 220x180 Sieve perforationDia:3mm (3x) InletDia:145mm Motor4kW, 400Volt, 1425rpm (ex) Speed1425 rpm With extra sievescheck MaterialStainless steel 1.4306 (304L) Information Total height0,75m Weight200kg Floor space1,1x0,53m ATEX compatiblecheck Extra SpecificationsThe product bucket has a diameter of 300 mm and a height of 300 mm. Bucket volume: ±20 liters. Powdered foodsSieve granulatorsKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

Built in AISI 304 stainless steel and in accordance with EEC standards, the machine is ideal for filling a wide range of solid products, also particularly difficult, whole, in small or medium-sized pieces in cans, jars, plastic containers. ... The filling process is carried out with the most advanced technologies that ensure the precision of the dosage, guaranteeing automatic operation and high speed without any damage to the product. All the operations of change of format and washing of the machine are carried out quickly and functionally. At the customers request it is possible to make the tangential exit of the containers. RODUCTO Tomato (whole, chopped) - Olives (whole, sliced) - Legumes - Vegetables (whole, chopped) - Carrots (chopped,

Luciani modèle dl 5,5 - volumetric dosing machine for liquid and semi-dense products (edible or mineral oils, syrups, fruit juices, condensed milk, etc... ) with capacities from 1 to 5,5 liters with capacities from 1 to 5,5 liters (u 10 liters with two dosing cycles). Electrical cabinet without hopper (available a stainless steel hopper to adapt) dimensions: 600x800x1800- kg 440

Technogel 4000E Rotary filling machine Year 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

Thermal oil boiler Heuft HK230 - Thermal oil boiler - Manufacturer : Heuft / OHL Apparatebau & Verfahrenstechnik GmbH - Type: HK 230 - Thermal oil boiler with gas burner - Heating capacity : 230 kW -Ab. Operating pressure. 4 bar -Ab. Operating temperature:300 C - Capacity: 118 L - Minimum flow rate: 9.5 - Operating voltage: 400 volts 50 Hz - Control voltage: 230 volts - Connected load: 11.6 kW - Nominal current 22.5 A - Year of construction: 1998

Turbo Rotary Rotary filling line, Serial: R0061192, 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph

Shredder für Food More then 300 machines new and second hand on our seema .de

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.

Box forming machine APE BAG IN BOX | FORMA BB HM Year: 2012 Speed: 1.000 cartoni/h Machine without gluer Safety protections.

Box forming machine TMG | FORMEC Year: 2002 Speed: 5.000 bph Gluer NORDSON Safety protections

Box forming machine SGE | 2007 Year: 2007 Speed: 8.000 bph Model: Formacartoni Gluer included Safety protections

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Case erector MONDO & SCAGLIONE hot melt mod.378-C Year: 2006 Speed: 6/25 C/MIN Hot melt Gluer System PREO PLC Siemens S7 Safety Protections

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Box forming machine MONDO&SCAGLIONE Model: 376/c. Year: 1996. Speed: 23 cycle/minute. Gluer NORDSON. Type of clousre: glue. Manual available. Safety protections.

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection

Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.

Box forming machine SIAT – 150 C/H Year: 2015 Speed: 10 C/minute Closing box with adhesive taps. Safety protections.

Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.

Box forming machine MONDO&SCAGLIONE | 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/C Formation of the horizontal carton Gluer NORDSON Safety protections

Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections

Box forming machine OMA | 40 HM Year: 2009 Speed: 6.000 bph Gluer Safety protections

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used

MF-25 Corner Forming Machine

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Formingmachine for meat rolls (frikandellen afkorter) Belt width: 700mm With outfeedbelt

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

Punching nibbling machine

Quark balls or spray pastries of the ball portioners are Serving small amounts of homogeneous masses for filling patisserie products in small-volume production,all in manual operation. Robust design, easy to clean. Dosing quantity infinitely adjustable. All parts in contact with the filling compound are made of stainless steel or food-grade plastic. with stainless steel stand Visit our Milbrandt Outlet with many machines and equipment!

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower