subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
Stock # UG6398 Unused horizontal sand mill with contact parts made of abrasion-resistant stainless steel, manufactured by TEST Sp. z o.o. (Poland) model MP-100. The machine has a 100-liter milling chamber. The mill is equipped with a rotor with abrasion-resistant discs. The machine is belt-driven by an electric motor with a power of 55 kW, 1450 rpm, 400 V, 50 Hz, and IP54 rating. The mill is equipped with a feed pump, electrical control panel with frequency converters and zirconium balls with diameters ranging from ø 1.4 mm to ø 2.7 mm. Included full technical documentation. Year of manufacture: 06-2023.
Stock # U2471-1 Used horizontal vacuum paddle dryer by Drais (DE) model TR100. Contact parts designed in duplex stainless steel (AISI 1.4462). Drying chamber has internal dimensions: diameter 500 mm x length 595 mm. Total volume of chamber about 117 l. Drying chamber is designed for work on pressure range from -0,98 bar / 63 bar. Test pressure - 83,9 bar. Working temperature up to 220 C. Side walls and front door are jacketed. Total volume of jacket 24 l, working pressure 5 bar, temperature up to 220 C. Chamber doors are mounted on moveable arm and are bolted on 18 clamps. Inside drying chamber there is single shaft with 4 welded ploughs. Shaft is belt driven by gearbox and el motor 18,5 kW, 1470 rpm, 400 V, 50 Hz in Ex design (EExdeIICT4). Top feeding inlet with diameter 200 mm, central bottom discharge with manually operated valve with diameter 100 mm. Machine is mounted on carbon s ...
Vacuum blade dryer manufactured by FMC OISSEL, with a volume of 6000 liters. Material Stainless Steel 316/316L Technical characteristics Year of manufacture 1972 Working Body Pressure Atm bar Working Body Temperature 130 ºC Total Body Volume 6000 L Half-calf/liner working pressure 3 bar Half-round/sleeve working temperature 130 ºC Half-calf/shirt volume 1200 L Coil Working Pressure 3 bar Transportation Information Length 6000 mm Width 1900 mm Status In your state Manufactured by F.M.C. OISSEL
Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER
Nucha dryer filter manufactured by BONAZZI MARIO, model BM 12000, with a total volume of 18050 liters. Material TBD Technical characteristics Model BM 12000 Year of manufacture 2001 Status In your state Manufactured by BONAZZI MARIO
Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)
60.000 litre, Stock number: T4010, Litre: 60.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a skirt with bracing and strengthening, Top: Conical, Bottom: Conical, Tank cover: 2 pcs, in the top, Ø 480 mm. and in the side, 430 x 530 mm., Agitator: Prepared for agitator in the side, Inner diameter: Ø 3400 mm., Total height: H 7700 mm., Manufacturer: Kolding DDMM
New 50.000 litre tank, Stock number: T50B6-1, All weldings inside grinded grain 60., All weldings out side sandblasted., Tankdimension Ø 2900 x cylinder 7500 mm., The tank is made of pickled plate type B2., Density: 1,0., Working temperature 0 -+50° C., Working pressure: None, Scoop of application: A, Litre: 50.000, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing
New 50.000 litre tank, Stock number: T50B4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing
New 30.000 litre tank, Stock number: T30B4-1, Litre: 30.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bottom Ø 2½”, Inner diameter: Ø 2500 mm., Cylinder: H 6000 mm., Total height: H 7100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,05, Working pressure: None, Manufacturer: Handing
Container Specifications - Type: Standard 20ft dry shipping container (ISO) - Year of Manufacture: 1999/2000 and 2005/2006 - Material: Full corten steel construction - Gross weight: 30,400 kg - Lashing points: yes, fitted - Condition: Used Find more here - / Contact us at -
Manufacturer: Motan Model: Gravicolor 100 Type: GC 100-P-Z Year of Manufacture: 2008 Type of Machine : Dosage Unit Condition: Used Electrical Data - Supply voltage: 1N/PE 230 V, 50 Hz - Power consumption: 0.26 kW - Rated current: 2.5 A - Control voltage: 24 V DC - Delayed fuse: 10 A Find more here - / Contact us at -
Manufacturer: BvL Model: Rotocleaner RC 1950 RW 2T Year of Manufacture: 2008 Type of Machine : Cleaning System Operating hours: approximately 18,505 hours Key Features - Dual-tank system: separate wash tank and rinse tank for superior cleaning results - Wash basket diagonal of 2319 mm, allowing cleaning of large and small components - Maximum usable length: 1545 mm - Maximum usable width: 1545 mm - Maximum usable height: 1000 mm - Load capacity: 750 daN (approximately 750 kg) - Operating voltage: 3 x 400 V, N+PE, 50 Hz Wash Tank Specifications - Tank capacity: 825 litres - Electric heating: 24 kW - Spray pressure: 4.5 bar - Wash pump: FHE 40-200/75 GLRD SiC/SiC-Viton, 7.5 kW - Level control: LIQUIFANT FTL 260 - Coarse filter: 2 mm - Detergent dosing: Membrandosierpumpe Alpha 1001 Rinse Tank Specifications - Tank capacity: 825 litres - Electric heating: 18 kW - Spray pressure: ...
659 litre, Stock number: T4040, Litre: 659, Material: Stainless steel AISI 305, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 415 mm., Turbolence plate: Yes, Agitator: Yes, Agitator type: 3-bladed propeller, Agitator placement: From the top, Motor: 0,55 kW - 220/380 Volt - 221 rpm., CIP: Yes, Working temperature: 120° C, Working pressure tank: 1 bar, Working pressure double jacket: 4 bar, Inner diameter: Ø 920 mm., Outer diameter: D 1090 mm., Total height: H 2135 mm., Manufacturer: Gjettermann & Nielsen A/S, Year: 1991
Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989
200 litre, Stock number: T4028, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Conical, Inner diameter: Ø 500 mm., Total height: H 1520 mm., Manufacturer: Alfa Laval, Model/type: Vacuum tank type DD, Other: No condenser
Machine Specifications - Type: Double cone mixer - Capacity: approximately 1,000 kg - Control unit: circa 2005 Condition and Equipment - New paintwork - New storage blocks for mixing containers including bearings - Supplied without CE marking and documentation Find more here - / Contact us at -
General SKU029F122 MakeEMDE Industrie- Technik Nassau TypeKH-300 + MDRD-120 + C-250 No.A 106.0212 Year of construction2006 Mounted in framecheck With 2 containers (dia. 800mm), type C-250 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillers Lifting + tilting machine/Container emptying station/vibro feeder (1x) Powder filler/Container emptying station/vibro feeder (1x) Dosingscale 15 KG Capacity250 Ltr. Dosing with vibro feederscheck With motor0,55 KW, 230/400 Volt Information LocationBarneveld Mounted on wheelscheck With switchgearWith vibro feeder type MDRD-120 Floorspace2,1x2,0 m Total height2,1 m Weight920 kg Extra SpecificationsContainers in stainless steel 1.4301 (304)DiscountPowder fillersEmde NassauDiscountPackaging machines > Powder fillersBrand > Emde Nassau What you can expect from ...
Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.
Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.
Used 6-stage evaporation station made by B&P Engineering. New 2006. In addition, concentrate cooling station by Ciat. New 2005. Capacity 24.000 liters/hour.
Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.
General SKU279X360 MakeFluitec TypeContiplant Pilot No.69371 Year of construction2019 Mounted on legsOn frame Pressure Working pressure30 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume0.4 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity4x 0,1 l. Top connectionscheck Outletcheck With jacketcheck volume each 0,3 l. Information LocationBarneveldStainless Steel ReactorsFluitecReactors > Stainless Steel ReactorsBrand > Fluitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...
General SKU400W1578 MakeFlottweg LocationSold CEcheck TypeZ4E-4/451 Main Features MaterialStainless steel Motor37 KW Specified Features - Decanter 2-Phase decantercheck Screw diameter420 mm Screw length± 1650 mm InletDia. 50 mm Liquid outletDia. 150 mm Solids outlet500x300 mm Motor37 kW, 400 volt, 2955 rpm Max. rotor speed4200 rpm MaterialStainless steel Information No.012.386.09 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace3,50x1,00 m Total height3,94 m Weight9000 kg Extra SpecificationsInside 20” container, total dimensions 6,06x2,50x2,70 m, : max sediment density 1,4 kg/dm3, product temperature 0/100°C, Siemens touchscreen control DecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...
Dosing and mixing system model VS-3K, further information on request.
Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.
General SKU249Y198 LocationBarneveld MakeComi-Condor Main Features MaterialStainless steel Motor0.75 KW Inlet diameter15 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesø 150 x 250 mm Max. loading weight5 kg Liquid outletDN25 Motor0,75 kW 400 V 1350 rpm (Ex) With variable speed drivecheck Max. basket speed3000 rpm MaterialStainless steel 1.4306 (304L) Information Serial2371 Magento base g_extra_specificationsdia 250mm Information TypeTaurus No.2371 Mounted on foundation platecheck Mounted on wheelscheck With switchgearcheck (as is) Floorspace0,7 x 0,6 m Total height0,9 m Weight300 kgBasket centrifugesComi-CondorCentrifuges > Basket centrifugesBrand > Comi-Condor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
General SKU013X039 MakeHeinkel TypeHF-300 No.1013/12 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Motor1.35 KW Inlet diameter300 mm Specified Features - Basket centrifuge Basket centrifugecheck Inverting filter centrifuge Basket sizesdia. 300mm Max. loading weight8,2 kg Hydraulic drivecheck With hydraulic unitcheck Max. basket speed3464 Rpm MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck (as is) 1,2x0,4x1,5m 250kg and 0,6x0,4x0,8m 100 kg Floorspace1,7x1,1 m Total height2,1 m Weight1000 kgDiscountBasket centrifugesHeinkelDiscountCentrifuges > Basket centrifugesBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...
General SKU071F406 MakeFima Process GmbH TypeTZT-400x300 No.20300211 Year of construction2003 Mounted on framecheck Main Features MaterialHastelloy Motor7.5 KW Inlet diameter400 mm Specified Features - Basket centrifuge Basket centrifugecheck dryer Perforated basketcheck Capacity37 Ltr Basket sizesdia. 400x300mm Max. loading weight20 kg Motor7,5 KW, 400 Volt (Ex) Max. basket speed1800 Rpm With jacketcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information LocationBarneveld Floorspace2,5x1,1 m Total height1,3 m Weight2000 kg ATEX compatiblecheckDiscountBasket centrifugesFima ProcessDiscountCentrifuges > Basket centrifugesBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
