machinery used for sale

Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 100 mm max. module: 1.75 Workpiece length max.: 100 mm Pitch min.: 6 max.: 400 Milling cutter speeds: from: 200 rpm up to: 2400 rpm Feeds: axial from: 0.05 mm/r up to: 1.0 mm/r Voltage 50 Hz 3x: 380 Volt Power: 1.50 HP Machine´s weight about: 660 kg Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1300 mm Fabrication de filetages: Tangent gear cutting

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 10 mm max. module: 0.5 Workpiece length max.: 35 mm max. gear wheel width: 15 mm Pitch min.: 6 max.: 180 Axes distance between work- piece and tool: min.: 0 mm max: 28 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 6 from: 850 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.32 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 630 mm Width: 530 mm Height: 1350 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 36 mm max. module: 1.00 Workpiece length max.: 80 mm max. gear wheel width: 50 mm Pitch min.: 6 max.: 200 Milling stroke: 10 mm Gear hob: max. diameter: 32 mm Milling cutter speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Feeds: stepless up to: 60.0 mm/r Voltage 50 Hz 3x: 380 Volt Power: 0.70 HP Total power required: 1.2 HP Machine´s weight about: 680 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Coolant system

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 35 mm max. module: 1.00 Workpiece length max.: 22 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: stepless from: 850 rpm up to: 5200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 600 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1450 mm Various accessories: Automatic loader Lamp

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: HUAWIN (FANUC / SIEMENS optional) Technical data Work capacity:max. diameter: 60 mm max. module: 1 / 1.5 Pitch min.: 6 max.: 390 Max. milling cutter displac.: 60 mm Milling cutter speeds: from: 300 rpm up to: 3000 rpm Max. milling head inclination: +/- 45 ° Feeds: axial from up to: 1000 mm/min radial from up to: 1000 mm/min Power: 0.75 kW Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1800 mm Width: 1730 mm Height: 2300 mm Various accessories: Set of gears Lamp Coolant system

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 35 mm max. module: 1.00 Workpiece length max.: 22 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: stepless from: 850 rpm up to: 5200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 600 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1450 mm

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0 Technical data Polishing disc: 3 x Speeds: from: 300 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 840 mm Height: 1930 mm Various accessories: Suction plant: ELBARON RON/60 SV

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0 Technical data Polishing disc: 3 x Speeds: from: 300 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 840 mm Height: 1930 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 45 mm max. module: 1.00 max. gear wheel width: 45 mm Pitch min.: 6 max.: 180 Milling cutter speeds: number (steps): 8 from: 900 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.50 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 600 mm Width: 500 mm Height: 1300 mm Various accessories: Coolant system Dividing plates

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm Various accessories: Loading attachment: W 19

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm

Linear blow molding equipment for sale with a capacity of 6000 bottles/hour for 0.5 pet containers and 4000 bottles/hour for 1.5 pet containers. There are guarantees, no defects. Main equipment parameters 3500, 0 × 1450, 0 × 2000, 0 Release year 2020 Country of origin Shanghai, China, all packed and ready to ship. The price includes all the necessary additional equipment for the full cycle of production of pet containers. There are also 4 bottle designs included. We can connect everything at your facility and make start-up equipment. 1. Automatic feeding of the preform to the blow molding machine 2. High pressure compressor 3.2M³/3.0MPA 3. Low pressure compressor 2.0M³/1.0MPA 4. Dehumidifier and air purifier 5. Air buffer for 500 bottles. 6. Preform cooling equipment. 7. Filters Includes 4 preforms (included in the price) 1. Presform 500ml 4 bottles (2  ...

Technical data Execution: Single polishing machine Speeds: from: 1300 / 2600 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1 kW Machine´s weight about: 50 kg Overall dimensions machine: Length: 800 mm Width: 400 mm Height: 1200 mm Various accessories: Cast-iron base

Diameter: 400 mm Klingelnberg - AFK 151 Spiral bevel gear cuting machine Ø 400 x Mod 6 MACH - ID 6237 Make: Klingelnberg Type: AFK 151 YOP: 1960 Max. Diameter   400 Ø Modu    l6 mm Dimensions Length    3.000 mm Width      2.200 mm Height     2.000 mm Weight     6.900 kg

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Eddy current separator from Bakker Magnetics 104 E The latest eccentric eddy current "104" X Ecentric Magnetics has been specially developed and designed for the separation of fine particles from, for example, bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has the highest number of poles on the market, namely 104 (!) and operates at a speed of 3,600 rpm. The 104 rotor produces an astonishing field frequency of 1.56 kHz Production width 2 meters wide

ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump        Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump

Rock.Zone RR 300 asphalt milling machine, cutting head width 300mm, drive power 30KW, dead weight 450 kg, operating pressure 210 bar, total length 860mm, the machine has been used only lightly, very good condition

MOSCA Pallet Packing Press Automatic Pallet Packing Press, Model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads, the second strapping head can be moved laterally. The press has an upstream, walk-in centering roller conveyor with turnstile. There is another turnstile under the press, which can be used to rotate the pallet before strapping. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1600 mm Specifications: Infinitely adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Closure Type: Friction Weld Closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. vertical clearance: 1,600 mm Max. throughput width: 1,500 mm Length of the printing plate: 1,600 mm Pr ...

Cyklop XZE-311 Strapping Press Year of construction: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Belt guide distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strapping force of the strapping unit: adjustable up to 2000 N Press force: adjustable from 5 to 48 kN Aggregate Type: CFH 1

ID3238 Benninghoven 3 to TBA year/Year of construction 2008 Asphalt mixer Asphalt Mixer

Cyklop Strapping Press / Cyklop Pallet Press Year of construction: 2012 Type: XZE 30.2-18 DT Package: Length LL: 1,200 mm Width BL: 800 – 1,000 mm Height HP + HL (incl. pallet): 350 – 2,200 mm Weight: 50 – 1,500 kg 1 piece driven roller conveyor with centering Length: 1,950 mm Usable width: 1,100 mm Lifting height: 400 mm Roll diameter: 89 x 3.25 mm Roll sheath surface: galvanized Roll pitch: 150.8 mm Load: 1,500 kg Drive voltage: 400/230 V Centering Orientation: Centric Min. usable width: 600 mm Usable width max.: 1,200 mm Centering beam length: 1,400 mm

Article number: 22-99-014 Manufacturer: Beveling machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of manufacture: unknown L x W x H: approx. 1500x1000x1000mm Weight: approx. 500kg Max. chamfering diameter: approx. Ø60mm Speed range: approx. 62-210 rpm Accessories  Anfas Tool Other accessories on request Price and other technical data on request

Article number: 22-99-010 Manufacturer: Beveling machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1200x600x1300mm Weight: approx. 300kg Other accessories on request Price and other technical data on request

Sander Vario Master 9480 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9480  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

ander Vario Master 9460 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9460  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

Approx. Onsite Dimension. (l x w x h): 400 x 420 x 30 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 320 x 310 x 50 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 300 x 310 x 70 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 200 x 190 x 60 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 380 x 50 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 300 x 310 x 70 mm, weight approx.: 15 kg

ID3274 Sandvik Ranger 500 with HLX 5 T Hammer approx. 6000 hours/hours Hammer approx. 3000 hours/hours Machine with fire damage, cabs burnt out, otherwise everything is in order Machine with fire damage, driver's cabs burned out, otherwise everything is fine

horizontal contour cutting machine, second-hand manufacturer: Günter Eiselt Model: KONTUREX Standard year of construction: 2003 cutting width: 1250 mm cutting length: 3000 mm Cutting height: 1300 mm Wire length: 7400 mm Table size 3000 x 1250 mm horizontal contour cutting machine, including vacuum table and suction unit; torsion-resistant steel frame construction, mobile table unit. All data without guarantee (excerpt from catalogue text) Price: 1.500 EURO, net. Pricing in EURO. This is a used machine. All prices are understood net prices without, packing, loading, shipping or any dutys. Delivery condition: Ex fundament at location of working in Germany, non-binding time of delivery: at short notice, after payment for 100% Payment condition: 80% advanced for contract placing; 20% before loading offer validity: Subject to sale and mistakes Please, contact us for getting more informat ...

MACHINERY CO2 1610 WiFi 160 W laser was built by the Polish company Technologie CNC in 2019. The machine is designed for engraving materials made of glass, ceramics and marble, as well as cutting such materials as acrylic and plywood. The machining process is performed on a large work table with a length of 1600 mm and a width of 1000 mm, using a powerful CO2 laser, guaranteeing high cutting speeds as well as the highest precision and quality of machining. The laser engraving machine supports the most important graphic formats such as DST, PLT, BMP, DXF, AI and the most popular graphic programmes such as CorelDraw, AutoCAD or Photoshop. The installed WiFi module allows for wireless communication with the machine. Along with the MACHINERY CO2 1610 WIFI laser engraving machine, equipment is offered consisting of an unused knife table and rotary axis, a CW 5200 liquid cooler and a dust e ...

Bottling Lines - Bottling Machinery - Complete Bottling Lines - Bottling equipments: BERTOLASO SIGMA 606: Year: 2000 Speed: 8,000 bph Sense of travel: Time Caps: - Satin cork cap - Mushroom cork cap 6 heads Various formats available. Safety protections. CODE: X 108

MBF FILLMATIC 35 taps used. Speed: 5,000 bph. Direction: Hourly. Gravity fill.

Acquaint used COSTEC 24 pliers. Speed: 6,000 bph. 24 tongs rotary carousel. Fixed rinse ugello. No bottle no spray system. Stainless frame safety protections.

Used tappatotor AVE 6T LUX cap. Speed: 10,000 bph. Direction: Time. 6-headed round-the-rail. Head for lux cap application. Machine management via plc siemens s7 and touch screen. Machine-side dashboard. Safety protections under EC.

Used rinser machine BERTOLASO SBR NECKRINS 60 clamps Direction: Clockwise Mobile washing system nozzle. Safety guards. Motorized height adjustment head. Various change format of bottle.