136,727 used machines on RESALE, but how to find them? Machine Search
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg
Force gauge, force measuring device, calibration, force measurement technology, scale, crane scale, hanging scale -Manufacturer: dynafor , tensile force measuring device crane scale -Measuring range: up to 20 t -Dimensions box: 490/160/H160 mm -Total weight: 12 kg
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg
Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg
Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg
Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg
Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg
Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg
Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg
Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)
Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested
We offer formwork girders from Doka & Peri H20 and H24 inspected and sorted - ready for immediate use. Doka Beam I tec 20: Doka Rental Storage Quality - €6.50 per linear metre The I tec 20 composite formwork beam is a solid wall girder with a special structure in accordance with DIBt approval and innovative polyurethane final reinforcement for lower material use and extended service life. Doka Carrier H20 top P: Doka Rental Storage Quality - €6.00 per linear metre The resistant formwork beam in solid wall construction High-quality, robust, durable – the Doka H20 top P beam is a durable solid wall beam with a web made of a special flat pressed panel, which can be used in wall and slab formwork systems. The innovative polyurethane final reinforcement reduces damage and guarantees up to three times longer service life. GT 24 lattice girder: 5,00€ per linear metre Wel ...
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift -Free-view mast -Load capacity: 2000 kg -Lifting height: approx. 4000 mm -Forklift shield: 1150 x 405 mm -Dimensions: 350/1150/H2620 mm -Weight: 720 kg
Component size: Length 1700 x Width 1050 x Height 1050 mm Printing method: The patented VFGF (Variable Fused Granulate Fabrication) technology is a further development of pellet 3D printing with variable nozzle opening. It prints in high resolution only where necessary, for example on visible surfaces, and efficiently fills inner areas with thicker webs. In this way, VFGF combines the advantages of FDM (Fused Desposition Modeling) for fine details and complex geometries with those of granulate printing (high application rates, material variety, lower costs). Intelligent algorithms ensure the right amount of material in the right place at all times, even for complex shapes with overhangs or support structures. Areas of application: For prototypes, individual parts, small series and also for higher quantities. By melting in a specially developed screw extruder, high throughputs ar ...
We offer a Doka Framax 270 wall formwork 260.15m² complete with accessories on request. New value of the formwork 188407,00€ Special net price 58545,00€ Accessories 14756,00€ New value approx. 31880,00€ The formwork was cleaned and checked. Partly new formlining. Original Doka rental warehouse quality Item No. Description 3 588103500 Framax Xlife element 2.40x2.70m 36 588100500 Framax Xlife element 1.35x2.70m 10 588122500 Framax Xlife-Uni-Element 0.90x2.70m 3 588122500 Framax Xlife-Uni-Element 0.90x2.70m 7 588102500 Framax Xlife element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 8 588105500 Framax Xlife element 0.55x2.70m 5 588106500 Framax Xlife element 0.45x2.70m 16 588108500 Framax Xlife Element 0.30x2.70m 1 588108500 Framax Xlife element 0.30x2.70m 12 588130500 Framax Xlife inner corner 2.70m 12 588126000 Framax outer corner 2.70m On ...
- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg
Diesel forklift, diesel forklift, forklift, 4-wheel forklift -Manufacturer: Hyster, Diesel forklift, 4-wheel forklift, type 4.50 XL -Load capacity: 4500 kg -Lifting height: 2820 mm -Tine length: 2000 mm, cross section 150 x 60 mm -Operating hours: 9473 h -Forklift dimensions: 3160/1410/H2225 mm -Weight: 6900 kg
We offer Dokadek element pallets with an 85% discount - Doka Mietlagerqualität 21 x Dokadek element pallet 0.81x2.44m, used - with 85% discount - 69,90€/piece 12 x Dokadek element pallet 1.22x2.44m, used - with 85% discount - 76,35€/piece If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89614 Öpfingen E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm -Weight: 81 kg
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Toyota, forklift mast, clear view mast from front forklift -Load capacity: 2500 kg -Lifting height: 3300 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2070/1160/H590 mm -Weight: 666 kg
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Still, Triplex mast for forklift mast from front forklift -Load capacity: 1600 kg -Dimensions: see photos / technical drawing -Dimensions: 1940/1050/H350 mm -Weight: 573 kg
Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm
Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm
Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer
A Hyster forklift is offered. Lift height: 5250mm, track width: 1130mm, load capacity: 4000kg, fork length: 1250mm, fork carriage/attachment width: approx. 1220mm, engine power: 65kW. Dimensions: X/Y/Z: 4150mm/1380mm/2440mm, weight: approx. 5880kg. An on-site inspection is possible.
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control
SEFA Pneumatic Large Format Press SLIDE-1285, Transfer Area 125 x 85 cm Bought at the beginning of 2021 - works perfectly - hardly used and in very good condition There is still a 5-year warranty on the heating element! Pneumatic Large Format Heat Press Pull-Out Worktop Extremely accurate temperature control +/- 1° thanks to multi-zone measurement technology Large touchscreen display 4 press programs can be stored, production counter - Transfer area 125 x 85 cm, for grouting of slabs up to a size of 120 x 80 cm - Digital time control 0 – 1,800 seconds - Digital temperature control 0-230°C - Contact pressure up to 386 g/cm² - Maximum material thickness 50 mm - Connection data: 12 KW, 400 VAC 3-phase, 20 A - Dimensions press: (WxHxD) 1286 x 794 x 2153 mm - Weight 419 kg The machine needs high-voltage current! Without guarantee and war ...
Forklift battery charger, industrial charger -Output: 36 volts -Power: 50 A -Connection: 220 volts -Dimensions: 560/350/H355 mm -Weight: 40 kg
Lifting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible.
ungheinrich EFX125 Narrow Aisle Forklift | 1,250 kg | 48V | 5 m lifting height | Duplex | Used For sale is a narrow-aisle forklift from the manufacturer Jungheinrich, model EFX125 SX120/500ZT-SF. The device comes from a site closure of a freight forwarder and has been regularly maintained. Technical data: • Manufacturer: Jungheinrich • Model: EFX125 SX120/500ZT-SF • Year of manufacture: approx. 2005 – 2012 (series produced during this period) • Operating voltage: 48 V • Battery: 660 Ah • Nominal load capacity: 1,250 kg • Lifting height: approx. 5,000 mm (duplex mast) • Battery weight: approx. 800 – 1,200 kg (typical for this device class) • Hours: 4776.6 Dimensions: • Width: approx. 170 cm (incl. wheels) • Length: approx. 310 cm • Height (mast retracted): approx. 312.5 cm Condition: • Used, good condition • Fully functional • N ...
Payload: 4000 kg Permissible total weight: 10790 kg Fork length: 1.2 m-2 m Lifting height: 3.45 m Recorded hours: 4577.77, still in operation
A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.
Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock
We offer a refurbished Dokadek - 159,63m² with 70% discount All elements are made with original Doka Xlife formlining. The formwork was only used 1 x, was cleaned and checked and is in top condition New value approx. 102,205.60€ Special net price: 30.661,68€ 10 Dokadek element 0.81 x 2.44m 47 Dokadek element 1.22 x 2.44m 25 Dokadek balance beams 2.44m 21mm 26 Dokadek balancing beams 1.22m 21mm 10 Dokadek balancing beams 0.81m 21mm 63 Dokadek Wall Head 66 Dokadek support head 10 Dokadek Corner Head 5 Dokadek's crosshead 3 Dokadek mounting rod B 1 Dokadek stripping tool 25 Dokadek suspension brackets H20 3 Dokadek wall brackets 5 Dokadek panel pallet 1.22 x 2.44m 1 Dokadek panel pallet 0.81 x 2.44m 2 Dokadek range of compensating beams 3 Doka reusable containers 1.20x0.80m If you have any questions, please call 0049 176 70044689, Mr. Becker. Purc ...
New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm
Printing technology: inkjet, ink technology: Epson UltraChrome HDR, color system: 11colors, max. printing resolution X/Y: 2880dpi/1440dpi, max. media format: 44inches/B0, media feed: roll paper/cut sheet, media thickness range: 0.08mm-1.5mm, interfaces: USB/Ethernet. Machine dimensions X/Y/Z: approx. 1864mm/667mm/1218mm, weight: approx. 116kg. An on-site inspection is possible.
Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.
Size: 520 mm Equipments: Exchangeable casettes format change system Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Inch printing unit inserts
Size: 520 mm Equipments: Exchangeable casettes format change system Web offset cassette: 2 x 24 Inch, 2 x 17 Inch Fountain water system Technotrans 4 Offset units Roll to Roll
Year of Make: 2015 Weight: 1,570 kg Auction-ID: A1-49964-64
Known defects: Brake must be overhauled! Auction-ID: A1-50026-78
maximum number of results exceeded
please refine your search
10 € 
