mac used for sale

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

2006 ROMI 33×80 Oilfield Hollow-Spindle CNC Lathe Manufacturer: ROMI Model: 33×80 Year: 2006 CNC Control: FANUC 21iT Application: Oilfield / Heavy-Duty Machining Main Specifications Swing over bed: 33” Swing over cross slide: 23” Chuck size: 24” Spindle bore / bar capacity: 10.5” Maximum turning diameter: 23” Maximum turning length: 90” Maximum spindle speed: 750 rpm Main motor: 60 HP Tailstock: Yes CNC control: FANUC 21iT Electrical: 480 V / 75 A FLA Approx. machine weight: 30,000 lbs Included Equipment 2 × chip pans — approx. 5’ × 11’ × 4’ — 1,000 lbs each Chip conveyor — approx. 4’ × 12’ × 6’ — 2,000 lbs Chiller — approx. 2’ × 2’ × 5’ — 1,200 lbs Hydraulic pump — approx. 2’ × 3’ × 5’ — 1,500 lbs Shipping Dimensions Main machine: 17’ × 8’ × 7’ — approx. 30,00 ...

Mobile sealing machine. Band width: 250 mm.

This 5-axis Makino A51-5XR HMC was manufactured in 2013. It features a generous travel of 22 x 22 x 23.6 and is equipped with a 60-tool automatic changer and a spindle speed of 14,000 RPM. If you are looking to get high-quality machining capabilities, consider the Makino A51-5XR horizontal machining centre we have for sale. Contact us for further details.

This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details.

This 4-axis OKK HM630 was manufactured in 2011. It features an X-axis travel of 1050 mm, Y-axis travel of 900 mm, and Z-axis travel of 900 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the OKK HM630 horizontal machining centre we have for sale. Contact us for further details.

Weibert WJ-CU-32 5-fold combi With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 320mm 3 knife shaft reversible knives (no more adjustment) Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Engine power: 3 motors 4KW 400V WY-500200 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information.

Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.

Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.

Short Description This facility will be available from the end of Oct 2026. A used CNC robot carpentry machine incl. mobile gantry trolleys. - Robot Kuka KR 240-2 C2000 Year of construction 2010 - Linear unit approx. 3m - Portal - 2 sliding slides 4.5x12m (connectable) - Cutting sizes 4.5m x1.2m x24m (height can also be raised to 2m with additions) - Refrigeration unit as good as new - Frequency converter as good as new - PLC Simens S7 - "Small control panel" PLC Simens S5 - Always maintained and checked, verifiable. - Table antieb has a Kuka motor - Under the table is a scraper bottom - 2x swivelling baffle wall - Protective fence 2-3 years old with light barriers etc. with 6 doors - Fence approx. 57m (on request and negotiable) - Additional 1 spare spindle, the same spindle as installed on the robot o Recording HKS 55 o 18KW o New revision parts for the spind ...

Weibert CU-41 Combine With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 410mm 4 knife shaft reversible knives (no more adjustment) Dressing table length of 1800mm Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4 KW 400 V WY-500300 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

ID3860 Wellco-Drill WD90 year/Baujahr 2007 approx. 1400 hours/hours Crawler-mounted drilling rig, very good condition, 6t pullback force, 3-stage flush pump, engine: Perkins diesel engine (131 kW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig; scope of delivery includes: WellcoDrill WD90 drilling rig, 34 x 3m drill rods, suction hose, suction strainer. Drilling rig on crawler chassis, very good condition, 6t retraction force, 3 stage mud pump, engine: Perkins diesel engine (131 KW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig, scope of delivery includes: WellcoDrill WD90 drilling rig, 34x 3m drill pipe, suction hose, suction basket

Weibert W7-41 Station wagon Planing width : 410mm Motor power: 3 motors 400V 2.2 KW Dressing table length: 1500mm Planing shaft: 3-reversible knife shaft Passage of 4-230mm Format sliding table 1500mm Cutting height: 103mm Saw blade 315mm swivel 90°-45° Milling machine: rigid 90° Milling machine rpm:1400/3500/6000 and 8000 rpm WY-500400 Illustration similar!

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Hagesana Cream Blower  Type: Cream King SF20 Year of construction 2001 Stainless steel boiler digital control with compressed air Emergency Off Switch Height: 130cm Width: 80cm Depth: 56cm

Glimek Dough Weigher Year of construction 2004 approx. 300-1200gram 1 chamber with large funnel with flourer Height: 180cm Width: 150cm Depth: 70cm

Paulimot SX4 milling machine with digital display and base frame For sale is a Paulimot SX4 milling machine in neat and fully functional condition. The machine is ideal for workshops, model making, prototype production as well as demanding hobby and small series work. Thanks to its stable construction and digital display, the SX4 enables precise and comfortable work on steel, aluminium, plastics and many other materials. Equipment: Paulimot SX4 Milling Machine Digital display / digital measuring system Stable machine substructure Stepless speed control Drilling and milling function Base frame Ready to use Technical data: Table size: approx. 820 x 240 mm Travels: X-axis: 450 mm Y-axis: 250 mm Z-axis: 320 mm Spindle holder: SK30 Stepless speed control Power supply: 230 V Condition: The machine is in used, well-maintained condition with the usual signs o ...

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A

CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details.

A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement.

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.

Yasda YBM 900N CNC Precision Horizontal 5 Axis Machining Center CNC control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 workpiece diameter x height 1400x1200 mm Travel X-Y-Z axis: 1800 mm A-axis (table inclination) +20 / -110 Travel of the B-axis 360° Spindle cone DIN 69871/50A Spindle speed 10,000 rpm Tool storage capacity 240 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

Filter tape rakes

MHME twin lane decorer / florette machine - used for broccoli In good working condition

Description: For sale is a professional and ready-to-use universal mixing pump / plastering machine of the type V.E.P. VR6. The machine is absolutely identical to the proven PFT G4. Spare parts, screws and accessories are therefore easily available everywhere and compatible across manufacturers. It runs extremely reliably because it does not have vulnerable electronics. It is an all-round carefree complete package including silo accessories and an enormous selection of mortar and air hoses. You can either fill the machine in the classic way by bagged goods or connect it directly to a silo via the blowing hood supplied. Technical data & highlights: Manufacturer: V.E.P. Baumaschinen Model: VR6 Connection: 400 V high-voltage current Year of manufacture: Unknown (nameplate available, runs perfectly) Application: gypsum plaster, lime-cement plaster, insulating plaster, flowing scr ...

We offer here a used fully automatic wrapping machine from BENHIL, type MULTIPACK 5000. Installed format 100x75x35mm, bottom folding. Suitable for filling volume 200-300g. Output: up to 135 cycles/min. depending on product and filling quantity. The machine was regularly checked and maintained according to the maintenance plan by technicians from BENHIL. The scope of delivery includes a discharge belt approx. 6m, pneumatic compensation cylinder and CIP device. Documentation and spare parts as far as available on site. The BH 5000 is still in production until approx. beginning of 2027. Subject to change and prior sale

We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China

This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details.

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

SPECIFICATIONS: TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530 plus) Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts sheet thickness of mild steel: 20 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 10 mm STANDARD: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Spraying device - Motion unit for high-precision machining - Additional highly dynamic axis Yp - Drives with maintenance-free three-phase servo motors - Closed beam guidance - Conveyors for small parts and waste - NitroLine - FlyLine - Penetration detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Logbook function laser CUTTING HEAD: - Laser cutting  ...

This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.

Continuous vacuum filler for straight filling and portioning Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Electric power: 9.5 KW Machine dimensions in cm: Width: 175 Length: 140 Height: 205 Delivery time: 20 working days after advanced payment

This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details.