140,790 used machines on RESALE, but how to find them? Machine Search
PLUNGE EDM MACHINE CDM ROVELLA MODEL: BF600 STROKE X: 600 MM STROKE Y: 400 MM STROKE Z: 350 MM CONTROL: HEIDENHAIN SUPPORT SURFACE: 800 X 550 MM TUB SIZE: 1400 X 870 X 500 MM
ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM
GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz ...
RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG
Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.
Electrical consumption: 4.0 kW average consumption: 3.5 kW mechanical Speed max. 100 Cartons/minute product power supply: max. 300 blister/min Size: A x B x H Min. 30x15x70 mm Max. 100 x 85 x 150 mm Folding machine Prospectus Guk sizes. 3000 x 1300 x 1660 mm compressed air consumption 4-6 bar without elevation 1-2 Nm3/h with prospectus 5-8 Nm3/h Leatus for prospectus code, case and prospectus presence
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...
Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg
Marchesini BA300 Continuous motion cartoner Automatic Bottle scroll infeed system Guk style leaflet folder Carton size range Width 25-100 Height 13-70 Length 78-150 Maximum mechanical output 250 CPM actual speed dependant upon nature of the product.
Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a ...
Broken Ice Machine + Silo & Ice Truck Manufacturer: ZIEGRA Type ice cream maker: ZBE 350 EV 20°C Silo type: ITS 700 Specifications: 400V / 50Hz / max. 1.0A Year of manufacture: 2023 Total dimensions: H249 x W85 x D125 cm Coolant: R 744 Ice machine for connection to a CO2 refrigeration system or individual unit Machine design Completely stainless steel Surface ground Output approx. 350 kg / 24 hours at 20°C air & 15°C water Silo capacity: approx. 700 kg Compact design Designed for continuous operation - 24 hours - 7 days a week Height-adjustable machine feet Stock machine, immediately available! Function checked / machine is ready for use! Condition and accessories see original pictures!
IWKA Model CP150 Automatic Horizontal bottle Cartoner. Capable of speeds up to 150 cartons per minute. Carton size: (Length) 20mm-90mm, (Width) 15mm-60mm, (Depth) 55mm-180mm. Set up for Reverse tuck style cartons. Has Embosse coding unit , GUK sheetfed leaflet feeder .
ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the ...
WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...
Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus
2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000
Max. size= 65 x 36 cm, Availability= 062025, 4 bags flat pile feeder with noise insulation devices tape delivery LOT Loaded in truck or container
InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...
Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Ess Type SquareARC 306 AC/DC Connection voltage 3 x 400 volts Adjustment range 5 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 230 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 ampere slow blow Dimensions L x W x H 950 x 435 x 980 mm Weight 120 kg Age approx. 10 years estimated without obligation Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20/Z, DD 12 mtr. long 1 piece ground cable 50 sqmm, 8 mtr. long 1 piece pressure reducer 1 piece spare parts box complete E ...
Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2
AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile
The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm
Blister machine Harro Hoeflinger model PFM 1 year of manufacturing 1992 . the machine has universal feeder , camera for product control . The machine has the following formats dimensions o blisters : 70 x 115 mm / 56 x 96 mm / 62 x 94 mm / 74 x 123 mm / 123 x 60 mm / 45 x 92 mm / 100 x 86 mm / 106 x 75 mm / 56 x 110 mm / 70 x 98 mm
Automatic labeller for the application of one vignette label on the upper panel of carton. Mechanical speed 400 cartons per minute
ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...
GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC ...
Power installed :11 Kw. Power consumption :5,5 Kw. Production :15, 50 strokes per minute for 12 mm depth forming 15, 40 storkes per minute for 28 mm depth forming Index :Max. 145, 222 mm Format range :forming area 220 mm length 188mm width Depth forming :12 and 28 mm, forming reel : 460 mm, covering reel :Max. 300 mm Forming thickness :Min. 0,1 mm, max. 0,5 mm Width covering foil : min. 90mm max. 210mm, of the internal reel : 70..76 water consumption :aprox. 0,1 m3/h. Compress air consumption :aprox. 6 Nm3/h , without pre heating :aprox.14Nm3/h, with pre heating
Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
4 axis vertical machining center for input shafts machining 2 pallets STAMA MC 325S 2 pallet with rotopallet Peiseler X=500 Y=300 Z=350 mm Rapids X,Y,Z = 40/40/45m 36 tools ISO 40 36-9000 rpm Table 950 x 800 mm CNC SIEMENS 840 N.2 double 4th axis Coolant through spindle Lavorazione input shafts (ex TRW) INTERESTING PRICE (package of 2 machines)
Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
PLASTIC MOLDING MACHINE FOR CONSTRUCTION POWER: 600 TON FLOOR FROM 1130 X 1130 MM SWITCHING BETWEEN COLUMNS: 730 X 730 MM
The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...
The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the ...
VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR
Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Commercial washing machine, used from 2019 Manufacturer: Multimatic GmbH & Co. KG, Maschweg 72-74, 49324 Melle, Germany, e-mail infomultimatic.de, Tel. +49 5422 100-0 Year of Make: 2019 Operating hours read: 4,854 Batches read: 5,923 Description For solvents trade name "Sensene" Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quali ...
Neri BL400 VTE tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons and 1 vignette/bollini label or similar on the upper face of the carton. Specifcation: - Labelling machine balcony construction stainless steel executed. - Electrical cabinet on machine board, Siemens S7-300 PLC controller with HMI touch screen - Laetus Argus 6012 bar code reader - Easy access from behind to electrical and mechanical parts - Positive transport of cartons with toothed belts. - Upper conveyor belt to keep carton stable during tamper evident seals application - Twin horizontal conveyor belt for products bunching at in-feed. - Mechanical timing device to dispense cartons on the main toothed conveyor belts. - Label dispensing with stepping motor drive. - Automatic work speed synchronization of motors. - Label length self-le ...
Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
maximum number of results exceeded
please refine your search
