We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,621 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Thermoforming machine for small cups of olive oil, ham, honey etc. Themachine make the full process with thermoforming, filling , sealing and cutting. PLC and Touchscreen, dosing with servomotor. Electric photocell for spot. Top brands in electronic components, as Omron, Datalogic, Panasonic, Schneider. Further information please contact. we produce it in Spain. The machine is tested some years ago, good thermoforming with PET, dosing with no dropping and good sealing and easy open. Production depending of each model.
used
- control: Heidenhain TNC 310 - table size: 320 x 250 mm - travel range: X= 400, Y= 250, Z= 400 mm - tool holder: ISO 40 dimensions LxWxH: 1600 x 1500 x 1900 mm weight: ca. 1200 kg
used
I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.
used
Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.
used
Tool holder: SK40 Travel X/Y/Z: 310 / 170 / 340 mm Speed range: Horizontal (16) 40 - 2000 1/min Vertical (16) 50 - 2500 1/min Spindle stroke: 60 mm Feeds: 9 - 450 mm/min Table size: 600 x 210 mm Projection: 133 - 320 mm Motor power: 1.6 / 2.9 kW Connection: 400 V, 16 A Weight approx.: 860 kg Dimensions approx.: 1150 x 1150 x 1680 mm Head swivel: 90° / 90° Equipment: - 3-axis digital display, brand: Elesta - Coolant base with pump - Machine lamp - Emergency stop push button - Drilling pinoles - Modernization 2017 - Operating instructions - Electr. Documentation
new
Sachet duplex machine for liquid, gel etc. New machine up to 80 sachet per minute, NON leaks system, good sealed sachets. Economic price and made in SPAIN, All electronics components PANASONIC.
used
Type MB6023HK Working width 230 mm Working height 150 mm 6 spindles B, R,L, T, T,B Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kW Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania
used
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
used
Outside diameter maximum: 90 mm Inside diameter maximum: 5 mm Pipe length maximum: 195 mm Angle degrees maximum: 40 Wall Thickness: 7 mm CNC Brand: _Unknown / Other CNC Model: CNC TOUCH Tube bending machineMacri - Provar 5 - 90 UD Controlled 5 axis A,B,Z,X,Y Axis Y,X,Z,B Accuracy 0,1 Gr Y, X, Z, B Maximum speed 6 M/Min Large tooling package with collet and die blocks Tooling 25.4 / 26.7 / 31.7 / 33.7 / 38.1 / 42.2 / 46.3 / 48.3 Tooling for steel & stainless steel Max.Tube Ø: 90mm Min. Tube Ø: 5mm Max. Wall thickness:7mm Max. Bending radius:195mm Min. Bending radius:5mm Max. bending length:3600mm Length: 6000mm Width: 2400mm Height: 2400mm Weight: &nbs ...
used
VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...
used
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available
used
FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm
used
FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.
used
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm
used
FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm
used
FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm
used
SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.
used
SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.
used
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm
used
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm
used
FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.
used
BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm
used
FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.
used
BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm
used
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
used
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...
used
FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.
used
FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...
used
Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm
used
• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop
new
Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)
new
Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)
used
Tube bending machines PROVAR 5-90 U-D, working length: 4500 mm The PROVAR 5-90 U-D (Series 90) is a fully automatic, 5 axes tube bending machine: bending (Y axis), advancement (X axis) and rotation (Z axis). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and lateral movement of the positioner and the mandrel (axes B1 and B2). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and has two levels of equipment per fixed and variable radius or two different fixed radii. The following are fitted as standard: - heat exchanger; - early mandrel extraction; - automatic mandrel lubrication.
used
Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...
used
Zalkin TM125 single-headed capping machine The maximum output of this equipment is about 3000 bottles / hour. The bottles are introduced by accumulation. Direction left -> right Current format: Plastic Cap: diameter 60.5 mm x 4.5 mm Aluminium Cap: diameter 62 mm x 4.5 mm 16-cell wheel: pitch diameter 530 mm / cell diameter 56 mm - Caps dispenser (vibrating bowl + dispensing chute taken on the fly) type ADV N?6430 and 6428. - Rotating table: feeding bottles Entry conveyor belt: 2000 mm / width 110 mm Belt at the entrance on the machine: 1500 m Exit belt: 500 mm Capping head 104 Voltage: 380 Volts 50 hz electrical box on the output side. 1 control cell for checking the presence of the bottle with plastic cap 1 control cell for checking the presence of the aluminium bottle cap. 1 accumulation detection cell 1 jam detection cell
used
Forming, filling and sealing machine for yoghurt cups Original ERCA packaging machine (FFS - forming, filling, sealing) type RK3. This machine was reconditioned in 1998 by the company CMA. Nominal output: 21,000 pots per hour. It is equipped with a decoration unit. A cutting tool for standard 63x63 mm cups with two formats X4 and X6. Heating is by radiation. The automaton is a series 7 from Schneider. Out of production : 2017 The machine is complete and in good condition.
used
- Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year:? 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available
used
Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg
new
Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)
used
It is a CNC profile machining center with compact design Cabinet moving on X-Y-Z-A axes. The spindle unit is positioned and machining independently at any temperature from 0 to 180 degrees. This is the fourth axis feature. It can process all kinds of profiles such as PVC, iron, steel, copper, especially aluminum. Different types of milling bits are used according to the hardness of the alloy it processes. It works freely on aluminum profiles with its fast milling head moving on the steel body equipped with CNC control unit and servo motor and 7-position tool changing magazine. The CADCAM software is a customized tool for âino machineryâ profile machining centers. The pneumatic reference point at the head of the machine is automatically removed and determines the zero point of the profiles.Profile clamping pneumatic clamps are offered as standard in the machine in 6 piec ...
used
The laser cutting machine KMT-2002 is manufactured on the basis of many years of successful experience in the production and operation of thermal cutting machines using the most effective technical solutions from European manufacturers.A distinctive feature of the machine is a rigid massive welded bed made of sheet, which is annealed to relieve stresses, which ensures long-term accuracy. The mechanical processing of the bed is carried out from one installation on a high-precision machining center. The design and construction of the bed ensures the absence of vibrations at maximum processing conditions (a common phenomenon on the machines of most manufacturers of the economy segment).
used
Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 à 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: â¤190 mm - maximum bottle diameter: â¤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: â¥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]
used
Description of knitting machine: o Circular knitting machine with 12 heads o Mechanical jog function o Electronic jog function o Braided head changer o Take the roller inverter o Rear arrangement of the final product â movement from front to back, left to right o Standard cylinder for 12 needles. Cylinders up to 18 needles on request. o Main engine 3/4 HP o Pulling motor 60W o Groz-Beckert knitting needles o Electronic yarn brake sensor o Coil holder with 12 positions o Cylinder rotation speed at 60 Hz, 2080 rpm CE standard Used materials: PE, Nylon, PP, Cotton, Eco Fiber, Spandex, etc. Final product: Laces for face masks, respirators, filters, sleeves, various types of laces We have 7 units with 12 cylinders and 5 units with 8 cylinders for sale. Netto price for 1 machine (with 12 cylindres): 9 000 euro
used
Posiadane oprzyrządowanie: 1. Profil płasko - owalny 90 x 55 x 2,6 - standard + zmienny - promień wewnętrzny 145 mm (łatwy sposób gięcia) 2. Profil płasko - owalny 60 x 30 x 2- standard + zmienny - promień wewnętrzny 135 mm (gięcie łatwy sposób) 3. Rura 60,3 x 2,9 - standard + zmienny - promień wewnętrzny 150 4. Rura 76,1 x 2,8 - tylko standard - promień wewnętrzny 152 W sumie posiadamy 7 kompletów matryc do gięcia i walcowania rur i profili. Charakterystyka: 5 osi sterowanych elektrycznie: Y= Gięcie X=Przesuw Z=Rotacja B1=Przesuw boczny zacisku B2=Przesuw boczny pilota Y Max. szybkość gięcia 0/1” – 150 Y Tolerancja +/- 0 – 0,1 X Max. szybkość posuwu mm 1” – 1.000 X Tolerancja +/- mm – 0,1 Z Max. szybkość rotacji 0/1”- 450 Z Tolerancja +/- 0 – 0,1 Max. średnica rury - 90X4 mm Max. średnica rury dla promienia zmien ...
used
Universal milling machine Macmon M200 (comparable to Deckel FP3) Built in 1971 Machine no. 628/2 X-axis travel 600 mm Travel Y-axis 310 mm Z-axis travel 390 mm Speed range 37-1900 rpm Feed in 3 axes from 7-380 mm/min Rapid traverse in all 3 axes Vertical & Horizontal Spindle Vertical quill and horizontal quill extendable - SK-40 Tightening system S20x2 Rigid clamping table Coolant system Operating instructions 3-axis Fagor digital display (X scale counts twice) The machine has been technically tested and is fully functional. Spindle concentricity 0.002mm Reversing clearance X-axis 0.75mm Reversal clearance Y-axis 0.7mm Reversal clearance Z-axis 0.2mm Footprint LxW: 1500x1500mm Weight approx. 1500kg
used
Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)
used
production extrusion line for the production of binder for baling from PP KIT TO THE FINISHED PRODUCT (AS SHOWED IN THE PHOTO) The line is from 2018 and it works flawlessly Are we looking for a strategic partner to sell an item Sale of the building 1000 m / 2 - price negotiable I am at your disposal for more information
used
LS Machinery LGH 850 M-GC Injection moulding machine LS Machinery LGH 850 M-GC
used
LS Machinery LGH 1050 M-GC Injection moulding machine LS Machinery LGH 1050 M-GC
used
LS Machinery LGH 850 M-GC Injection moulding machine LS Machinery LGH 850 M-GC