maag gear used for sale

gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 40 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: 580/250/H300 mm -Weight: 41 kg

Gear motor, electric motor, electric gear motor -Speed: 16.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: -Weight: 33 kg

Gear motor, electric motor -Speed: 83 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Weight: 56 kg

Gear motor, electric motor -Speed: 27/54/168 rpm -Power: 0.18/0.37/1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 33 kg

Gear motor, electric motor -Speed: 16 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 430/180/H220 mm -Weight: 19 kg

Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 530/240/H220 mm -Weight: 31 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor, electric gear motor -Speed: 83 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: mm -Weight: 51 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: SEW -Gearbox manufacturer: SEW -Motor power: 0.37 kW -Speed: 46 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: -Brake: 220 V -Dimensions: 550/180/H220 mm -Weight: 31 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Gear motor, electric motor -Speed: 14.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 35 mm -Protection class: -Quantity: 1x engine available -Dimensions: 620/212/H270mm -Weight: 44 kg

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 mm -Protection class: IP 54 -Weight: 27 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 65 -Number: 1x engine available -Dimensions: 680/270/H250mm -Weight: 55kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 610/260/H260 mm -Weight: 53 kg

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Key data: 800 mm, 16

good working condition

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.80 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: EX -Dimensions: -Weight piece: 44 kg

Gear motor, electric motor -Speed: 10.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight: 59 kg

Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Price: per piece -Number: 2x available -Dimensions: 580/260/H200 mm -Weight: 40 kg

Gear motor, electric motor, three-phase motor -Speed: 141 rpm -Power: 0.37 kW -Construction: B3 angle -Shaft: Ø 18 mm -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 320/143/H220 mm -Weight: 9.6 kg

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

gear motor, electric motor -Speed: 4 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 55 -Number: 1x engine available -Dimensions: -Weight: 73 kg

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.35/0.5 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 20.4 kg

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 31 kg

Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg

Gear motor, electric motor -Speed: 67 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.9 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27/117 rpm -Power: 0.12/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

max. wheel diameter: 85 mm gear width: max. 125 mm max. module: 3 Control: ja total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 30 kg

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 9x motor available -Price: per piece -Weight: 14 kg

Max. wheel diameter: 1600 mm Min. disc diameter: 800 mm Gear width: 560 mm Max. module: 16 Minimum module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine connected, can be tested. Machine equipped

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 20 kg