ma used for sale

New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.

MAJA SA 60 EL ice generator, performance approx. 60kg/24h. You are very welcome to test the machine in Koblenz, Germany.

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley & single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

Automatic Horizontal Cartoner Marchesini MA 352. Continuous motion horizontal cartoner, suitable for high speed packing in cartons of small bottles , vials , drops . Entirely built with a balcony structure, this machine?has all features and advantages of Marchesini cartoners: carton magazine in an optimum position, maximum accessibility, extremely fast change-over times,?minimal maintenance. Possibility of collecting the various rejects (product, carton, leaflet) in different containers, allowing improved recognition and control of the rejected items and easier, safer handling of rejects. General features: Balcony construction fully compliant with GMP standards ?All feeding units located in ergonomic positions. ?Mechanical parts in an oil bath to reduce maintenance and limit noise ?Reliable and fast ?Simple, fast size change-over, can be performed entirely from the machine front ?Touch S ...

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Laminating rollers Billhöfer Model 102 & 104 series and maybe others Year 2005 Qty available 1 set Available Direct

Magra-oil distributor Manufacturer: Magra Type: oil distributor / patch distribution Function: A safe switching distribution when several tanks and burners. Threaded ball valve with mechanical tank locking as a combined suction and return distribution. In very good condition!

Maja SA 85 S compact flake ice machine, ice output 85 kg / 24 h, with integrated condensing unit. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Maja SA 70 fragments of ice maker, ice power approx. 70 kg / 24 h, water consumption approx. 0, 07 m³ / 24 h, refrigerant R 404A. The machine can be visited like to 56070 Koblenz, and tested.

TOP STATE - UEBERHOLT IN 2020 ! Built: 2006 Table size: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. fast puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 24mm VA: up to 15mm free of oxide designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training always regularly maintained

Neri ETA 400S self-adhesive vignette labeller for top labelling of cartons or similar objects. Carton size range (lying flat) from 40 x 110mm (W x L) to 165 x 360mm (W x L). Label size range from 10 x 13 mm (W x L), to 90 x 250 mm (W x L). Infeed via 400-capacity carton magazine, carton discharge via shingling conveyor for easy carton removal. Includes PCE label presence control with rejection of faulty labels and rejection crosscheck. Capacity up to 250 cartons per minute.

Sieving machine

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

CARVING MACHINE type MARIANI PL 8 I Volt. 380/50 with Inverter rotary device for the simultaneous rotation of the model and the pieces (3D) manual chuck of mandrins unit also to work with flat pieces Technical Data : n. 8 spindles distance betwen spindles mm. 400 rotation speed by Inverter . rpm min. 9600 / max. 17400 max. working length ( on rotation ) mm. 2100 net weigth kgs. 2500 overall dimension mm. 5000 x 3000 H=mm.1500

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg

5000 PIECES / h

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

capacity 500 kg/h power 3 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 200 mm width 640 mm height 1 250 mm insertion resp. discharge height 1 250 mm weight 115 kg material 1.4301 / AISI 304 mash pump connection DN 65 AG stone discharge height 380 mm mash discharge height 340 mm suitable for stone fruit, berries scope of delivery 5 mm screen ; new machine - top condition

capacity 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ \" inside connection for washing bath 2 \" outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen ; new machine - top condition

Rated power up to 2000 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1600 mm width 700 mm He 210 0 / 2350 mm Hoehe Acceptance 800 mm Weight 200 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing groves 2 outside High fruit delivery 1545 mm ; New machine - best condition

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: The machine is  ...

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...