british flag
Resale Logo

m3 used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information metal forming machine tools  BSA GmbH  http://www.bsa-maschinen.de 
banner logo
start page > keywords m3 > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
1 2 3 4 5 <  page 6  > 7 8 9 10 11 12 13 14 15 16 17 18
125843093 1300

ROTARY SCREW Air Compressors for sale
Compressors


New Surplus Rotary Screw Air Compressors New Surplus Five (5) Rotary Screw Air Compressor Systems, 50 HZ, still in manufactures packaging, never assembled. Rotary Screw Compressors are available due to a cancelled proje ...

 
New Surplus Rotary Screw Air Compressors
New Surplus Five (5) Rotary Screw Air Compressor Systems, 50 HZ, still in manufactures packaging, never assembled. Rotary Screw Compressors are available due to a cancelled project. Great opportunity to purchase New Rotary Screw Air Compressors below new purchase cost
Two (2) DVK 133-GP-9300 Rotary Screw Air Compressor Systems
DVK 60
Bar PSI M3/min SCFM
7.5 110 7.2 254
10 145 6.4 226
13 190 5.4 191
2 x DVK 60 Oil Injected Rotary Screw Compressors mounted on platform
1 x DA 360 Heatless Desiccant Dryer
1 x DA 360 Heatless Desiccant Dryer
2 x GO500MX General Purpose High Efficiency Air Line Filter
2 x GO500MY Oil Removal High Efficiency Air Line Filter
2 x GO500MX General Purpose High Efficiency Air Line Filter
1 x All the equipment mounted on a platform and piping has been done
1 x D-MAT 8 Oil/Water Separator with support sheet-metal
1 x DHT 1 Wet Air Receiver
1 x Logik 103 External Multi Controller
1 x DHT 10 Dry Air Receiver
50 HZ frequency
Three (3) DVK 140-GP-1000 Rotary Screw Air Compressor Systems
DVK 125
Bar PSI M3/min SCFM
7.5 110 15.8 557
10 145 13.5 477
13 190 11 388
1 x DVK 125 Oil ?njected Rotary Screw Compressor
1 x DVK 125 Oil ?njected Rotary Screw Compressor
1 x DVK 125 Oil ?njected Rotary Screw Compressor
1 x D-MAT 30 Oil/Water Separator with support sheet-metal
1 x DHT 5 Wet Air Receiver
1 x Logik 103 External Multi Controller
1 x Compressor skid for 3 pcs DVK 125
2 x GO1820MX General Purpose High Efficiency Air Line Filter with support sheet-
1 x Collector for 140-GP-1000
1 x Cables, Cable ducts, solenoid valves, hoses for 140-GP-1000
1 x Cable ducts, solenoid valves, hoses , 133-GP-9300 collector
8 x Oil for compressors 20 liters x 8 pieces plastic can Total 160 liters oil
50 HZ frequency
 
Price  
  NA   request
125788202 102

WFL M30 for sale
CNC Turning- and Milling Center


turning diameter:520 mmturning length:1050 mmcontrol:840C total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2 Revolvers 12 fach, driven tools HSK 50 A, Tool changer milling spindle  ...
used machine
 
turning diameter:520 mm
turning length:1050 mm
control:840C
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m

2 Revolvers 12 fach, driven tools HSK 50 A, Tool changer milling spindle 96 pos., Chip conveyor Coolant unit
1998
Price  
    request
125837498 212

SULLAIR (HITACHI GROUP) S40E for sale
Compressors


Type S40E Worked hours 770 Working pressure 7,5 bar Air flow 4 m3/min Speed 3000 U/min Sound level 69 dB(A) Total power 30 kW Made in 1978 y. Transport dimensions 2400x1100x1300mm Weight 990 kg

 
Type S40E
Worked hours 770
Working pressure 7,5 bar
Air flow 4 m3/min
Speed 3000 U/min
Sound level 69 dB(A)
Total power 30 kW
Made in 1978 y.
Transport dimensions 2400x1100x1300mm
Weight 990 kg

 
1,500 €  
  LT   request
125788216 101

MAXION H40/2/VW/1 for sale
Drilling Machine


bore capacity in steel (diameter): mmthroat: mmbore stroke: mmtotal power requirement: kWweight of the machine ca.:4 tdimensions of the machine ca.: mTechnical specifications: H40 / 2 / VW / 1 ? Drilling capacity Z1. 3 ...
used machine
 
bore capacity in steel (diameter): mm
throat: mm
bore stroke: mm
total power requirement: kW
weight of the machine ca.:4 t
dimensions of the machine ca.: m

Technical specifications: H40 / 2 / VW / 1 ? Drilling capacity Z1. 3.0 kW ? Speed of axis Z1 approx. 2200 rpm ? Drilling capacity Z2 axis 1.1 kW ? Speed of axis Z2 approx. 450 rpm ? Tool holders of the SK40 drilling units ? mech. Travel distances of the drilling units 150 mm ? Programmable travel axis Z1 to 118 mm ? Programmable travel axis Z2 to 124 mm ? Tool holders of the drill heads KM32 (5 each) ? Overall height mm ? Total width 2445 mm ? Total length (without chip car) 3300 mm ? Total length (including chip wagon) 3570 (relative to the protective fence, without control cabinets, without hydraulic-pneumatic assembly, without opening area of the doors) ? Footprint of PLC control cabinet 1010 x 600 mm ? Footprint of robot control cabinet 900 x 600 mm ? Footprint Hydraulic pneumatic assembly 860 x 590 mm ? Total weight 4000 kg ? Operating voltage 400 V ? frequency 50 Hz ? Mains fuse / main fuse Machine 63 A ? Noise level at idle with maximum possible spindle speed <75 db (A) (Workplace-related emission value according to DIN 45635 part 1)
2014
Price  
    request
125837331 301

KRAUSS MAFFEI KM 16000/12000/390 MZ for sale
Injection molding machines


Angebot / Offer: ?> ?KRAUSS MAFFEI ? KM ?1600/12000/390 MZ > Robot Krauss Maffei included > ?year 2006? ? Technical Specifications: Clamping Force: 1600 ton Shot Weight (Max): 4727 g Distance Be ...
used machine
 
Angebot / Offer:

?> ?KRAUSS MAFFEI ? KM ?1600/12000/390 MZ
> Robot Krauss Maffei included
> ?year 2006? ?






Technical Specifications:
Clamping Force: 1600 ton

Shot Weight (Max): 4727 g

Distance Between Tie-Bars (H): 1850 mm

Distance Between Tie-Bars (V): 1400 mm

Platen Size (H): 2500 mm

Platen Size (V): 2100 mm

Screw Diameter: 105 mm

Control Type:Electronic MC4

Mould Height (Max): 2800 mm

Mould Height (Min): 1800 mm

Daylight Between Platens (Max): 4300 mm

Opening Stroke (Max): 2500 mm

Ejector Force: 14,20 ton

Core Pulls:Yes

Number Of Core Pulls: 6

Screw L/D Ratio: 23

Screw Speed: 158 rpm

Injection Volume: 5193 cm³

Injection Pressure: 2296 bar

Injection Rate: 1299 cm³/s

Nozzle Force (Max): 16,60 ton

Nozzle Stroke (Max): 600 mm

Oil Tank Capacity: 2740 l

Orientation:Horizontal

Other Specifications:
Closing unit:
Magnetic clamping system: Tecnomagnete
Mould height min 2 662 mm
IMould height max 2 1162 mm
Opening Strocke max 4192 mm
Mold min size min. H "x" v: 1240 940 mm
Mold max weight: fixed + weight Pl. 15000/18000 kg // Turning plate: 2 7500 kg
Fixing Plate h v Turning plate 1820 1380 mm
Centering flange DS Fest + Bew Pl. 120 mm // Turning plate: 250 mm
Centering flange sS Fest + Bew Pl. 250 mm // Turning plate: 250 mm
Thread in fixing plates: M24
Core pull automatic programmable

1st injection unit:
Screw type: HPS-M
RSP type: single ball
Hot-runner control points: 12 zones
Air ejector (DS / AS) 1 + 1
Pneu. Nozzle Control: Yes, cascade 4

2nd injention unit:
Screw: 35 mm
L / D ratio: 20 mm
Screw type: Standard
RSP type: multi-ball
Injection volume: 155 cm3
Injection weight: 141 g
Nozzle Strocke max: 161 mm
Injection pressure: 2429 bar
Nozzle pressure force 84 kN
Injection speed max 135 cm3 / s
Hot-runner control points: 4 zones
Air ejector (DS / AS) 1 + 1
Pneu. Shutter Nozzle Control: Yes, cascade 4 tray

Robot Krauss Maffei included
Control system: version 3.2.00
Year of construction 2006

PS: Machine in Stock !
2006
Price  
  AT   request
125745162 202

WADKIN UX 2612 F.LC.C4 for sale
Machining center CNC


3 axis CNC routerPlane matrixtable with sizes: 2780 x 1320 mm.Programmable movement in X, Y, Z: 2600 / 1250 / 250 mm.Feedspeeds in X and Y: 0 - 12 m/minFeedspeeds in Z: 0 - 6 m/minSpindle nose to table, min 0 mm, max. 25 ...

 
3 axis CNC router
Plane matrixtable with sizes: 2780 x 1320 mm.
Programmable movement in X, Y, Z: 2600 / 1250 / 250 mm.
Feedspeeds in X and Y: 0 - 12 m/min
Feedspeeds in Z: 0 - 6 m/min
Spindle nose to table, min 0 mm, max. 250 mm.
Head configuration:
Twin slide mounted head on variable centers up to 1300 mm (manual adjustment), each with:
1 x LC router, 3/4,5/6 and 9 kW (6000/9000/12000/18000 r/min)
1 x F router, 2,2/3 kW (18000 and 24000 r/min)
1 x Pneumatic drills
CNC controlls: Bosch CC 100
Vacuum: 2 x 80 m3/h
 
Price  
  BE   request
125823270 103

MAZAK AJV 60/80 for sale
CNC Portal Milling Centre


Used CNC Portal Milling Centre Mazak AJV 60/80 from 1995 The machine was built in 1995 but installed in 1996. CNC Control: Mazatrol M32a Table size: 1250 x 2240 mm Maximum table load: 4000 kg X-Axis movement: 20 ...
used machine
 
Used CNC Portal Milling Centre Mazak AJV 60/80 from 1995
The machine was built in 1995 but installed in 1996.

CNC Control: Mazatrol M32a

Table size: 1250 x 2240 mm
Maximum table load: 4000 kg
X-Axis movement: 2000 mm
Y-Axis movement: 1400 mm
Z-Axis movement: 508 mm
Maximum workpiece dimensions: 2240 x 1480 x 600 mm

Number of tools in magazine: 30x
Tool taper: DIN 69871A (ISO 50)
Spindle speed: 35 - 10000 1/min
1995
Price  
  NL   request
125745210 209

TYPHOON HAFZ-110 for sale
Dust filter unit


Closed dust filter unit for open air installation (with hot air reflow)4 bags underneath (450 x 1100 mm)Sleeve length: 3500 mmCapacity: 13700 m3/hFan with 450 mm inlet, 18,5 kW motorOverall sizes of filter 2,62 x 1,44 x  ...
used machine
 
Closed dust filter unit for open air installation (with hot air reflow)
4 bags underneath (450 x 1100 mm)
Sleeve length: 3500 mm
Capacity: 13700 m3/h
Fan with 450 mm inlet, 18,5 kW motor
Overall sizes of filter 2,62 x 1,44 x 6,14 m.
1982
Price  
  BE   request
125823260 1002

MPA R 4500 for sale
ROCK WOOL FACTORY


ROCKWOOL - ~ 4500 tonnes per year of rock wool Fuel: Oil Raw materials: Basalt Basic data of the 3 available lines: Established in 1984 1st power: 3 x 1500 tons / year 2. raw material per tonne Rockwool: 1,4 t ...
used machine
 
ROCKWOOL - ~ 4500 tonnes per year of rock wool

Fuel: Oil
Raw materials: Basalt

Basic data of the 3 available lines:
Established in 1984
1st power: 3 x 1500 tons / year
2. raw material per tonne Rockwool: 1,4 t basalt for Panel, 1.7 t for pipe insulation
3. personnel per shift: 9 + 1 for maintenance
4. fuel consumption per tonne Rockwool:... 200 kg of oil
5. power consumption per ton:.. 450 kW

The production lines are:
1 Panel production for 1500 tons / year for boards, thickness 30 to 120 mm, density 40-120 kg / m3.
1 quilted mat production line of 1500 to 3000 tons / year. Thickness from 25 to 100mm and the density 40-130 kg / m3.
1 quilted mat production line of 1500 to 3000 tons / year. Thickness from 25 to 100mm and the density 40-130 kg / m3.

ERICH PETER MACHINES PLANTS GMBH
A - 7083 Purbach - Austria
Tel.: + 43-664-3358378
machines-plants(at)speed.at
wewewe.machines-plants.at

 
250,000 €  
    request
125745057 209

REINBOLD AZR 600 for sale
Hogger - waste chipper


Hopper opening: 600 x 800 mmHopper volume: 0,6 m3Rotordiameter 252 mmRotorspeed ca. 90 r/minMotor 11 kW
used machine
 
Hopper opening: 600 x 800 mm
Hopper volume: 0,6 m3
Rotordiameter 252 mm
Rotorspeed ca. 90 r/min
Motor 11 kW
1999
Price  
  BE   request
125823222 301

MIR 84 PVG 90/TR for sale
Injection molding machines for rubber


Injection unit: EURMMAP classification 883V / 285 Screw diameter 38 mm Screw piston stroke 150 mm Screw speed 10-150 rpm. Screw Torque 950 nm Injection speed 80 cm3/sec. Theor. Injection volume 170 cm3 spec. Injec ...
used machine
 
Injection unit:
EURMMAP classification 883V / 285
Screw diameter 38 mm
Screw piston stroke 150 mm
Screw speed 10-150 rpm.
Screw Torque 950 nm
Injection speed 80 cm3/sec.
Theor. Injection volume 170 cm3 spec. Injection pressure 1800 bar
Nozzle contact force 46 kN
Screw cylinder heating power up to 3 kW
Number of heating zone 1
Machine tonnage 90 t

Clamping unit:
KN clamping force 883
Forms gap 420 mm
Distance between the boards of 520 mm
Tool height of min. 100 mm
Ground clamping table 1050 mm
Dimensions 350 x 400 mm plates
Heating plates 3 x 2,5 kW
Hydr. Ejector stroke 250 mm
Upper hydraulic ejector 350 mm
Lower hydraulic ejector 450 mm

Pump drives 22 kW
Installed capacity of 34.5 kW
Operating pressure 140 bar
Oil tank capacity 240 dm ³
Weight of the machine without oil 5,000 kg
Dimensions (L x B x H) 1500 x 2500 x 3800 mm
2001
Price  
    request
125745084 209

AAGAARD CYCLOFILTER ADS 25/173 for sale
Cyclo filter


Number of sleeves: 96Length of sleeves: 3500 mmmotor : 37 Kwinlet : 600 mmCapacity 30 to 40.000 m3/h
used machine
 
Number of sleeves: 96
Length of sleeves: 3500 mm
motor : 37 Kw
inlet : 600 mm
Capacity 30 to 40.000 m3/h
1998
Price  
  BE   request
125823212 301

ENGEL 280/60 for sale
Injection molding machines for rubber


Injection unit: Screw diameter 20 mm Injection volume 280 cm3 spec. Injection pressure 2000 bar Clamping unit: Clamping force of 600 kN Ejection stroke 100 mm Mould installation height of 400 mm Plate distance ...
used machine
 
Injection unit:
Screw diameter 20 mm
Injection volume 280 cm3 spec.
Injection pressure 2000 bar

Clamping unit:
Clamping force of 600 kN
Ejection stroke 100 mm
Mould installation height of 400 mm
Plate distance of 850 mm
Clamping plates 620 x 560 mm

Optional extras:
2 x hydraulic core pulling
Interface for belt conveyor
9 x control zones for mould heating
3 x expansion cards TT081 with 8 x additional control posts
TFT color flat screen
Quality monitoring package QUALIPACK 1
Min. height increased by 100 mm

Drive:
Pump drive power 15 kW
Weight 5100 kg
Dimensions (L x W x H) standard machine 3900 x 3200 x 3200 mm
2000
Price  
    request
125745085 209

ARTMETAL ZAKKENFILTER for sale
Chip and dust extraction filter unit


75 sleeves, each with diameter 20 cm, length 1,50 m.Capacity approx. 8000 m3/hBuilt-on fan, motor 11 kW, inlet 300 mm.Air Return + fire damper6 x bag diam. 500 mm
used machine
 
75 sleeves, each with diameter 20 cm, length 1,50 m.
Capacity approx. 8000 m3/h
Built-on fan, motor 11 kW, inlet 300 mm.
Air Return + fire damper
6 x bag diam. 500 mm
1998
Price  
  BE   request
125823174 1102

MERCEDES OM364 for sale
Diesel engines


Well-functioning used Mercedes motor (diesel) type OM364 63 kW at 2300 RPM We have a large selection of new and used engines. Please contact us regarding pricing and availability.
used machine
 
Well-functioning used Mercedes motor (diesel) type OM364

63 kW at 2300 RPM

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
 
Price  
    request
125730690 107

HACO PM30150 for sale
Hydr. pressbrake


pressure: 150 tchamfer lenght: 3000 mmdistance between columns: - mmControl: FastBEND-2D MultiTouch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThis ad was created with MODUL ...
used machine
 
pressure: 150 t
chamfer lenght: 3000 mm
distance between columns: - mm
Control: FastBEND-2D MultiTouch
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m



This ad was created with MODUL MWS - the software solution of LogoTech.
2017
Price  
    request
125809056 401  

GALLON LINE - Ammonia,DEEP WELL EQUIPMENT, for sale
Filling equipment and sealing machines


Used Water treatment, bottling lines and auxiliary equipment. Details of the Machine Line are in the file Equipment list: • 5-Gallon line - 2010 • 5L line equipment – 2009-2010 • Am ...
used machine
 


Used Water treatment, bottling lines and auxiliary equipment.
Details of the Machine Line are in the file


Equipment list:

• 5-Gallon line - 2010
• 5L line equipment – 2009-2010
• Ammonia refrigeration – 2009
• Water tanks: 50m3 – 30m3 – TBD
• SIPA (Retail 0.5L-1.0L-1.5L line) – 2002
• WT & CIP equipment – TBD
• DEEP WELL EQUIPMENT – TBD




2010
Price  
  TR   request
125689675 102

WERA PROFILATOR DM320RTWin for sale
NC Lathe


Control: RSM 150 mit Schuster Auto Hexagon machiningOn request we can send you the divison tables.This ad was created with MODUL MWS - the software solution of LogoTech.
used machine
 
Control: RSM 150 mit Schuster Auto
Hexagon machining

On request we can send you the divison tables.



This ad was created with MODUL MWS - the software solution of LogoTech.
1984
Price  
    request
125794466 1102

MTU 16V4000 for sale
Engines


Dear's Sale, Complete engines MTU 16V4000M33F working condition Brgds info(at)kscege

Quantity: 2
 
Dear's

Sale, Complete engines MTU 16V4000M33F
working condition

Brgds
info(at)kscege
 
Price  
  TR   request
125689421 1900

Tipper Truck


Weight approx.: 1500 kgDimensions (l x w x h) approx.: 3600 x 2300 x 1400 mmDescription: Load capacity 6 m3

 
Weight approx.: 1500 kg
Dimensions (l x w x h) approx.: 3600 x 2300 x 1400 mm
Description: Load capacity 6 m3
 
used machinery auction RESALE 300 €  
  ES   request
<  page 6  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter