m3 used for sale

Dräger D-Vapor M35500-06 – Desflurane Vaporizer Manufacturer: Dräger Model: D-Vapor M35500-06 Part Number: M35500-06 Compatibility: Dräger anesthesia machines and others Missing item: Plastic top cover Condition: Very good pre-owned condition, sold as is as in the photos Auction-ID: A1-51275-16

Philips M3000A – Multiparameter Module (MMS) Manufacturer: Philips Model: M3000A Type: Multiparameter Measurement Server (MMS) for IntelliVue Monitors Measurements: ECG, HR, Respiration, NIBP, SpO₂, Temperature, Invasive Pressure Status: Good, Functional Auction-ID: A1-51275-163

Screws, eye bolts -Manufacturer: Golfaro, M30 C15 eyebolts -Grade: Steel, galvanized -Quantity: 109 eyebolts available -Price: per piece -Dimensions: 150/110/65 mm -Weight 1.7 kg/pc.

Electronic module, control card SIEMENS AMS-M340-ISI1 C8451-A43-A13-5 New ! Dimensions (package): 320 x 270 x 45 mm

Tap EMUGE M36 x 1.5 - 6HX Robust 2X - VA ( M36x1.5-6HXRobust2X-VA ) HSSE 20 / 1 0803001.0532 Dimensions: 180 x 50 x 50 mm

Cutting head ROLLER ́S CENTRAL M32 x 1.5 holder: Ø 64 mm Dimensions: 80 x 84 x 84 mm

Ring nut, eyebolt PAGUS M48 Grade: C15 Load capacity: 8600 kg (nut) ring inner diameter: ca Ø 85 mm with thread adapter M48 to M30 used, tested ! Dimensions: 230 x 165 x 110 mm

Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: thread M30 -Shaft: Ø 39.6 x 80 mm -Number: 9x bolts available -Price: per piece -Dimensions: Ø 60 x 125 mm -Weight: 1.3 kg/piece

Model: TSOL-M350 INPUT (DC) Recommended input power: 240 – 380 W MPPT voltage range: 32 – 48 V Operating voltage range: 16 – 60 V Maximum input voltage: 60 V Maximum Input Current: 10.5A Maximum input short-circuit current: 15 A OUTPUT (AC) Maximum continuous output power: 300 W Rated output current: 1.3A Maximum output current: 1.45 A Rated Output Voltage: L/N/PE 220/230/240V Rated frequency: 50 / 60 Hz Power factor: > 0.99 Harmonic distortion of current: < 3 % Maximum number of units per branch: 18 EFFICIENCY Peak inverter efficiency: 96.7 % CEC weighted efficiency: 96.5 % Nominal MPPT Efficiency: 99.9 % Nighttime consumption: < 50 mW MECHANICAL DATA Dimensions (W × H × D): 178 × 153 × 28 mm Weight: 1.98 kg Enclosure Type: IP67 Cooling: Natural Convection ENVIRONMENTAL DATA Ambient operating temperature: −40°C ~ +65°C Internal op ...

Model: TSOL-M350 INPUT (DC) Recommended input power: 240 – 380 W MPPT voltage range: 32 – 48 V Operating voltage range: 16 – 60 V Maximum input voltage: 60 V Maximum Input Current: 10.5A Maximum input short-circuit current: 15 A OUTPUT (AC) Maximum continuous output power: 300 W Rated output current: 1.3A Maximum output current: 1.45 A Rated Output Voltage: L/N/PE 220/230/240V Rated frequency: 50 / 60 Hz Power factor: > 0.99 Harmonic distortion of current: < 3 % Maximum number of units per branch: 18 EFFICIENCY Peak inverter efficiency: 96.7 % CEC weighted efficiency: 96.5 % Nominal MPPT Efficiency: 99.9 % Nighttime consumption: < 50 mW MECHANICAL DATA Dimensions (W × H × D): 178 × 153 × 28 mm Weight: 1.98 kg Enclosure Type: IP67 Cooling: Natural Convection ENVIRONMENTAL DATA Ambient operating temperature: −40°C ~ +65°C Internal op ...

Brand: Caterpillar (CAT) Type: M316C Mobile Excavator Serial no.: CATM316CKBDX00838 Engine: Fuel: Diesel Working parameters: Operating hours: 16,567 h Undercarriage: 4-wheel drive, rubber tyres Equipment: ROPS/FOPS cabin: Yes Air conditioning: Yes Front dozer blade: Yes Outriggers: Rear stabilizers Boom: Mono boom Stick: Standard stick Quick coupler: Hydraulic quick coupler Bucket: Digging bucket Additional hydraulics: Yes Automatic lubrication system: Yes (Lincoln) Tyres: Galaxy 10.00-20 NHS Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Approximate own mass: 16,500 kg. Auction-ID: A1-50932-31

Auction-ID: A1-49568-7

Viewing by appointment Auction-ID: A1-51065-14

Viewing by appointment Auction-ID: A1-51065-12

Signs of wear by age and mileage. The car is in neat condition, both optically and technically. Drives and shifts well. Auction-ID: A1-47423-2358

Mounted model with weighing system, spreading width 12-42 meters, edge spreading device, double spreading discs, lighting, tarpaulin, PTO driven, Isobus, section closure, concerns old model Auction-ID: A1-47396-21

The car starts, drives and brakes perfectly and has a valid technical inspection. All necessary on-board documents are present, as well as 2 keys - Equipment a.o. M Performance version Automatic air conditioning Panoramic glass sliding/tilting roof Beige leather interior Electrically adjustable front seats Heated front seats Harman Kardon audio system Large BMW navigation/multimedia screen ConnectedDrive Rear camera Front and rear parking sensors Automatic gearbox with paddle shifters Multifunction M sports steering wheel Cruise control / speed limiter Sport / Eco Pro riding modes Electric parking brake Power tailgate 19\" BMW M alloy wheels M Sport brakes with blue calipers Rear privacy glass LED Lights Electrically adjustable exterior mirrors State The car presents itself well cared for both inside and out and the leather interior is in beautiful condition. Ther ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

Kaeser M30 PE screw compressor on a trailer - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Kaeser M30 PE screw compressor on a trailer Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Kaeser M30 PE screw compressor on a trailer Price: 12250 EUR Download PDF Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12 Ask About T ...

MONTASTAMPI M30 die splitter was built in 2000 in Italy by ATTREZZERIA UNIVERSAL di Caramaschi Armando S.a.s. The machine is used to split and rotate stamping dies used in metal forming. It eliminates the need for manual handling, replacing traditional methods of spliting dies using cranes or other handling equipment. As a result, it is ideal for production facilities that use large-scale stamping tools. The MONTASTAMPI M30 enables the handling of large-sized and heavy stamping dies. The dies are attached to specially designed clamping systems, which ensure high stability during operation of the machine. The die rotation process is precisely controlled, which enhances ease of operation and ensures the safety of both the machine and the operator. The MONTASTAMPI die splitter weighs 6000 kg. Technical specifications of the MONTASTAMPI M30 die splitter - maximum load on the upper pla ...

Deburring machine manufactured in 2006. This Costa M36 CCS 1150 features a working width of 1150 mm, making it suitable for various deburring applications. If you are looking to get high-quality deburring capabilities, consider the Costa M36 CCS 1150 machine we have for sale. Contact us for further details.

New BEL M314Ai Laboratory Balance - 310g - 0.1mg New equipment in its original packaging Technical Parameters: Precision Balance Reference M314Ai Legibility: 0.1 mg (10-4 g) Maximum capacity: 310 g Repeatability: 0.1 mg Linearity: 0.3 mg Response time of less than 4 seconds Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.6 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm

This 3-axis GHIRINGHELLI M300SP610 CNC3A was manufactured in 1993. It features a grinding wheel diameter of 610 mm and a maximum wheel speed of 35 m/s. The machine is equipped with an automatic loading and unloading system, enhancing productivity. If you are looking to get high-quality centerless grinding capabilities, consider the GHIRINGHELLI M300SP610 CNC3A machine we have for sale. Contact us for further details.

This 3-axis ACCURL M37-63Tx2000 was manufactured in 2021. It features a maximum press force of 630 kN and a working length of 2000 mm, making it suitable for various bending applications. The machine has a rapid approach speed of 100 mm/s and a working speed of 8.0 mm/s. If you are looking to get high-quality bending capabilities, consider the ACCURL M37-63Tx2000 press brake we have for sale. Contact us for further details.

MULTICAR M31 Municipal implement carrier with the following attachments: - BUCHER Unix SC20u Wedge Vario snow plough with 200cm max clearing width - GMEINER Husky V13 silo spreader with control panel This Multicar M31 was first commissioned in 2021 and has only 860 total operating hours, 460 hydraulic hours, 11450km and comes from 1st owner. The vehicle is in a well-maintained overall condition, immediately ready for use, current RRP 150.000,-€. The sale is made as a used machine under exclusion of return, guarantee and warranty. - Net price €67,142 / Gross price €79,900 - Inspection / test drive possible! - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 16 406 mm unused Ovp -Type: M32 Black -2 carton: content 5 pads per carton -Price: complete -Weight: 3.2 kg

Quick Snap brush segment, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 17 432 mm unused original packaging -Type: M32 Black -Carton: Contents 5 pads -Price: complete -Weight: 1.9 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Screws, hexagon screws, flange nuts, hex nuts, collar nuts -Hex nuts: M8 to M30 645 kg -Sizes/Quantity: see photo parts list Price: complete Total weight: 645 kg

Liebert Emerson M31UA Cooling System Perimeter Cooling for Data Center Environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Datasheet under this link Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, adapter -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm -Receiving thread: M33 -Quantity: 2x adapters available -Price: per piece. -Dimensions: Ø 40 x 100 mm -Weight: 0.8 kg/pc.

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

Measuring amplifier, power supply module, measuring amplifier point design -Manufacturer: Keyence, Measuring amplifier point version -Type: SJ-M300 -Dimensions: 130/50/H75 mm -Weight: 0.2 kg

Mak M32 Connecting rods Free of cracks and ovality With good measurements 7 pcs available

CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Make: 1990 Control: FANUC O-M Travels: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 – 325 mm Distance between spindle nose and pallet table (Z-axis) 125 – 620 mm Rapid traverse movement: 24 m/min Feed movement up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed Actuators FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main spindle revolutions: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet Indexing Angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Clamping force of the pallet: 3,400 kg Max. workpiece weight: 150 kg Automatic Tool Changer: Number of Tools 30 Tool change 2.5 sec. Collets Clamping Time 7 sec. Tool diameter max.: 110 mm Too ...

Measuring amplifier, power supply module, point-type measuring amplifier, ionizer, static eliminator, static eliminator -Manufacturer: Keyence, Static Eliminator Stabilizer -Type: SJ-M300 -Dimensions: 130/70/H35 mm -Weight: 0.1 kg

We sell 100 x Igel UD3-LX M350c 4/8 GB OS11 Processors: AMD Ryzen Embedded R1505G 2.40GHz 8GB DDR4 AMD Radeon Vega 3 Graphics eMMC: 8GB In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies.  ...

thread dia.: M6 - M30 mm : 58 - 205 U/min. working area: 320 - 1500 mm engine output: 0,85 kW weight: 36 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Citizen Model: M32 V Year of Manufacture: 2003 Mass: 3200 kg The machine comes with an automatic bar feeder and oil mist filter. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

Manufacturer: ABB 560 kw Motors — Vaasa, Finland Model: M3BP 315S K4 A V3 Serial No.: TE262741-1 Production Code: 308P315S0-BUQWH-3641B CE Compliant Voltage 690 V Current 575 A Frequency 50 Hz Speed 1491 rpm Power Output 560 kW Power Factor (cos φ) 0.86 Efficiency (η) 94.1 % Duty Type S1 (continuous) Insulation Class F Enclosure Protection IP55 Mounting Type V3 (vertical mounting, flange) Bearing Type 6322/C3 (DE) & 6316/C3 (NDE) Regreasing Interval Depends on load: 4,200–10,500 hours Weight ≈ 2600 kg (typical for this model) Manufacturing Standard IEC 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Manufacturer: ABB 560 kw Motors — Vaasa, Finland Model: M3BP 315S K4 A V3 Serial No.: TE262741-1 Production Code: 308P315S0-BUQWH-3641B CE Compliant Voltage 690 V Current 575A Frequency 50 Hz Speed 1491 rpm Power Output 560 kW Power Factor (cos φ) 0.86 Efficiency (η) 94.1 % Duty Type S1 (continuous) Insulation Class F Enclosure Protection IP55 Mounting Type V3 (vertical mounting, flange) Bearing Type 6322/C3 (DE) & 6316/C3 (NDE) Regreasing Interval Depends on load: 4,200–10,500 hours Weight ≈ 2600 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.  

Manufacturer: Agfa Model: Anapurna M3200i RTR Year of Manufacture: 2016 Machine type: UV inkjet printer Condition: used Colors: 6C- Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta Konica Minolta 1024i printheads Operating hours of UV lamps approx. 590h Total operating hours estimated: approx. 2500h Printing method: UV printing, roll to roll Print width: up to 3200 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details.