maximum number of results exceeded > 1000
please refine your search
5-AXES CNC WORKING CENTER - CMS AVANT 1B/560-PX5 year of manufacturing 2006 CE standard No. 5 axes controlled axes strokes: X=5600mm Y=2350mm Z=720mm B=+/-120° C=+/-270° working area 5220x1520 mm PX5 5-axes unit - HSK63f collect - power 12 kw (16,3 hp) - liquid cooled - max rotation 24000 rpm - pneumatic brakes on B and C axes No. 3 tool changer disks on Y carriage with No. 16 positions each (No. 48 total positions) vertical and horizontal drilling unit with 7+2+2 pences working table with No. 8 Schmalz clamps/cups support - No. 8+2 frontal/lateral reference stops - No. 8 bars for pieces lifting motorized belt for chips extraction No. 12 suction cups 145x35x150h mm - No. 12 suct ...
Make Aerzener, Type GMA 12.4, No 242975, New 1982, Blower (1x), Capacity 8,65 M3/Min, Pressure build up 1,0 bar, Motor 15,0 KW, 380 Volt, With air filter , Mounted on frame , Floorspace 1,5x0,7 M, Total height 1,1 MBLOWERSBLOWERS > BLOWERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!
Weight approx.: 1120 kg modelname / number: L45-7.5 year of manufacture: 2003 operating pressure: 7,5 bar Dimensions (l x w x h) approx.: 1900 x 1300 x 1700 mm Description: - Identification number 349022/1307 - air compression medium - flow rate 7.84 m3 / min - voltage 400 V - pressure 7.5 bar - installed motor power 45 kW - speed 3000 rpm - outlet pressure 1.0 bar - flow rate 6,000 liters per minute
NEW SCREW COMPRESOR RENNER RSF 18,5 with inbuilt inverter Technical data: capacity: 2,62m3/min;(2620L/min) engine: 18,5KW; pressure max. 10 bar; year 2006 working hours 12213h
Weight approx.: 600 kg Dimensions (l x w x h) approx.: 1900 x 1100 x 1050 mm Description: - Serial number 93M37E71006 - voltage 380 - 415 V - maximum operating pressure 10 bar - discharge pressure 10.5 ba - capacity 5.2 m3 / min - input shaft power 44.5 kW - control voltage 48 V - AC - flow 5200 liters per minute - working hours 32094h
Screw compressor KAESER CSD 82 SFC Compressor with inverter Technical data: capacity: 8,26 m3/min (8260L/min); engine: 45 KW; pressure: 8 bar; year: 2007 working hours: 10605h
Weight approx.: 600 kg modelname / number: SSR MH 37 year of manufacture: 1987 operating pressure: 10 bar Dimensions (l x w x h) approx.: 1900 x 1100 x 1050 mm Description: - Serial number 38768032 M37 - voltage 380 - 415 V - maximum permissible working pressure 10 bar - discharge pressure 9.8 bar - input shaft power 43.5 kW - control voltage 48 V AC - flow rate 5200 liters per minute - working hours 27512h
Screw compressor KAESER CS121 Screw exchange - 2014 Compressor after service Technical data: Capacity: 12,00 m3/min (12000L/min); engine: 75 KW; pressure: 8 bar; year: 2000 working hours: 14745h
Weight approx.: 1200 kg modelname / number: RA 086 year of manufacture: 1995 operating pressure: 7,3 bar Dimensions (l x w x h) approx.: 2000 x 1200 x 1700 mm Description: - Identification number 349008 / 299P - air compression medium - flow rate 7.84 m3 / min - voltage 400 V - pressure 7.3 bar - installed motor power 46 kW - speed 3000 rpm - outlet pressure 1.0 bar - flow rate 7300 liters per minute
Model: Decanter Material: Stainless steel Driving force: 15 kW Max. bowl speed: 3250 1/min Inner diameter drum: 190/353 mm Permissible sediment density: 3,4 kg/dm3 Dimensions: L 2800 x W 800 x H 1200 mm Condition: Used Technical documentation: In German Accessories: Control, Netzsch NE 50B feed pump Message: The product touching parts are made of stainless steel. The centrifuge is dismantled and available immediately
Type Delta Blower GM 4S, No 849591, New 2005, Blower (1x) make Aerzener Maschinenfabrik GmbH, Capacity 5,0 m3/Min, Pressure build up 1 bar, Motor 7,5 KW, 400/690 Volt, Floorspace 1,9x1,0 M, Total height 1,3 M, Weight 550 KGBLOWERSBLOWERS > BLOWERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!
Screw compressor KAESER CS91 Compressor after service Technical Data: capacity: 9,10 m3/min (9100L/min); engine: 55 KW; pressure: 7,5 bar; year: 2000 Working hours 13162 h
Mercury Auctions is taking care of the sale of the warehouses and numerous equipment of the Enel Thermoelectric Power Station in Genoa, next April 16 at the headquarters in Genoa in Via All'ex Idroscalo. The visions of the goods are organized on Tuesday 12, 19, 26 March and on 2 and 9 April, from 9 to 12 and from 13 to 15, by appointment only. Year 1989 Cv: 122 Max. capacity: 9,320 kg Max. load height: 4,6 mt Bucket capacity: 1,7 m3 Weight: 9660 kg 2,900 hours of work Many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
Cryovac OldRivers Furukawa Type: FVV12-220SB Efficiency: 10-45 bags/minute Bags dimensions: width: 80-220 mm/length: 150 mm x 300 mm Water consumption: 3 l/min Vacuum pump 630 m3/h
Dewatering Station with Membrane Filter Press for Kieselguhr Sludge This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is suitable also for dewatering other type of sludges. Actual dewatering is made with Latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content Filter press is equipped with an automatic cloth washing system and an automatic cake discharge. Shaker bars for discharge and plate opening and closing functions are hydraulically operated (Limburg Cake Release Control System). Cloth washing i ...
type: I140/1F System 1R y.o.m.: 1990 heating power: 140 kW heating elements material: graphite max. working temperature: 1150°C working space(w x l x h): 600 x 900 x 600 mm max. charge weight: 600 kg gross max. coolig gas pressure: 0,9 bar (abs.) vakuum system: backing pump- 160 m3/h Roots pump - 1000 m3/h pressure range: 10 E-3 to 1000 mbar
type: I140 y.o.m.: 1996 heating power: 140 kW heating elements material: graphite max. working temperature: 1350°C working space(w x l x h): 600 x 900 x 600 mm max. charge weight: 600 kg gross max. coolig gas pressure: 6 bar (abs.) vakuum system: backing pump- 280 m3/h Roots pump - 1000 m3/h diffusion pump - 8000 l/s pressure range: 10 E-6 to 1000 mbar
Bottle Washing Machine KHS Innoclean EE52/87 S22N, 70 000 bph Single end bottle washing machine by KHS Innoclean, manufactured in year 2000 with two pre-cleaning section, two caustic zones and three fresh water rinsing zones. Nominal capacity is 70 000 bph and this machine used for 0.5 liter of glass bottles, but also it can be used for 0.33 liter bottles. The machine is stopped in year 2015 and in 2016 of November will be dismantled and packed. The equipment is in good condition and ready to delivery. Manufacturer: KHS Manufacturer type: Innoclean EE52/87 S22N Year of manufacturing: 2000 Capacity: 70 000 bph Total operating hours: 95 000 Control PLC: Siemens Simatic S7 Gen ...
Year built: 2014 - 2016 Material: Regular steel Driving force: 22 kW Max. operating temperature: 20 °C Dimensions: L 3600 mm x W 400 mm x H 500 mm Empty weight: Approx. 600 kg Speed: 77 - 374 1/min Flow rate: 6 - 60 m3/h Operating pressure: 10 - 8 bar Operating voltage: 380-420/660-725 V Type of protection: IP 55 Condition: Used Technical documentation: In German Message: There are a total of 3 identical pumps available in our warehouse
Year built: 2014 - 2016 Carda-IdNr: P-0980 Material: Regular steel Driving force: 22 kW Max. operating temperature: 20 °C Dimensions: L 3600 mm x W 400 mm x H 500 mm Empty weight: Approx. 600 Kg Speed: 91 - 357 1/min Flow rate: 4 -34 m3/h Operating pressure: 16 - 10 bar Operating voltage: 380-420/660-725 V Type of protection: IP 55 Condition: Used Technical documentation: In German Message: A total of 3 identical pumps are available in our warehouse
Engel 110 tons tie-bar-less IMM. This machine has new Screw and barrel. Machine will be delivered complete checked and tested Technical details INJECTION VOLUMEN 154 cm3 WORKING HOURS 65.725 TRAVEL OPENING 500 mm INJECTION PRESSURE 1.600 bar MIN. MOULD HIGHT 250 mm PLATEN SIZE 730 x 600 mm SCREW DIAMETER 35 mm YEAR OF BUILDING 2000 CLAMPING FORCE 1.100 kN
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 400 mm YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 900 mm SCREW DIAMETER 55 mm PLATEN SIZE 1.100 x 1.000 mm CLAMPING FORCE 3.000 kN
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side. Technical details WORKING HOURS 45.855 INJECTION VOLUMEN 154 cm3 INJECTION PRESSURE 1.581/2.190 bar YEAR OF BUILDING 2003 SCREW DIAMETER 35 mm TRAVEL OPENING 457 mm PLATEN SIZE 670 x 600 mm CLAMPING FORCE 800 kN
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuc ...
Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE ...
Year 12/2000 Install in 2001 Max Web width: 48” (1219,2 mm) Impression cylinder circumference: 69” (1752,6 mm) Product size: 219 x 304,8 mm 21 million impressions Equipped : 2 MEG auto-pastes Two Web guide unit with double Timson indeed unit. 2 Units blanket to blanket print units Timpson brush dampening system Technotrans cooling devices 1 Folder Type M3C/4-2D Stitching system streamliner 2000 Ink agitators Ink remote control system with console Grafikontrol system Plate bender Stacker Gämmerler KL 250 delivery From 21 grams TO 120 grams paper The press is like new
BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:4 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Gr ...
Refrigeration Screw Compressor DuoPack SAB 128 HF - 750 kW This is a chiller package made by Sabroe Denmark in 2002, cooling capacity 750 kW, adjustable for 10-100% load. The package consist of two separate liquid cooling screw compressors type SAB 128 HF (DuoPack) with their own electric motor, both operating with R22 refrigerant. Units are built on a common base frame with an integrated horizontally mounted common oil separator, oil circulation pump, oil filter, suction- discharge- and safety valves. Unit has local control unit Unisab III system. Unit was dismantled in year 2014 and is ready for immediate shipment Lubrication oil of the refrigeration compressor is fed to the compress ...
Yeast Tanks 8 x 7.6 m3, Scandi Brew Yeast tank farm with 8 insulated stainless steel tanks with agitators and heating & cooling circuits for temperature control. Each tank has electric motor driven agitator for mixing. Tanks comes with valve banks, control cabinet and service platforms as shown in pictures. Manufacturer: Scandi Brew, Denmark Made in year: 1998 Number of tanks: 8 Gross volume of each tank: 7627 liters Operating pressure: - 1 / 2.2 bar Operating temperature max. 120 °C Material: Stainless steel 1.4301 Cooling and heating media: Glycol Tanks are equipped with Electric motor driven agitator One heating and one cooling circuit Insulation with stainless steel clad ...