m 91 used for sale

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.

Machine Details Warehouse number 1105-03531 Machine Type Machining Center - Vertical Make DMG DECKEL-MAHO Type DMC 64 V linear Year of construction 2002 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 640 mm y-travel 600 mm z-travel 500 mm Table size 850 x 600 mm Spindle holder ISO 40 Speed range 0 - 12000 rpm Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 30 Information CNC control heidenhain tnc 530 30X SK 40 MAGAZINE ELECTRONIC HANDWHEEL MACHINE IN GOOD CONDITION WITH SPAENEFOERDERER

Shared oven Quail Mini Piccolo 4 Floor oven Quail Mini Piccolo 4 electric with 4 floors each 60x40cm with steam function for each floor separately. The oven is immediately available for sale in the warehouse with fermentation chamber and exhaust air hood including vapour condenser. Inspection of test baking and delivery possible. - 4 floors for 4x sheets 60x40cm - with guest cabinet - with hood incl. capacitor - DMS 3 Master Timer control - Upper and lower heat separately adjustable - Power: 16.5 kW - 400V / AC /3Ph / N / PE / 50 Hz -Floor entrance height 14cm -Year of construction 08 / 2007 Dimensions: Height: approx. 210 cm Width: approx. 98 cm Depth: approx. 100 cm

aschinella details Warehouse number 1105-03533 Machine Type Machining Center - Vertical Make MAZAK Type VTC 20 B Year of construction 1996 Control type CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Price Technical details x-travel 1120 mm y-travel 510 mm z-travel 510 mm Tool changer 30 compartment Information Control Mazatrol M PLUS 1X 24 COMPARTMENT TOOL CHANGER SPAERNEFOEDERER With CNC control Mazatrol MPLUS , 24-fold tool changer, With CNC control Mazatrol M PLUS , ATC for 24 tools Technical data / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm Table size 1460x510 mm table load / max. workpiece weight 800 kg Tool shaft / spindle taper SK40 Speed range infinitely variable / spindle speed stepless 40-10000 rpm Number of tool places in ATC ...

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading

Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN

TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4x head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training always regularly maintained

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...

MAX. OUTER TUBE DIA. 85 MM

Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Chain-type tool magazine 60 pocketsTool magazine with 60 positions, chain type with double gripper (differently from standard)Pneumatic set up station for tool loadingPneumatic set up station  ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

; Gross weight [kg]: 2450; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200

Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.

Takeuchi TB 230 Year of construction 2017 Operating hours 980 Powertilt with load hook and hydraulic Lehnhoff HS03 quick coupler 1 digging bucket 300 mm

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

May SS80 U Machine can be visited by arrangement under power

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

Spiral Kneader Model: SM 60 Kneading machine with robust technology! Digital easy Touch Control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 2 - 40 kg dough Flour dust hood Stainless steel boiler with 60 liters Machine mobile with 2 locks with EMERGENCY circuit DGUV V3 tested Connection 400V, 2.4 kW, 16A-CEE plug Dimensions: 600 x 980 x 1090 mm, WxDxH NEW Machine With 24 months warranty Come in our bakery machines sale!

Spiral Kneader Model: SM 85 Kneading machine with robust technology! Digital easy control with dough temperature display Dough machine with 2 timers Boiler lighting for min/max. 4 - 60 kg dough Flour dust hood Stainless steel boiler with 85 liters with EMERGENCY circuit Machine mobile with 2 locks DGUV V3 tested Connection 400V, 3.5 kW, 16A-CEE plug Dimensions: 620 x 1030 x 1180 mm, WxDxH NEW Machine With 24 months warranty More bakery machines can be found in our large warehouse!

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0344 Brand: SCM MINIMAX Model: FS 41/C - CE Standard 3 Works combined machine (Surface/ Thickness/Mortiser)) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Technical data: Planer shaft with n° 3 Tersa” knives Working width 410 mm Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Wheels for moving the machine Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.

Multivac MR 335 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons, 2 label dispenser model SUPER MR4000, label passage width max. 50 mm, label reel maximum diameter 360 mm, reel core diameter 76 mm, labelling speed up to 1.2 m/s, width of through conveyor 190 mm, speed of conveyor from 0.35 to 1.08 m/s, infeed/outfeed height approx. 820-920 mm, machine on wheels, electrical connection 230V/50Hz, 16A, maximum load 2.5 kW, compressed air 6 bar, machine floor space approx. 2738 x 1210 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 700 kg

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Make PB&E Model Meteor Year 1980 Size of the plate 420 x 510 mm Foil transport both longitudinally and transversely Condition machine is currently being refurbished Details automatic foil transport (adjustable foil pull) adjustable dwelling time, adjustable embossing time

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.