m 3080 used for sale

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

Kolbe MWE32 Mixed Meat Grinder completely made of stainless steel, screw, screw housing and union nut made of special alloy smooth running Wheeled on wheels Machine should be thoroughly cleaned before use Video about test run available

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25 kW -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Number: 2x motor available -Price: per piece -Dimensions: 240/123/H155mm -Weight: 6 kg/pc.

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Rexroth, 3-phase permanent magnet motor -Type: MKD041B-144-KPO-KN -Speed: 7500 rpm -Shaft: Ø 14 x 30 mm -Dimensions: 275/83/H112 mm -Weight: 4.6 kg

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

Tool holder, milling holder, milling tool, clip-on holder -Manufacturer: Loewe, milling chucks, MK5 mount -Type: 1/T ECMO -Size: 5 x 32 x 75 -Dimensions: Ø 60 x 276 mm -Weight: 3 kg

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter, reducing sleeve -Morse Taper Sleeve: Taper reducing sleeve -Intake: MK6 -Recording tool: MK5 -Number: 3x recordings available -Price per piece -Dimensions.: Ø 63.5 x 218 mm -Weight: 2.5 kg/pc.

Safety relay, safety controller, emergency stop switching device, switching device, safety sensor, safety switching device, expansion module -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ mi1p -Number: 2x module available -Price per piece -Dimension: 100/20/H130 mm -Weight: 0.1 kg/pc.

Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Used packaging machine MC2 DT with transporter MCA4 DB. 3 pieces available. New 2011-2013. Technical data: Type of machine - wrapping machine (double twist) Operation - electromechanical, Mains supply - 230/400 B 3 phases + U Frequency - 50 Hz Operating pressure - 6 bar Flow rate - 0.5 Nl/min Weight - 1700 kg

x-travel: 530 mm y-travel: 600 mm z-travel: 300 mm 0: 7 bar Air consumption: 70-90 Nl/min. voltage: 120/230V+-5% kVA total power requirement: 1,5 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Electric motor, three-phase motor -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm -Weight: 18 kg

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

Merkle Slitter 500mm wide

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: MDrive 23, Stepping Motor Stepper Motor -Type MDM1PSD23C7 -Shaft: Ø 6 x 18 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 120/58/H75 mm -Weight: 1.2 kg/piece

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Manufacturer: Moog, control card from Battenfeld injection molding machine -Type: D121-014-A004 -Total dimensions: 270/115/H60 mm -Weight: 1.1 kg

Mounting plate, mounting module -Manufacturer: murrelektronik, mounting plate type MP 6 S with components -Art.No: 62030 -Dimensions: 90/60/H45 mm -Weight: 0.1 kg

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: 1375 fully assembled threaded rods -Type: M10 x 250 SW 7 -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H300 mm -Weight: 235 kg

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1 TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg

Vertical lathe MORANDO 3000 for sale Technical data: X axis: 1500 mm Axial travel: 1200 mm Turning diameter: 3100 mm Maximum turning height: 1840 mm Platform diameter: 3000 mm Maximum table load: 47000 kg Spindle power: 52 KW Number of spindle revolutions/minute: 100 rpm CNC: Siemens 840D

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp