66 offers

Category: 102: lathes
New in: 1989
Price: 12.500 €
Location: Land-de DE Grevenbröich
Seller: HWM Werkzeugmaschinen GmbH

Type of machine: BOMAT 35 CNC Macschinen No.: control: HEIDENHAIN TNC 355 x travel: 1200 mm y travel: 800 mm z stroke: 600 mm Table size: 1400 mm x 800 mm Table load: 700 kg Spindle speeds 30-6000 RPM Total power kW 11/15 Speed x / y / z: 6000 mm / min Rapid traverse x / y: 10000 mm / min Rapid z: 12000 mm / min Spindle taper: BT 40 Spindle bearing diameter: 65 mm Tool magazine of pos. : 30-fold Tool diameter max. 110 mm Tool length 350 mm Tool weight of 7 kg The weight of the machine ca. 8 t Space requirement approx. 3080 x 2700 x 3074 m

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Conical granulating sieve, Make 030805.1K330BG, New 2000, Material stainless steel, Rotor sizes 280mm, Sieve sizes Dia. 300mm x250mm, Sieve perforation 0,8mm, 10mm, 4mm, Inlet 175x260mm, Outlet dia. 520mm, Motor 7,5kW, With extra sieves, Mounted on stainl. st. frame, Floor space 1,2x0,6m, Total height 0,8m, Weight 260kgSIEVE GRANULATORSSIEVES > SIEVE GRANULATORS

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-it IT 10093 COLLEGNO (TO), VIA EDMONDO DE AMICIS, 146
Seller: B.M. MACCHINE UTENSILI srl

TYPE CNC FANUC 18 M CROSS TRAVEL 1020 mm AXIS X 610 mm 560 mm VERTICAL TRAVEL TABLE SIZE 550 x 1050 mm PALLET NUMBER 2 40 TAPER SPINDLE MOTOR POWER 15 kW 10,000 rpm SPINDLE SPEED RANGE TOOL MAGAZINE NUMBER 40 POWER 45 kVA WEIGHT 12,000 Kg DIMENSIONS 2660 x 4670 x 3080 mm YEAR of CONSTRUCTION 2001 Through-spindle coolant NOTES to 20 bar

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Continuous reactor Inline-dispersing installation (1x), Make Ystral, Type Z-66, No 213230804, New 2004, Vessels make Jagri were built in 1978, Material stainless steel (1.4571), Motor 2,0 KW, 290/500 Volt (Ex), With vessel (3x of which 1 is equipped with stirrer), Capacity 1x 40 Ltr en 1x 21 Ltr, With jacket, Working pressure 3 bar, Mounted on frame (stainless steel), With switch, Floorspace 1,8x1,2 M, Total height 2,0 M, Weight 525 KGCONTINUOUS REACTORSMIXERS > CONTINUOUS REACTORS

Category: 301: injection moulding machines
New in: 1999
Price: 8.500 €
Location: Land-de DE 32423 Minden, Hansastr. 27
Seller: WAGO Kontakttechnik GmbH & Co. KG

Second-hand machine BJ. 1999 (Inv. 3080) Hours of operation: 69236,4 Machine cycles: 4505643 Control: NC 4 Performance data: 80 T Screw diameter: 30 mm L/D ratio: 20 Suitable for the processing of: PA spec. Injection pressure: 1460 bar Maximum shot weight: 98 g power supply: 50 Hz 400 V 83A Performance: 59kW Heating power: 7, 50kW Machine size approx. (Lxwxh): 3.88 m x 1.4 m x 1.83 m

Category: 103: milling machines
New in: 1992
Price: request quote
Location: Willich
Seller: Markus Hirsch GmbH

x-travel: 6000 mm y-travel: 1200 mm z-travel: 1300 mm Control: Heidenhain turning speeds: 20-2000 U/min transmission ratio: 2 rapid traverse: 10 m/min feed: 4 m/min universal milling head swivelling: CNC spindle taper ISO: 50 control: Heidenhain type: TNC 415 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m

Category: 301: injection moulding machines
New in: 1995
Price: request quote
Location: Land-de DE
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Arburg Model: 370M 800-225 Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1995 Production hours: 53562 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 4300 mm Measurements depth: 1600 mm Measurements height: 1850 mm Machine weight: 3080 kg CONTOL UNIT: Brand: Arburg Model: Multronica CNC main language: German INJECTION UNIT: Stroke volume: 106 cm³ Injection pressure: 2350 bar Screw diameter: 40 mm CLAMPING UNIT: Clamping force: 800 kN Opening stroke: 500 mm Ejector stroke: 175 mm MEDIA: Main electronic connection: 400 V Power con ...

Category: 201: saws
New in: 2006
Price: request quote
Location: Land-pt PT Portugal, 3730-068 Vale de Cambra
Seller: Surplex GmbH

Weight approx.: 760 kg Dimensions (l x w x h) approx.: 3300 x 3200 x 1370 mm Description: Serial number MC00083022, Sliding table length 285 x 3000 mm, Saw blade diameter 300 mm, Saw blade interior diameter 30 mm, 3 speeds: 3200 / 4000 / 6000 Rpm, Scoring unit blade saw diameter 125 mm, Scoring unit blade saw interior diameter 20 mm, Maximum cutting length 3080 mm, Total power installed 6,05 kW, Main blade saw tiltable 45º, Raising and tilting the saw blade is manual by a handwheel, For further information see photos.

Category: 503: shredders
New in: 2011
Price: request quote
Location: Land-de DE
Seller: RDA Recycling Machinery GmbH

Manufacturer Doppstadt Calbe GmbH Type DF 307 F Rotaro Year of construction 2011 Motor 2 x 160 kW Rotor length 3080 mm Rotor diameter 600 mm Circle Number of rotor knives 56 Machine dimension Transport dimension Weight 22.800 kg In need of repair

Category: 207: gluespreader machines
New in: 2004
Price: 38.500 €
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: Homag\r\nType: KAL310/7/A20/S2\r\nYear: 2004\r\n\r\nEquipment\r\n- Motoric height adjustable top pressure with joined v-belt\r\n- HOMATIC-control with enter unit NC2\r\n- Hot melt gluing unit A20 for coil ware up to 3 mm and strip ware bis 20 mm\r\n- Noise protection unit part\r\n- End trimming unit chamfer/straight\r\n- Empty space for further units\r\n\r\nTechnical data:\r\n- Feed stepless adjustable 18-24 m/min\r\n- Working height 950 mm\r\n- Working width minimal: 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- Workpiece overhang 30 mm\r\n- Workpiece thickness 12 - 60 mm\r\n\r\n-  ...

Category: 503: shredders
New in: 2011
Price: request quote
Location: Land-de DE
Seller: RDA Recycling Machinery GmbH

Manufacturer Doppstadt Calbe GmbH Type DF 307 F Rotaro Year of construction 2011 Motor 2 x 160 kW Rotor length 3080 mm Rotor diameter 600 mm Circle 339 min 1 Number of rotor knives 56 Machine dimension Transport dimension Weight 22.800 kg In need of repair

Category: 202: milling machines
New in: 1998
Price: 12.950 €
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

NC processing centre\r\nBrand: Biesse\r\nType: Rover 322\r\nYear: 1998\r\n\r\nTechnical data:\r\nWorking area X 2700\r\nWorking area Y 1144\r\nWorking area Z 114\r\n\r\nNumber of milling spindles 2\r\nMain motor kW 7.5\r\nTool changing places 10\r\n\r\nDrilling spindles vertical 26\r\nDrilling spindles horizontal X 6\r\nDrilling spindles horizontal Y 2\r\n\r\nGroove saw 90° swivable\r\nTool clamping system ISO 30\r\nNumber of consoles 6\r\nCapacity vacuum pump m³/h 100\r\nFeed max m/min 75\r\nWeight ca. kg 3000\r\nCE-sign\r\n\r\n\r\nNote:\r\nThe specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.\r\n\r\n

Category: 107: sheet metal working
New in: used
Price: 6.248 €
Location: Land-pl PL
Seller: MASZYNERIA SP. Z O.O.

Guillotine shears ZAMECH NG 13. Technical data : - the largest thickness of cut sheet: 13 mm - the largest length of cut sheet: 3080 mm - length of knives: 3250 mm - spacing of side walls: 3200 mm - power demand: 21.5 kW - number of knife strokes per minute: 12 - flywheel diameter: 1100 mm - number of revolutions of the flywheel per minute: 500 - overhang: 600 mm - stand extension: 600 mm - dimensions of the machine (width x length x height): 3300 x 4300 x 3050 mm - scissors weight: 15500 kg - DTR - technical and operational documentation

Category: 205: boring mills, machining centers
New in: 2001
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Category: 106: presses
New in: 2008
Price: request quote
Location: Land-cz Czech Republic, 60200 Brno
Seller: AMARON s.r.o.

Max. workpiece diameter: 1250 mm Max. distance between mounting surfaces of lower and upper die: 900 mm Max. stroke of upper approx.: 600 Hardening capacity of machine per hour approx.: 1200 kg/h Workpiece height: 250 mm Clamping force: Centering pin: 80 KN Clamping ring: 210 KN Dimensions of the machine without accessories: 4250x3250x3700 mm Machine weight without accessories: 14.000 kg Accessories: Electric oven with controlled atmosphere: REALISTIC CAE 13.15.8 / 10 Workspace: 1300x1400x800 mm Working temperature: 950 ° C Power input: 78 KW Dimensions of furnace: 3080x2840x2050 mm Furnace weight: 8600 kg Ventilator Flame curtain Oxygen probe ECOSOND ...

Category: 208: lacquer machines
New in: 2005
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Digicoater , Type: 3080, Year: 2005, Control: Siemens C 7, Work piece width min-max mm: 400 - 3.000, Min.-max. workpiece length in mm: 8.000, Min.-max. workpiece height in mm: 100, Spraying heads - total: 4, work piece detection: yes, Spraying stations: 4, Feeding speed m/min: 1,2 - 4,8, Electrical power consumption kW: 6,4, Required space L x W x H mm: 12.000 x 5.000 x 1.600, Year :2005

Category: 1007: drilling machinery
New in: 2011
Price: 111.700 €
Location: Land-pl PL 33-112 Tarnów
Seller: SWENSKA POWERHOUSE Marcin Piotr Rejch

ENG For sale DRILLTO ZT-25 CDF . Description in English below. PL Do sprzeda?y DRILLTO ZT-25 CDF . Zapraszamy tak?e klientów z zagranicy. This machine is ready to work straight after purchase. Company did care about this machine, that's why it will serve well a few nice years without causing problems. - We can arrange transport of this machine to Your yard, at a very reasonable price because we have specialized semi-trailers. - Location: Poland [post code] 33-112 , [city] Tarnów. We invite you with a mechanic. There is nothing to hide. A service or an expert can be sent to the inspection. - NET PRICE: 111 244 euro - Year of production: 2011 - Mileage: 717 mh - More in ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 1991
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hackemack, Type: KTR 3080, Year: 1991, Control: Hymmen, Work piece width min-max mm: 400-1300, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 10-50, Vacuum feeding: yes, Longitudinal feeding: yes, Stacking pattern, double-row: yes, Number of stacks: 4, Stack height in mm: ca.1500, Cycles approx.: 15, Number of sucking lines: 4, Removal of protective boards: yes, Feeding speed max m/min: 30, Feeding speed continous adjustable: yes, Erection in a pit: yes, Auslaufrollengang: yes, FREE TEXT: 2 Einführrollenbahnen länge 3300 mm, Year :1991

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-sk SK Czech Republic
Seller: Fermat

Vertical machining centre Producer : KOVOSVIT MAS Model : MCV 1000 CNC YOM : 2001 Number of driven axes : 3 Travel X-axis : 1016 mm Travel Y-axis : 610 mm Travel Z-axis : 660 mm Clamping area of table : 1300 x 600 mm Control system : Heidenhain TNC 426 Spindle speed : 0-7500/min Spindle taper : ISO 40 ATC : 20 Machine dimensions l x w x h : 2700 x 3080 x 2940 mm Machine weight : 5500 kg

Category: 1900: general inventory
New in: used
Price: request quote
Location: Land-ch CH Switzerland, 230 La Chaux-de-Fonds
Seller: Surplex GmbH

Weight approx.: 2 kg Dimensions (l x w x h) approx.: 426 x 200 x 200 mm Description: Including various accessories

Category: 102: lathes
New in: 1995
Price: request quote
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Harrison Model: Alpha 550 CNC Lathe Year: 1995 Condition: Used Machine type: Lathe Location of machine: UK Machine Details MODEL ALPHA 550 YEAR 1995 CONTROL FANUC SPINDLE SPEED 12-1800 RPM SWING OVER THE BED 550 mm DIAMETER SWING OVER THE SADDLE 370mm DIAMETER SWING IN THE GAP 830mm DIAMETER DISTANCE BETWEEN CENTRES 200mm SPINDLE BORE 90mm DIAMETER MAIN MOTOR 11 kw (15HP) DIMENSIONS 1611 mm x 1720 mm MACHINE WEIGHT 3080 KGS PLUS 3 JAW CHUCKS FACE PLATE SAFETY CHUCK GUARD QUICK CHANGE TOOL POST PLUS HOLDERS 2 X 3 POINT STEADY GAP BED MACHINE MANUALS  ...

Category: 207: gluespreader machines
New in: 1997
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: IMA \r\nType: COMPACT/PC/F/DV/6220\r\nYear: 1997\r\nLeft hand version\r\n\r\nWith liftback-return for the single-man-operation\r\n\r\nTechnical data:\r\n\r\nEdge material:\r\n- Veneer-, coil- and strip ware\r\n- Plastic-, coil- and strip ware\r\n- Massive wood slats\r\n\r\nEdge height: min. approx. 14mm, max. approx. 55mm\r\nEdge thickness: min. approx. 0,4mm, max approx. 20mm\r\n\r\nPanel thickness: min. approx. 10mm, max. approx. 50mm\r\nPanel width: min. approx. 85mm (60mm)\r\nPanel length: min. approx. 150mm\r\nSlats: max. approx. 20x55mm\r\n\r\nPanel overhang out of the chain track: approx. 35mm\r\n\r\nDrive for throughfeed speed of approx. 8- ...

Category: 1007: drilling machinery
New in: 2011
Price: 112.050 €
Location: Land-pl PL 33-112 Tarnów
Seller: SWENSKA POWERHOUSE Marcin Piotr Rejch

DRILLTO ZT-25 CDF to look: 33-112 Tarnów, Ma?opolskie VERY GOOD CONDITION! NET PRICE: 465 000 EUR Production year: 2011 mileage: 717 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch horizontal drilling rig DRILLTO ZT-25 CDF. Machine in very good condition (fully operational), little used (only the 717 mtg (hours). Some details about the drilling rig: -weight approx. 10T -transport length: 6.60 m -width: 2.18 m -height: 2.10 m -the force of pulling and pushing 25t -steel track pads, rubber -diesel 132 kW -torque 11000 Nm -set reaming tools with universal joints (fi 200, 300, 400, 500, 600) -the probe -drilling cable fi 73x282 (94 forged rods x 3 m  ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 6,1 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt weight: 8.514 kg range L-W-H: 4910x1900x2550 mm

Category: 208: lacquer machines
New in: used
Price: request quote
Location: NRW
Seller: Ingo Brötzmann Maschinen und Anlagen e.K.

-Manufacturer Finnrose, Aagaard - built in 2005 - number of drying 1 STK. - size drying 1 - number of controllable temperature zone 1 STK. - number supply air devices 1 STK. - flow 6.000 m³/h - heat performance 32,400 kcal / 38 length kW â with heat exchanger, heating water - 5,500 mm - 4,600 mm width - height 2500 mm - location, in stock - Volt, Hz 400 / 50

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 120 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 65 mm/min work stroke: 160 mm dayligth: 385 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 6.913 kg range L-W-H: 4250x1900x2500 mm

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 1995
Price: request quote
Location: NRW
Seller: Ingo Brötzmann Maschinen und Anlagen e.K.

-Manufacturer Höcker Polytechnik - type. SV 25/250 - year of construction 1995 - outlet diameter, suction side 250 mm -Outlet diameter, 250 mm side -Air performance 5,080 m ³/h -Wheel for chips -Impeller made of steel - motor output 5.5 kW -Direct driven -Speed 2,900 RPM -Pressing 2270 PA -Location: in stock -Volt / HZ 400 / 50 - maximum voltage +/-5%

Category: 207: gluespreader machines
New in: 2012
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided egde banding machine\r\nBrand: IMA\r\nType: Advantage 320\r\nYear: 2012\r\n\r\nAnti-stick solvent application\r\n\r\nPre-milling unit 2 motors á 4 kW\r\nEmpty space for pre-heating of the workpiece edge\r\nGluing unit with glue application 0,8 l (hotmelt or PU-glue)\r\nMain pressure roller and 5 post-pressure rollers\r\n\r\nEnd trimming unit pneumatical swivable to 0° or 8° with 2 motors\r\n\r\nContour trimming unit SKF-L with motor quick change device\r\nFor milling of strip overhangs on frontal and rear workpiece profiles top and bottom, as well as the lower and upper lengthwise edge, without inner radius\r\n\r\nProfile scraping unit\r\n\r\nEmpty space for cleaning agent sp ...

Category: 109: other metal working machines
New in: 1998
Price: request quote
Location: Eersel
Seller: Maschinenhandel Eersel

This model is is the very high precision model â?¢ Very nice machine, well cared for, very good maintenance â?¢ Travels X x Y x Z (mm) 520 x 370 x 320 â?¢ Travel U x V (mm) 35 â?¢ Table work area (mm) 780 x 560 â?¢ Maximum work piece size (mm) 940 x 780 x 320 â?¢ Maximum fluid height (mm) 335 â?¢ Maximum work piece weight (kg) 1500 â?¢ Wire electrode diameter (mm) 0.07,0.1,0.15,0.2,0.25,0.3 â?¢ Wire feedrate range (mm / s) 15 degree / 100 mmt â?¢ Dielectric fluid (L) 830 â?¢ Machine dimensions W xD x H (mm) 2440 x 2487 x 2245 â?¢ Floor space W x D (m ...

Category: 1900: general inventory
New in: 2017
Price: request quote
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 4 kg Dimensions (l x w x h) approx.: 500x500x400 mm Description: 2 pieces, impact drill in case with accessories, for details see pictures

Category: 109: other metal working machines
New in: used
Price: 11.000 €
Location: Land-ro RO
Seller: Kuhn & Partner Romania SRL

Brand Chiron Model FZ12W ID S303 Status Active Price 11.000 € + VAT Year of manufacture 1993 Location Oradea, Romania board dimensions 660 x 350 mm voltage 360 V weight 3000 kg height 2680 mm width 2600 mm depth 3080 mm mandrel engine power 9,5 kW

Category: 207: gluespreader machines
New in: 1999
Price: 16.500 €
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided egde banding machine Brand: BRANDT Type: KD 99 F Year: 1999 With Ligmatech workpiece return type: ZHR 15 Technical data: Electrical interface LIGMATECH ZHR 15 V-belt top up to 1500 mm (installing) length Infeed fence adjustable Special infeed fence for the process of laminate overhangs Min. workpiece thickness: 16 mm Max. laminate overhang: 5 mm Program controlled adjustment infeed fence Program controlled adjustment pressure zone Pre-milling unit 2 X 3,0 KW 200 HZ Gluing unit QA 34 QUICKMELT (changable) End trimming unit HL 83 chamfer / straight Max. cross-section 900 mm2 Max. 45 mm x 20 mm Rough milling unit 2X1,5 KW 0 degrees Mill ...

Category: 1108: spare parts
New in: used
Price: 1.900 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: A308002C -Natural Gas -Complete Please note: Picture shows the bare cylinder head. After order it will be reconditioned ---------------------------------------------------------------------- ------- We also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 207: gluespreader machines
New in: 2017
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: IMA\r\nType: Novimat/Compact//I/G80/700/L12/\r\nYear: 2017\r\n\r\nTechnical data:\r\nAdjustable axis for autom. adjustments of the infeed fence\r\nFeeding table approx. 500x500 mm\r\nAnti-stick solvent application\r\n\r\nPre-milling unit wit 2 motors á 4 kW\r\n\r\nPre-melting unit approx. 1 l\r\nAutomatical granulate supply\r\nAutomatical PU melting system Quickmelt\r\n5 post-pressure rollers\r\n\r\nEnd trimming unit swivable from 0° or 8° with 2 motors\r\n\r\nMilling unit with 2 motors\r\n- Rough-/flush milling\r\n- Profile-/chamfer milling\r\n\r\nContour trimming unit with 4 motors\r\n\r\nProfile-/flat scraping unit\r\n\r\nBuffing unit\r\n\r\n ...

Category: 1108: spare parts
New in: used
Price: 4.500 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: A308023 LB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm

Category: 1108: spare parts
New in: used
Price: 500 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: C308072 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

bending speed: 2,1 m/min roll diameter: 137 / 132 / 132 mm : 35 / 30 / 30 mm CE-Certificate: bending capacity - angular iron: 40 x 5, Ø 400-500 mm bending capacity - flat iron: 60 x 10, Ø 500 mm : 60 x 2, Ø 900 mm total power requirement: 0,75 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 850 x 730 x 1500 mm Foot pedal with emergency stop button two driven lower rolls Upper pressure roll mechanically adjustable Horizontal and vertical operation Shafts are made of special steel movable control unit adjustable guide carriages with exchangeable slide rails

Category: 1108: spare parts
New in: used
Price: 600 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: 308004 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 105: saws
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

cutting diameter: 90° / 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: mm table height: 585 mm cutting speed: 20 - 100 m/min : 850 x 810 mm cutting capacity - square: 45° / 480 x 480 mm cutting capacity - round: 90° / 810 mm cutting capacity - flat: 45° / 480 x 850 mm cutting capacity - round: 90° / 480 mm cutting capacity - square: 45° / 480 mm total power requirement: 4 kW weight of the machine ca.: 3080 t dimensions of the machine ca.: 3900x 1 1200 x 2350 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that sup ...

Category: 1108: spare parts
New in: used
Price: 30.000 €
Location: Land-de DE 48480 Spelle
Seller: August Storm GmbH & Co. KG

RECON Part number: 308027 C. HT511133 / TPS48-F32 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: ab Lager Monheim am Rhein
Seller: Kemmerich Werkzeugmaschinen GmbH

bore capacity in steel (diameter): 125 mm arm length: 4000 mm workpiece height max.: mm threading:: 80 mm column diameter: 800 mm bore head horizontal movement: 3400 mm drilling head vertical adjustable: 1190 mm spindle stroke: 560 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 6,3-800 U/min feed range: 0,06 - 3,2 mm/U tool taper: metr. 80 total power requirement: 18 kW weight of the machine ca.: 28,5 t dimensions of the machine ca.: 5910 x 2000 x 5120 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast constructio ...

Category: 1108: spare parts
New in: used
Price: 1.400 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: AA308007C ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: ab Lager Monheim am Rhein
Seller: Kemmerich Werkzeugmaschinen GmbH

bore capacity in steel (diameter): 63 mm arm length: 2000 mm workpiece height max.: mm threading:: 48 mm column diameter: 450 mm bore head horizontal movement: 1550 mm drilling head vertical adjustable: 800 mm spindle stroke: 400 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1600 mm turning speed range: 25-1600 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 5,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3080 x 1250 x 3290 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with e ...

Category: 1108: spare parts
New in: used
Price: 275 €
Location: Land-de DE
Seller: August Storm GmbH & Co. KG

RECON Part number: 308042G ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Category: 107: sheet metal working
New in: used
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 3080 mm plate thickness: 6,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,60 x 2,00 x 2,5 m - motorized back gauge - Angle stop - support arms - Dimensions LxWxH plus angle stop 3.70 x 1.90 x 1.50 m

Category: 709: other food machines
New in: used
Price: request quote
Location: Land-fr FR
Seller: MAT DE SURONE

Capacity: 400 cones per hour Automatic dosing and spreading of the sweet dough from a pressure vessel Regulated cooking temperature

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 80 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 7,5 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 380 mm oil volume: 150 ltr. table height: 900 mm voltage: 400 Volt weight: 5.227 kg range L-W-H: 3750x1950x2400 mm

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 87719 Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Maximum cutting output: 16 mm, 45 kg / mm² Maximum cutting width: 3050 mm Blade length: 3100 mm Stand projection: 300 mm Continuity betw. the attacks: 3080 mm Adjustment of RIP fence: 10-1000 mm Cutting angle of the upper cutter: 2 ° 30' Maximum pressure in the hydraulic system: 280 bar. Lower holder system pressure: 80 bar. Pressure in the withdrawal system: 1100 ATM. Nitrogen subpoena in the hydraulic accumulator: 85 bar. Content of the hydraulic accumulator: 4 ltr. Content of the oil tanks: 480 ltr. Oil quality hydraulic oil: 3° E at 50 ° C Operating voltage, three-phase: 380 V Control voltage: 220 V Total connected load: 31 kW Machine weight: 14500 kg Facilities: 1 set ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 600 t chamfer lenght: 4100 mm distance between columns: 3400 mm column arm: 510 mm ram stroke speed: 80,0 mm/sec return speed: 75,0 mm/sec work speed: 8,3 mm/min work stroke: 375 mm dayligth: 800 mm oil volume: 500 ltr. table height: 1200 mm voltage: 400 Volt back stop - adjustable: 0 - 800 mm weight: 47.091 kg range L-W-H: 5.900 x 2.650 x 3.775 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)