m 3080 used for sale

Geared motor, electric motor, three-phase motor -Speed: 56 rpm -Power: 0.37 kW -Design: B5 angle -Diameter hollow shaft: Ø 20 mm -Protection rating: IP 54 -Quantity: 1x motors available -Dimensions: 540/330/H220 mm -Weight: 24kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

Debotec A-50 mixer Serial: 1215 Stainless 50Kg mixer, tipping bowl to discharge,

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

Gear motor, electric motor, three-phase motor -Speed: 61.3 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 28 mm -Protection class: IP 54 -Dimensions: 200/200/H425 mm -Weight: 26 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 358-1850 rpm -Motor: adjustable -Shaft: Ø 11 mm -Construction: B5 -Number: 1 motors available -Dimensions: 300/180/H190 mm -Weight: 9.8 kg

Gear motor, electric motor, electric gear motor -Speed: 4.0 rpm -Power: 0.55 kW -Diameter shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 755/240/H240 mm -Weight: 44 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Gear motor, electric motor -Speed: 57/114 rpm -Power: 1.1/1.8 kW -Construction: B5 angle -Diameter hollow shaft: Ø 28 mm -Protection class: IP 54 -Brake -Dimensions: 570/250/H250 mm -Weight: 37 kg

Gear motor, electric motor, three-phase motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 520/250/H220 mm -Weight: 26 kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 2 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Gear motor electric motor -Speed: 137 rpm -Power: 0.25 kW -Coupling: 24 V -Construction: hollow shaft angle B5 -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Dimensions: 440/160/H180 mm -Weight: 14 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg

geared motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 19 mm -Brake -Protection class: IP 54 -Quantity: 1x motor available -Dimensions: 520/203/H185 mm -Weight: 18.55 kg

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK1 -Number: 1x recordings available -Price: per piece -adjustable in length -Total length: mm -Weight: 1.4 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 1.6 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 3.6 kg/piece

Tool holder, milling holder, milling tool -15x recordings: SK40 -Adapter -Take: SK40 -Tool holder: 3x MK1/1x MK2/3x MK3/8x MK4 -Total length: mm -Sale: only complete -Weight: 23 kg

tool holder, milling holder, milling tool -7x shots: SK40 -Adapter -Mounting: SK40 -Holder tool: MK4 -Drill chucks, face chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 9.4 kg

Tool holder, milling holder, milling tool -8x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK3 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9 kg

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Tool holder, milling holder, milling tool -11x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK2 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9.3 kg

Tool holder, milling holder, milling tool -10x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK1 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 8.5 kg

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK4 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 13x recordings available -Price: per piece -Total length: 200 mm -Weight: 1.1 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 22x recordings available -Price: per piece -Total length: 175 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 155 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 230 mm -Weight: 1.2 kg/piece

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

VERTICAL PACKING MASCHINE

Tool holder, milling holder, milling tool -Number: 4x holder SK50 -different designs -Adapter to: MK1/MK3/MK4/MK5 -Sale: only complete -Weight: 11.8 kg

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

geared motor, electric motor -with integrated frequency converter 0.37 kW -Speed: 60 rpm -Power: 0.55 kW -Design: B3 angle -Shaft diameter: Ø 20 mm -Brake -Protection class: IP 54 -Dimensions: 380/160/H240 mm -Weight: 13.5 kg

Geared motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 109 rpm -Shaft: Ø 25 mm -Design: B3 angle -Protection class: IP 55 -Quantity: 1x motor available -Dimensions: 490/230/H170 mm -Weight: 22.6 kg

Type MB6023HK Working width 230 mm Working height 150 mm 6 spindles B, R,L, T, T,B Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kW Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania

Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 28 mm -Protection class: IP 54 -Dimensions: 425/160/H220 mm -Weight: 21 kg

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.

Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg