müller mitteltal used for sale

Schmalheftkopf / Slim Stitching Head Müller Martini  HK 45 0305.0100 Slim Stitching Head Müller Martini  HK 45 0305.0100

Muller Martini perforation cylinder 25,5 ", pitch 1/4, in very good condition. For MM progress 520.

MM 3694 ZTM 3 gatherer – 12 stations – hand feed station MM 3030-19 Klebebinder MM 3632 stapler (year 2013) MM 3673 trimmer SCS Automaberg Easy Fly (year 2008)

pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heftkopf / Stitching Head Müller Martini HK 75 0881.4052 Stitching Head Müller Martini HK 75 0881.4052

Heftkopf / Stitching Head Müller Martini HK 75 0881.00015.4 Stitching Head Müller Martini HK 75 0881.00015.4

Heftkopf / Stitching Head Müller Martini HK 75 0881 Stitching Head Müller Martini HK 75 0881

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Operating Weight: Approx. 7,000 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP / 2200 rpm Max Torque: 340 Nm / 1400–1700 rpm Displacement: 3.6 L Hydraulics: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 industrial-grade pneumatic tires Drive: 4-wheel drive (optional locking differential) Max. Travel Speed: 28 km/h Max. Digging Depth: ~3,500 mm (depending on arm config) Cabin: Enclosed with heat and ventilation system Swing Speed: ~9 rpm Attachment Compatibility: Standard bucket + quick coupler; Supports Hammers, Augers, Grapples, etc.

Designed for professionals who require more out of a mini excavator, the MB 30 is a powerhouse of precision. Whether you're breaking ground on infrastructure projects or navigating utility lines, this model's improved reach, digging depth, and hydraulic strength set a new standard in productivity. Rugged yet refined, it's built for intensive daily use.

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

Heftkopf / Stitching Head Müller Martini HK 75 0881.8070 Stitching Head Müller Martini HK 75 0881.8070

Heftkopf / Stitching Head Müller Martini HK 75 0881 Stitching Head Müller Martini HK 75 0881

Operating Weight: 7,500 kg Engine: Kubota V2607 (EURO-compliant) Power Output: 42.4 kW (56.8 HP) at 2200 rpm Hydraulic Pump: PNM high-performance hydraulic pump Hydraulic Valves: HF & Parker control valves Bucket Capacity: 0.28 m³ Bucket Digging Force: 56 kN Arm Digging Force: 38 kN Swing Speed: 0–11 rpm Travel Speed: 2.8 km/h Gradeability: 70% (35°) Max Digging Depth: 3,898 mm Max Digging Height: 7,023 mm Max Dumping Height: 5,195 mm Tail Swing Radius: 1,730 mm Overall Dimensions (L × W × H): 6,054 mm × 2,216 mm × 2,672 mm

Operating Weight: 9,000 kg Engine: Cummins QSF2.8 (EURO V compliant) Power Output: 53 kW (71 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure pump Hydraulic Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Travel Motor: Eaton or PMP Hydraulic Working Pressure: 28 MPa Bucket Capacity: 0.4 m³ Maximum Digging Force: 58 kN Swing Speed: 0–12 rpm Traveling Speed: 2.8 km/h Gradeability: 70% (35°) Overall Dimensions: Length: 6,410 mm Width: 2,278 mm Height: 2,630 mm Undercarriage Width: 2,200 mm Ground clearance: 800 mm

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included

Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--

Heftkopf / Stitching Head Müller Martini HK 75 Heftkopf / Stitching Head Müller Martini HK 75

Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. 0360 4211 9 For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

Heftkopf / Stitching Head Müller Martini HK 75 Heftkopf / Stitching Head Müller Martini HK 75 0881.8101 Serial-No. ET029

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8 Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8

Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06 Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06

Heftkopf / Stitching Head Müller Martini HK45 0305.0400 Heftkopf / Stitching Head Müller Martini HK45 0305.0400

Muller Martini Concept year 2003, Max. Web Width: 520mm - 1 unwind, max. diameter 50" (127cm) with web guide - 6 wet offset printing units - 6 ink agiators, - Wet offset inserts, 6x 24", with reel rod (clamped) blanket cylinder - turn bars after towers no. 1, 2, - UV-drying, - file hole punching station - cross perforation stations with total 1 cylinder 24", - Remaliner punching "New Generation" for double stream production - length perforation- and length slitting station - 1 spiral folder with counter, web marking device and delivery table - 1 rewinder 50" (125cm) with web video

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details.

Profile bending machine manufactured in 1993. This Müller Profilierung 3 features a maximum strip width of 300 mm and can handle material thicknesses up to 8 mm. It includes 13 forming stands on interchangeable plates and 4 hydraulic punching units. If you are looking to get high-quality profile bending capabilities, consider the Müller Profilierung 3 machine we have for sale. Contact us for further details.

pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TANK SYSTEM For sale is a new, unused and originally packaged tank system from Müller Tankanlagen. The technical Description based on the final invoice of 12.11.2025. be examined. Fuel pump Müller Frontier Europe • Column no. 928962 according to the invoice; version for one product. • ATEX, MID and CE approvals according to the manufacturer's document. • Combined LCD display with LED and unit price display. • Specified standard output approx. 40 l/min; according to the invoice, depending on viscosity and system. • 400 V, 3-phase motor; Elaflex automatic nozzle with 4 m hose. • Stainless steel side panel and powder-coated steel computer head in RAL 9007. • Changeover 40/70 l/min for diesel according to the invoice. NOVOTEC SV base fuel terminal – functions according to invoice • Serial number 10076; one dispensing point. • Weatherproof, lockabl ...

Technical Specifications: Printing process: Wet offset Number of printing units: 8 Maximum printing width: 736 mm Maximum paper width: 740 mm Minimum paper width: 300 mm Maximum unwinding/rewinding roll diameter: 1,270 mm Maximum mechanical speed: 365 m/min (1,200 ft/min) Maximum printing speed: Depending on the installed equipment and operating conditions Paper weight: Approx. 40–250 g/m² Electrical supply: 400 V, 50 Hz, 3-phase Web tension control: Integrated Web guiding: Ultrasonic edge control Main machine control: Touchscreen-based control system Available Printing Cylinder Repeat Lengths: 520 mm, 524 mm, 540 mm, 544 mm, 550 mm, 558 mm, 570 mm, 580 mm, 602 mm, 607 mm, 636 mm, 639 mm, 645 mm and 680 mm. Printing Units: • 8 wet-offset printing units • Format-variable offset printing system • Plate cylinders with format-dependent configuration  ...

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

24" printing cassetes for MM Grapha. Gearpits 96. In good condition.

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printing inserts only for Muller Martini model Grapha: 4 x 16" 4 x 20" and 4 x 24"

6 feeders 1555 1 cover feeder 1529 1 stitching unit 380 – 3 stitching heads HK 75Q 1 three knife trimmer 449 MM 1564 belt delivery 1 MM Apollo 1540 stacker Compressors

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

2x cross perforation cylinders 16" in good condition. Available immediately

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.

Numbering and book printing unit 16" for Muller Martini Grapha

22" Cross perforation cilinders for Muller Martini Grapha. Good condition. Available immediately.

2x Muller Martini Progress cross perforation cylinders: 1. One has gear 72 pitc 1/3” 2. One has gear 96 Pitc 1/4” Good condition, no damages. Available immediately.

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...