lz used for sale

Used vacuum pump, roller piston pump for the fine vacuum range, suction capacity: 250m3/h Roller piston pump for the fine vacuum range, suction capacity: 250m3/h; Final pressure: depending on the performance of the pre-vacuum pump

Electronic Organizer PSION ORGANISER II Model LZ64 used tested ! Dimensions ( Organizer ): 195 x 78 x 30 mm Dimensions (packaging): 255 x 120 x 40 mm

year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...

Pressure total: 700 ton Stroke: 600 mm Daylight: 1000 mm Table surface area : 3000 x 1200 mm Slide area: 3000 x 1200 mm Approach speed: 150 mm / sec Working speed: 1 - 10 mm / sec Return speed: 150 mm / sec Die weight at the ram max.: 4000 kg Required power: 65 kW Weight of machine approx.: 62 ton

It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible.

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table

Gear motor, electric motor -Speed: 20 rpm -Power: 0.37 KW -Construction: B3 angle -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 540/170/H200 mm -Weight: 22 kg

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

Table width 1,000 mm Table length 2,500 mm Abrasive belt cover tape/both rollers Suction Floor space Length 3,850 mm Width 1,300 mm Height 1,300 mm

Key data: 280 mm

Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection

Description: Distance between centers: 800 mm Speed range: 32 - 1400 rpm Accessories: various multifix steel holders Type: AD With technical documentation as shown in the pictures weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,400 mm

Description: Turning diameter over bed: approx. 280 mm Turning diameter over support: approx. 140 mm Center width: approx. 400 mm Spindle bore: approx. 27 mm Speed range: 100 - 2000 rpm With drilling unit installed on the lathe (see pictures) Internal size designation of the lathe: 260 x 500 weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,600 mm

Heating plates with hard anodized coating All press surfaces are machined Two stage hydraulic pump with automatic change over from low to high pressure as standard Adjustable working pressure via pressure switch gear Oil level indicator on the oil tank Central control cabinet Press close and open with pushbutton Press time adjustable 0 – 36 minutes Adjustable opening 0 – 400 mm Temperature control Main switch to lock

Type: 3508 LZ22; II3D Ex ID A22 IP55 T125°C Data: 400V, 10A, 4.3 kW, 50 Hz, weight 210 kg

Plug-in relay, with rail socket and PT LED plug-in module, 9 pieces SIEMENS plug-in relay: LZX:PT570024 24V DC 4 changeover contact Switching capacity: 250 V AC, 6 A Rail socket: LZS:PT78740 PT LED plug-in module: EM 18 used, tested Dimensions( single relay ): 74 x 27 x 52 mm Dimensions( packaging ): 250 x 80 x 60 mm

Three-phase electric motor LZE ( ? ) ? 56?2N3 0,18 kW 2730 rpm 220 / 380V 3AC 50 Hz IP 54 Design: B14 K Shaft diameter: Ø 11 mm Shaft length: 20 mm Groove width: 4 mm Flange diameter: Ø 50 / 90 mm bolt circle diameter: Ø 65 mm 4x threaded hole: M5 x 0.8, depth: 10 mm New ! Dimensions: 210 x 120 x 145 mm

Sabotage-proof RC 2 emergency generator 41 kVA with internal automatic emergency power 72 hours with Yanmar engine 4 TNV 98 for mains parallel operation Aggregate type: stationary Design: Super soundproofed Technical data engine: Engine Manufacturer: Yanmar Engine Model: 4 TNV 98 Engine No.: in production Motor power: 37.7 KW electronically controlled Cooling: Water-cooled Tempering: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 and diesel B7 Technical data generator: Generator manufacturer: Mecc Alte Generator type: Sychron with AVR Gene. No.: in production Generator power: 45 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation with ÜSY Tank: Design: Base frame tank with drip pan Capacity / l ...

Nilfisk CTS40-LZ22 Industrial vacuum cleaner 2008, industrial vac cleaner, 4Kw rated, mobile, 3Ph