129,230 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Manufacturer: Lundberg Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8") transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - / Contact us at -
Display gluer- Lunex, Uni-Gluer U-1600, Year 2003, Nordson Gluesystem with 3x Guns
sheet width: 1020 mm plate thickness: 3,5 mm roll diameter: 90 mm total power requirement: 0,75 kW weight of the machine ca.: 310 kg Electric 380 Volt: Foot switch: Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 6 mm pre-bending: ja roll diameter: 140 mm roll speed: 1 - 6 m/min total power requirement: 2,2 kW weight of the machine ca.: 1120 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter separator for wood chips, wood dust, etc. on a chip hopper, chip silo. 104 filter bags with a total filter area of 222 m2. Explosion protection with Brilux explosion dampers Height 4400 mm, width 3050 mm, depth 2600 mm. Vibration cleaning of the filter bags.
- Min diameter 50 mm - Max diameter 400 mm - Work load each unit 10 Ton - Height adjustment 100 mm - Prisma angle 120 Gr - New price EUR 60.000
: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 € : 1 : 40 - 1.300 U/min : ISO 30 : 465 x 230 x 380 mm : 1000 x 280 mm : 2.2 kW : 1400 mm : 1300 mm : 2200 mm : 1120 kg : 90 ° : 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders User Manual in ENGLISH Does not comply with the German UVV &, Austrian AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.
1 fixed setting stick with roller quills 1 moving setting stick
Key data: 380 mm, 280 mm, 130 mm
Vest bezel range 200-380mm incl pins with rollers
Offered are 3 Fixed sticks for SUI 80 TOS TRENS SK bezels little used
Key data: 400 mm, 400 mm
1 Fixed stick/steady rest with roller quills for SUI 80 As good as new 400 mm passage
Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630
Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site
This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.
Allestimento: Safety jacket,Stato: used,Volume / Litri : 20.000,Tipologia: horizontal,Piedi : Saddles,Diametro interno: 2.500,Lunghezza Cilindro/mm: 3800,Altezza Totale: 2.950,Lunghezza Totale/mm: 4.700, Chiusino superiore : on the container,targa identificativa: Yes,Scarico : not available, Note: Manhole lid plated,Osservazioni: Container with safety double jacket made of Fe (according to DIN 6616D) Test overpressure container 2 bar Test overpressure Safety double jacket: 0.6 bar 2 loose Bearing saddles, Fe 1 manhole diameter 600 mm and 1 manhole diameter 500 mm container without
Two Roll Mill 42inch wide x 16inch diam. Right angle drive Brook Crompton Motor 50HP Lunn Safety Bar front and back of Mill Hand operated nips Compact
Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO
Wash wa lund WA LC40 with raetzmuehle RM40 for packing press 180p2 Nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm Maximum 2400 mm Hoehe Assumption 800 mm Weight 290 kg material 1.4301 / AISI 304 Connection for cleaning 1/2 internal Connection for washing 2 unless He mash release 1460 mm Maximum fruit release 800 mm Scope 12mm Cutting sieve ; New machine - best condition
Durchlauftrockner Elektroindustrieof en Elektroöfen Erwärmungsöfen Gasöfen Gastrockner Industrieöfen Industrietrockner Kammeröfen Kammertrockenöfen GMH GussGmbH Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen gienanth Wärmeprozessöfen trompetter-guss Warmhalteofen Partner buerstlein-guss heunisch-guss swt-guss Warmluftofen Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen gienanth Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen begalom Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -b ...
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 131 mm -Groove width: 27 mm -Dimensions: see photo technical drawing -Dimensions: 151/70/H42 mm -Weight: 2,1 kg
Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 173 mm -Groove width: 42 mm -Dimensions: see photo technical drawing -Dimensions: 205/82/H46 mm -Weight: 3.3 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm -Weight: 4.3 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 141 mm -Dimensions: see photo technical drawing -Dimensions: 157/72/H108 mm -Weight: 1.8 kg
Condenser GUENTNER Type: S GVH 080.1A/2x5 L(S) Cooling capacity: 673.4 kW Air volume flow: 151 000 m3/h Number of fans: 10 x 800 mm Dimensions: 10000 mm x 2300 mm x 1800 mm Volume: 300.3 l Number of pieces in stock: 2 Reference number: SK13 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm -Weight: 1.3 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 83 mm -Dimensions: see photo technical drawing -Dimensions: 100/72/H83 mm -Weight: 1.2 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 101 mm -Dimensions: see photo technical drawing -Dimensions: 117/83/H140 mm -Weight: 1.8 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 106 mm -Dimensions: see photo technical drawing -Dimensions: 125/95/H90 mm -Weight: 1.8 kg
Compressor Bitzer Type: HSK6461-40 Volume: 165 m3/h Cooling capacity: 57kW at -10ºC/40ºC R134a Number of pieces in stock: 1 Reference number: S2 Condition : Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 109/57/H157 mm -Weight: 1.2 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 179 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 205/80/H155 mm -Weight: 5.0 kg
Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact
Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm -Weight: 3.4 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg
Chiller LENNOX Type: NAC 270D NM1M Cooling capacity: 272.8 kW 2 x compressors Copeland: ZP295KCE-TWD-524 and 2 x compressors Copeland ZP 385KCE-TWD-524 R410A Built: 2008 Dimensions: 3600 mm x 2300 mm x 2000 mm Number of pieces in stock: 1 Condition: Used Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg
lunette, steady rest, lynette -Bezel: max. opening Ø 101 mm -Tip height: 125 mm -technical drawing: in the photos -Total dimensions: 275/55/H325 mm -Weight: 11.3 kg
lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 170/60/H140 mm -Weight: 2.0 kg/piece
Verbundanlagen Bitzer with original capacitors Deep-cave / Normal kuhlung -3x compressor Bitzer HSK6461-60-40P -KaeltePower: 177 kW at -10oC/40oC R134a 292.8 kW at -10oC/40oC R407C -Volume: 3 x 165 m3/h -Pieces in stock: 2 pieces -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.
10 € 
