luigi dal trozzo used for sale

Product-specific. Various in stock. Enquire for details.

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Machine Type: TIG Welding Machine Water-cooled DC and AC system Make Dalex Type TGKW 55 Connection voltage 2 x 400 volts Adjustment range 3 – 225 amps Duty cycle 60% ED at 225 amps 100% ED at 175 amps Current setting 5 switching levels max. weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 Amps Dimensions L x W x H 1,300 x 600 x 850 mm, incl. bottle cage Weight approx. 200 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20, 4 mtr. 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped Warranty: 6 months from the date of delivery Original price €3,400.00 + VAT  ...

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Robot DAL MASCHIO TYE : GINKO Année : 2004 Course en X : 2070 mm Course en Y : 1180 mm Course en Z : 500 mm

approx. 360 fields (more on request) shelving units, plug-in system, manufacturer dalminels, 1.30m x 0.60m (other dimensions available), frame height 2.20m (other heights available) - new product - : Price per basic field: 119.-€ (net)! Price per cultivation field: 99.-€ (net)! Acceptance only by truck, otherwise the transport costs are likely to be relatively high! Approx. 360 fields fit per truck (depending on the configuration) Manufacturer: dalminels, Italy Type: Errex Year of manufacture: New! Galvanized Frame height approx. 2.20m (other heights e.g. 2m on request)! Load capacity per level: 141kg 5 floors per field – additional floors for an extra charge Shelves: approx. 1.30m x 0.60m (the shelves consist of 3 trays with a depth of 20cm) In this system, the bottoms are placed in a rail on the sides. Condition: New Available: Delivery time: approx. 4 wee ...

TIG welding machine, welding machine, TIG welding machine -TIG welding machine AC/DC direct/alternating current -Hose packages: 3 -Max. welding current: 225 A -Air-cooled -incl. ground cable -Gas valve -Dimensions: 610/1270/H860 mm -Weight: 288 kg

Spare welding controllers for resistance welding machines also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043

Spare welding controllers for resistance welding machines MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1

Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Balancer, machine balancer -Type: D5-45 -Load capacity per piece: 30-45 kg -Rope length: 2 m -Quantity: 2 pieces available -Price: per piece -Own weight: 18 kg

TIG welding machine -Nimak electrode unit -Dalex converter -Hose package -ground cable

Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

Robot DAL MASCHIO DM 3E 2800 for big injection moulding machine 1600 ton // condition - perfect // Price 12.000 Euro

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2014! (excellent condition). Standard column 2.000 mm tall with 470 mm extension. Designed for a maximum lifting load of 30 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. With console and special gripper for bags. Can be retro-fitted with a standard console for safety- or jerry-can hook at additional cost. Visible frame is for transport purposes only and not included (available at additional cost).

Replacement welding controllers 19" for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

1 used pneumatic column-mounted handling manipulator (balancer), manufacturer Dalmec, type Partner PMC, built 2008 (excellent condition). Column 1,200 mm. Designed for max load capacity 20 KG. Working radius 3,100 mm. Vertical stroke 1,200 mm. With gripper with 4 suction cups and built-in vacuum generator. Visible frame is for transport purposes only and not included (available at additional cost).

Replacement welding controllers 19" for resistance welding machines MPS 8043/1 MPS 8043 Q

1 gebrauchter pneumatischer, überkopf montierter Handhabungsmanipulator (Balancer), Hersteller Dalmec, Typ Partner, Baujahr 1993. Schwank-Greifer mit Sauger und Venturi Vakumerzeuger mit max. Tragkraft 120 KG. Max. Arbeitsradius 2.200 mm, vertikaler Hub von 150 bis 1.500 mm. Zuletzt im Einsatz zum Manipulieren von Türen.

1 of used pneumatic, overhead mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Partner PRF, new 1993. Tilting gripper-head with suction cups and venturi vacuum generator for max. load 120 KG. Maximum radius 2.200 mm. Vertical stroke 150 to 1.500 mm. 2 Rows of each 9 suctioncups, width adjustable between 455 and 945 mm. Last used for handling doors.

1 of used pneumatic, overhead mounted, moveable on rails, industrial manipulator / lifting device (balancer), make Dalmec, type Partner Equo PES, new 1993. Gripper-head with 4 length/width simultaneously adjustable suction cups (from 1.110 x 360 to 1.650 x 650 mm) with venturi vacuum generator for max. load 120 KG. Maximum turning radius 2.500 mm. Vertical stroke 1.250 mm. Tube length 5.000 mm. Last used for handling sheets of steel. Rails not included.

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posivel PVC-26, new 2011 (excellent condition). Column 2.350 mm tall. Designed for a maximum lifting load of 36 KG. Maximum radius 2.600 mm. Vertical stroke 1.400 mm. Fitted with 71 mm diameter expander-type gripper for tubes with 90-degree (vertical/horizontal) swivel motion. 2 units available. Visible rack is for transport purposes only and not included (available at additional cost).

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

DALEX 50Hz AC welding transformer 160kVA Rated Power: 160kVA/50%ED Voltage Prim.: 400V50Hz Voltage sec.: 6.25 to 9.75V in 4 steps Weight: 223kg

DALEX two-hand safety relay ZS 2-1 --- 24VDC for legacy Dalex PMS systems

Replacement - control stage for old Dalex systems SF 16/25 1 time asynchronous welding time limiter S_21.91007.1

DALEX 50Hz AC welding transformer 100kVA Rated Power: 100kVA/50%ED Voltage Prim.: 380V50Hz Voltage sec.: 8.2V Weight: 165kg

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder DALMEC stroke: 360 mm Rod diameter: Ø 35 mm used, tested ! Dimensions: 580 x 155 x 140 mm

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2004. Column length 2.300 mm. Designed for a maximum lifting load of 80 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. Standard operating console currently fitted with 500 kg rotating safety-hook. Other types of hooks for various products can be fitted at additional cost. NOTE: visible mobile foot-plate in pictures is strictly for our demo purposes and not included.

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 279 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 255 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 354 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6969, , = More information =, , Empty weight: 4.500 kg, Type number: MF/280/DD GENERATOR 255 KVA

Spray-on gouing machine for rigid box mounting X-Y CNC Make Dalian Jori Model ZH500 Year 2018 Min size 30 x 30 mm Maximum size 500 x 1000 mm Thickness 1 - 3 mm Details after manual placement of the cases the machine can start to spray on a pattern of glue onto the cases, after the operator can place manually a rigiid box onto the case. there are 2 types of heads, , can do circular forms, Available direct

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal

- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images

current capacity: 112 + Nebenleitung 63 kVA throat: . mm contact pressure capacity: . kp total power requirement: . kW weight of the machine ca.: 0,475 t dimensions of the machine ca.: . m The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bürkle, Type: DALD 1300, Year: 1990, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Operating side: links, Working height: ca.900, Widht of roller coater: 1350, Widht of metering roller: 1350, Attachment bracket roller: yes, rbakel: no, Work piece thickness max mm: 5, Feeding speed min/max: 5-25, Hight adjustment by engine: no, Year :1990

Manufacturer: Bürkle, Type: Doppelwalze DAL 2, Year: 1992, Work piece width min-max mm: 10 - 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 120, Operating side: rechts, UV-laquer roller: yes, regelbarer Direktantrieb für Auftragswalze: yes , Auftragswalzengeschwindigkeit m/min.: 5 - 30, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Attachment bracket roller: yes, everse drive: yes, rbakel: 1 x, Feeding speed min/max: 5 - 30, Hight adjustment by engine: yes, Pump system: Membrane, Year :1992

Manufacturer: Bürkle Lackauftragsmaschine , Type: DAL 1, Year: 1989, Control: hand, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-120, Operating side: rechts, Working height: 890 +-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 0,75, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Durchmesser Auftragswalze mm: 238, Dosierwalze verchromt: yes, Attachment bracket roller: yes, rbakel: yes, Year :1989

Description X axis: 2000 mm Y axis: 1600 mm Z axis: 1100 mm motors: brushless Clamp tilt: 90° indicative size of the press (ton): up to 500 ton max load: 17 kg

Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.

current capacity: - kVA throat: - mm contact pressure capacity: - kp Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.