low used for sale

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

This is a rectangular pressure cooker FER250 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. The RRP for this device is €29,970 net. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal Technical de ...

Eirich mixer granulator 3000 liter capacity Semi-mobile body with 4 hydraulic supports with low-bed low-loader transportable approx. 27 tonnes. Container drive 2 x 22 KW Whirler drive 160 KW Water and chemical dosing Mixer weighing Hydraulic unit Compressor Complete factory control for feeding and discharging conveyor belts Machine was used by us for the production of cat litter i.e. Various wet and dry components were weighed and then slowly homogenized and then granulated with different differential speeds to a stable granulate 1-5 mm. The system includes a complete control system.

Our KoMoMix+ is a beautiful high-performance blender that also shines from the inside due to its extremely high-quality components. In addition, it is produced fairly and environmentally friendly in Austria, not in low-wage factories from the Far East. There has (probably) never been like this before! The KoMoMix+ is available in 6 trendy colours. Black we have in stock ready for shipment Do kitchen appliances always have to look boring and be made of plastic and metal? No! We have taken a radically different approach and designed a beautiful high-performance blender with the KoMoMix+, which brings in some revolutionary features, e.g. a housing made of solid beech wood instead of plastic. Or the removable cork handle. We have carefully selected every single part of the KoMoMix+, developing every little detail for years ? until we were 100% satisfied. We didn't just want to build the next ...

The Cabero heat exchanger model AC/VC099EB/IN is a powerful heat exchanger designed for use in industrial applications. With a test pressure of 32 bar and an operating overpressure of 28 bar, it is able to withstand even high loads. The heat exchanger consists of a robust housing made of high-quality stainless steel to ensure high resistance to corrosion and wear. Inside, there are numerous close-fitting stainless steel tubes that ensure effective heat transfer. The AC/VC099EB/IN is a plate-shaped heat exchanger capable of achieving high heat output with low pressure drop. It can be used for a variety of applications, including air conditioning of buildings, cooling of machinery and heat recovery in industrial processes. The heat exchanger is easy to install and maintain as it has a robust and accessible frame that allows easy handling and cleaning. With its high reliability and ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

CUMMINS 2,000 kW Natural Gas Generator Set Condition: Low Hour 990 Hours Since New Engine: Brand: Cummins Model: QSV91-G3 Serial#: 66302908 Date of Manufacture: 10/02/2013 Fuel Type: Natural Gas Governor: Electronic Air Cleaner: Dry Type Flywheel Hsg. Size: N/A Cooling: Radiator Cooled Alternator: None Starter: 24 Volt Electric Starter EPA Tier Rating: No Tier Rating Package: Brand: Cummins Model: C2000 N6C Serial#: K13K591216 Control Panel: with Autostart and Safety Shutdowns Breaker: No 0 Amp Enclosure: None Fuel tank: Battery Charger: No Battery(ies): No Block Heater: Yes Muffler(s): No Trailer/Chassis: No Trailer Title Available: No Notes: Rated Continuous Prime Power Generator: Brand: Newage Model: MVS1804R2 Serial#: P13J026650 kW: 2,000 kVA: 2,500.00 Rating: Continuous Volts: 2400/4160 Amps: 347 Phase: Three Phase Power Factor: 0.8 Temp. Rise: 125° Frame Size: 51 # ...

Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, Installation: 2015, equipment: Software, cable, heat bath, file formats: STL, Accessories post processing: On demand, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]), support material: AR-S1 (water soluble support material), Accessories post-processing: On demand, Installation space (x,  ...

This is a rectangular pressure cooker FER300 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Technical details: •Dimensions WxDxH: 1600x850x900 •Weig ...

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Used roll packer Manufacturer: Bergmann Type: RP 7801-69 Year of manufacture: unknown specifications: Weight: 3,100 kg Power: 5.5 kW, 12.5 A Pmax.: 220 bar Noise level: 69 dB(A) The hydraulic motor has recently been renewed. Technical description: The rolling roller for compaction of waste and garbage is an invention from BERGMANN. For 30 years, this technology has been in continuous use worldwide – at recycling centres, in wholesale markets, industrial plants and elsewhere. Clean, highly efficient and extremely low-maintenance! The principle is simple: a heavy-duty compaction roller with hydraulic self-propulsion is guided over an articulated mast in the container and captures, tears and compacts the Einfüllgut.Im dialogue with its customers, BERGMANN has repeatedly expanded its machine family of roll packers: from roll packers, which have its fixed  ...

2 warehouses, gable roof, 280m2 and 72m2 - used -: Hall 1 (280m2) = 25.000.-€ (net), dismantled, packed and loaded! Hall 2 (72m2) = 10.000.-€ (net), dismantled, packed and loaded! Condition: good – very good Available from June 2024 Location: 50374 Erftstadt Hall 1: Manufacturer: Tepe Type: SD 10.08m, multi-purpose hall in steel structure Year of construction: 2007 Metrics: Width: 10.08m Length: 8 fields à 3.50m = 28m Eaves height: 4.55m Ridge height: 5.05m Lateral interior height: 4m Frame spacing: 3.50m Snow load: 0.85 kNm2 Wind Load: Zone 2 Inland Building materials: Softwood of sorting class S10/MS10 Concrete C25/30, reinforcing steel BSt 500 Hollow sections S235JRG DIN EN 10025 Structural steel S 235JRG DIN EN 10025 Trapezoidal steel sheets StE 320-37. Dowels according to letter of approval Screws 5.6 Pitched roof with a low roof pitch of 6  ...

Machine number: 2022-548 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G11 Rated Power: 77KvA Continuous power: 70KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Machine number: 2022-546 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G2 Rated Power: 55KvA Continuous power: 50KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. 234L Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Machine number: 2022-549 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 6BTAA5.9-G12 Rated Power: 165KvA Continuous power: 150KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L342 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup err ...

Machine number: 2022-547 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G13 Rated Power: 110KvA Continuous power: 100KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup erro ...

Machine number: 2022-545 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4B3.9-G12 Rated Power: 33KvA Continuous power: 30 KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. 135L Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: TCD 4.1 L4-SV Engine No.: in production Power: 115 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-D Gene. No.: in production Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length  ...

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: F 3 L 2011 Engine No.: in production Power: 19 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Sychron with AVR Gene. No.: in production Generator power: 20 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 50 Dimensions of the power unit: Width approx. mm: 752 Height approx. mm: 1.130 Length a ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Perkins Engine: 404A-22G1 Engine No.: in production Power: 18.4 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: NPE32-2M/4C Gene. No.: in production Generator power: 20 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 90 Dimensions of the power unit: Width approx. mm: 700 Height approx. mm: 1.650 Leng ...

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination), The water can be mechanically filtered with a water screening system (available separately), electric cabinet, Users manuals , drawings, CE compliance

Hand lever pump, hydraulic pump, hand pump LUKAS HYDRAULIK Gmbh ZPH 1A/1 PN500 841200120 Pressure: max. 500 bar Flow rate per stroke (low pressure): 10 cm3 Flow rate per stroke ( high pressure ): 1.6 cm3 Automatic switching (low pressure to high pressure): at 100 bar tank capacity: 1.3 l usable quantity: 1.1 l with documents ! used, tested ! Dimensions: 710 x 210 x 175 mm

Key data: 6500 mm, 2000 mm, 6000 W

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

UV Technology UV Oven Stainless, Static multipurpose UV oven, this machine will allow products to be transferred from low care to high care, it uses four removable UV cassettes, it has two doors that open 180 degree to allow access for the product from both low and high care, aperture 500mm x 500mm, 3Ph

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Insertion with tweezers; Feeding leaflet/brief leaflet; Feeding pots; Closure case; Exit with expulsion. Machine weight: kg. 2200 Compressed air consumption: Nl/min. 200 Pressure: 6 bar Total absorption installed: kW 3 CASES DIMENSIONS (MM): Minute: A = 20; B = 24; C/H (Low) = 40; High C/H: 50 Maximum: . : A = 120; B = 100; C/H (Low) = 100; C/H (High): 180; A + B = 200

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

This Agilista 3200W 3D printer is for sale due to a changed range of parts. Various consumables still available and will be included if interested. A more detailed list can be submitted later if you are generally interested in the printer. Last service carried out by the manufacturer in 2015. Service reports from 2015 onwards can be submitted later if required. The printer now has almost 6000 operating hours., Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, equipment: Software, cable, heat bath, file formats: STL, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Installation: 2015, Accessories post processing: On demand, Net installation space for  ...

LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Produced ( 0,33 L 0,5 L 1,0 L 1,5 L 2,0 L) AUXILARY EQUIPM

Refrigerator Eurochiller, model GCA045 Production - Italy. Issue 2008. Working. the plate heat exchanger was replaced with a shell-and-tube heat exchanger, a vibration damper was installed. Volt 400 HZ 50 kw 18.5 A 34 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C

The sale is intended for the entire brewery in the body, only and exclusively in the body. Steamed room from two 15hl semi automatic vats Ecobrewtech Touchscreen system control panel with recipe programming Very high precision electronic fiscal meter Cold (glycol) and hot (steam) storage tank of 30hl each. Double stage heat exchanger (cold water and direct glycol) 158hl cellar (2 45hl fermenters, 1 24hl fermenter, 1 29hl fermenter and 1 15hl fermenter) Steam generator year 2020 of 150kg / hour with pressure reducer (low pressure work but also high if necessary) Softener Chiller year 2020 from 23kw Manual 4-jaw isobaric bottling machine, July 2021 Cold room about 30sqm year 2020 Wheeled pump for washing year 2020 Product transfer tubes 2020 Skid 2 pumps for glycol and glycol tank 500lt 2 stainless steel control panels for fermenters control (total 10 slots, 7 active therm ...

This high-quality laboratory freezer is a must-have for any lab that requires ultra-low temperature storage. With a spacious interior and sturdy construction, this freezer is perfect for storing a variety of items in a safe and secure environment. It is designed to maintain a constant temperature, ensuring that your samples remain fresh and protected at all times. Ideal for use in physical, emergency, dental, medical, microbiological, and biological laboratories, this freezer is made by PHCBI and is of the highest quality. It is a Type freezer, specifically designed for use in labs, and is branded PHCBI. Dont miss out on the opportunity to own this exceptional piece of lab equipment. Power Draw:0.81kWEcological Features:Designed and constructed for peak performance and reliability while maintaining efficient operating costs. Type:Upright Capacity:360l Insulation type:VIP High energy effi ...

Metal laser cutting machine for sale. Inspection of the city of Krasnoyarsk. The set includes 2 replaceable portal-type hydraulic tables. Operating range Laser processing area, mm: 3000x1500; Maximum distributed load on the table, kg: 1000; Machine accuracy parameters (with feedback sensors) Positioning accuracy along the X, Y, Z axes mm/m: ±0.05; Positioning repeatability along the X, Y, Z axes, mm/m: ±0.005; Movements and feeds Working displacement along the X axis, mm: 3000; Working displacement along the Y axis, mm: 1500; Working movement along the Z axis, mm: 100; Speed of rapid movements along the X, Y axes, m/min (synchronously): 150; Speed of fast movements along the Z axis, m/min: 50; Working acceleration: up to 2g; Linear axes X-axis: linear drive; Y axis: linear actuator; Z axis: servo drive, precision rack and pinion with mechanical backlash compensation; ...

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

Used overhauled Compressor Siad Low and High pressure System for 1850 CBM Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022 like new and ready for delivery Machine has 1850 CBM of power Complete replacement of the Baty and replacement of bands bearings gaskets valves ATLAS Copco ZR4 screw overhaul with replacement of air filter oil filter and vapor filter ACS Z oil shuttle KIT intake KIT exhaust silencer filter flexible coupling replacement greasing of engine bearings and general compressor control The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need The machinery is guaranteed a 12 month or 2000 hour warranty on all replaced components Only HP LP tank and dryer need to be added The two machines Booster equipment and LP compressor Atlas were purchased by the same company where they increased its compres ...

Used Compressor Siad 1999 Looking for a reliable compressor to meet your high pressure needs We have just the machine for you a SIAD MS2 1242 B2 compressor manufactured in 1999 with only 238 operating hours This compressor is an excellent choice for those requiring powerful dependable and high pressure capable machinery The SIAD is equipped with a single stage and delivers a pressure output of 50 bar with a power output of 299 9 kW It s ideal for heavy duty high pressure applications in a range of industrial processes The compressor comes with built in safety features and manuals are provided for troubleshooting if required This compressor is currently in storage and has been well maintained With dimensions of L 5900 mm W 3000 mm H 2500 mm it fits well in any industrial space It is a versatile machine that can handle various applications making it suitable for use in multiple industries  ...

ROLL DIAMETER 400mm POLL WORKING LENGTH 1000mm MOTOR POWER 45 KW DIMENSIONS: 447118501760 (L×W×H) SPEED RATIO OF ROLLS 1:1,27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped wit ...

General SKUR1083 LocationBarneveld MakeDynamic Air (USA) TypeBella B320E-XN No.1096976 Year of construction2009 Main Features MaterialStainless steel Volume320 Ltr. Motor15 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity320 ltr Trough sizes1325x1105x850mm With cover(2x) Inletdia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x) Outlet1200x160mm (2x) Glands air purgedcheck Motor15 kW 380-420/660-725 volt (2x) Speed mixing shaft112 rpm MaterialStainless steel 1.4404 (316L) Information Total height1,7 M Weight1000 Kg CEcheck Floor space2,6x1,4 M Extra information This Fluidized Zone Mixer features an original design that achieves high fast, capacity, thorough, precision mixing of either dry bulk solids or liquids with solids. All particle sizes, shape or density can be used. The materials are mixed with fast, efficient and gen ...