british flag
Resale Logo

low used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information International trade with graphical machines and Equipments  Graphische Okkasionen Karakus  http://www.gok-karakus.de 
banner logo
start page > keywords low > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465500 1800

HELKUEB ECT-G8 for sale
ECT-Machine


8-channel device 245-250 V / 50 Hz maximum number of 120 VA / 0.53 A Dimensions: approx. 550 x 550 x 1.580 mm (W x D x H) included: 1 22 "monitor,. Fabr.: Medical panel Type: WMP-227 1 printer Fabr.:  ...
used machine
 
8-channel device
245-250 V / 50 Hz
maximum number of 120 VA / 0.53 A
Dimensions: approx. 550 x 550 x 1.580 mm (W x D x H)

included:

1 22 "monitor,.
Fabr.: Medical panel
Type: WMP-227

1 printer
Fabr.: Epson
Type: AcuLaser C1750W

various electrodes

2 pillows

1 elastic fabric strap
10 x 125 cm
2016
Price  
    request
125465222 2500

BAKUREKS CFK-B for sale
Blowing Rotary for PET bottles


2011
19,900 EU?  
  PL   request
125465390 804

HEIDELBERG Heidelberg Printmaster 52 4+ for sale


370 x 520 mm (14.5 x 20 ") OSTEO. 38 million Impr. Classic Center Alcolor Autoplate Autom. Ink roller washer Autom. blanket wash-up device Low-pile delivery Ultrsonic double-sheet control Stream feeder Plu ...

 
370 x 520 mm (14.5 x 20 ")
OSTEO. 38 million Impr.
Classic Center
Alcolor
Autoplate
Autom. Ink roller washer
Autom. blanket wash-up device
Low-pile delivery
Ultrsonic double-sheet control
Stream feeder
Plus version
Powder sprayer
Available: immediately
 
Price  
    request
125465232 2500

KANG CHYAU INDUSTRY CO. LTD. KMT-55CE for sale
Line for blowing KMT 55 film


2009
45,500 EU?  
  PL   request
125465388 802

HEIDELBERG Heidelberg Printmaster 52 2P for sale


370 x 520 mm (14.5 x 20 ") OSTEO. 18 million Impr. Alcolor CP-Ttronic Autoplate Autom. Ink roller washer Autom. blanket wash-up device Perfecting 1/1 Low-pile delivery Stream feeder Ultrasonic double-shee ...
used machine
 
370 x 520 mm (14.5 x 20 ")
OSTEO. 18 million Impr.
Alcolor
CP-Ttronic
Autoplate
Autom. Ink roller washer
Autom. blanket wash-up device
Perfecting 1/1
Low-pile delivery
Stream feeder
Ultrasonic double-sheet control
Powder sprayer
Available: immediately
2005
Price  
    request
125463393 1513

JLG E400AN Low Hours, Electric, 14.2 m Working Height. for sale
Scissor lifts


; Gross weight [kg]: 5694; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 5694; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 230
2007
14,900 €  
  NL   request
125465354 1102

DEUTZ F4L1011F for sale
Diesel engines


Good running used Deutz engine (diesel) type F4L1011F 40 kW at 2800 rpm We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F4L1011F

40 kW at 2800 rpm

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale
CNC Turning- and Milling Center


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125465352 1102

DEUTZ F2L511 for sale
Diesel engines


Good running used Deutz engine (diesel) type F2L511 We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F2L511

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125460549 1900

WAGNER LEOPARD 35-70 for sale
Piston Pump


Weight approx.: 70 kgDimensions (l x w x h) approx.: 1100 x 900 x 1400 mmDescription: Mobile, with spray guns, pneumatic hoses, technical data: transmission ratio 35:1, volume flow per double stroke 70 cm3/cc, max. opera ...

 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 1100 x 900 x 1400 mm
Description: Mobile, with spray guns, pneumatic hoses, technical data: transmission ratio 35:1, volume flow per double stroke 70 cm3/cc, max. operating overpressure 25 Mpa/ 250 bar, max. possible number of strokes in operation: 60, diameter air inlet internal thread: G 1/2 , see photos for details
 
used machinery auction RESALE 110 €  
  DE   request
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460471 109

VEB VTK for sale
Wheel Blast System


Dimensions (l x w x h) approx.: 15000 x 2800 x 2500 mmDescription: Consisting of a blast cabin with 2 blast wheels diameter 300 and 400 mm, abrasive flow approx. 100 to 200 kg/min., brushing unit for cleaning, abrasive c ...
used machine
 
Dimensions (l x w x h) approx.: 15000 x 2800 x 2500 mm
Description: Consisting of a blast cabin with 2 blast wheels diameter 300 and 400 mm, abrasive flow approx. 100 to 200 kg/min., brushing unit for cleaning, abrasive conveyor and dosing unit, roller conveyor infeed and removal unit
1988
used machinery auction RESALE 3,500 €  
  DE   request
125465348 1102

DEUTZ F2L712 for sale
Diesel engines


Good running used Deutz engine (diesel) type F2L712 We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type F2L712

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125457901 112

MAAG SH 250/300 S for sale
Gear Shaper


max. wheel diameter:3080 mmmin. wheel diameter:200 mmgear width:670 mmgear width:870 (Drehklappe) mmmax. module:50 (Generating-Fräser) max. module:25 (Profilfräser) max. number of teeth:1000 min. number of teeth:12 too ...
used machine
 
max. wheel diameter:3080 mm
min. wheel diameter:200 mm
gear width:670 mm
gear width:870 (Drehklappe) mm
max. module:50 (Generating-Fräser)
max. module:25 (Profilfräser)
max. number of teeth:1000
min. number of teeth:12
tool length - max.:ca. 312 mm
min. ram stroke:70 mm
dividing plate diameter:1116 mm
table bore diameter:420 mm
table travel max.:2 x 460 = 920 mm
ram stroke speed:3,2 - 40 m/min.
max. ram stroke:700 mm
table load:15000 kg
Ram strokes per shifting:8 - 150
depth of hole:1200 mm
max. wheel diameter:3300 (Innenhobeln) mm
max. dia. of teeth cutting:2940 (Innenverzahnung) mm
Distance between head and table:1180 mm
gear width:365 (Innenhobeln) mm
clamping table diameter:1100 mm
helical adjustment of ram:unbeschränkt °
max.helical angle:35 (Drehklappe) °
dimensions of the machine ca.:6550 x 4275 x 3310 mm
power capacity:71 kW
weight of the machine ca.:38000 kg
chip conveyor: 1
Local rim support (swivel head mounted): 1
Local rim support (bed mounted): 1
Internal gear cutting attachment JVS-250: 1
Work base plate Ø1800 mm: 1

The machine is practically new and will be delivered with a precision chart. Cutting quality DIN 7! The main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. The outstanding economy of the MAAG SH 250/300 S derives from the high metal removal rate (for material until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. After the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. And that makes it in most of all cases possible, to avoid grinding. With the full swivel cutter ram, any desired helix angle can be set. The finishing generating operation yields a very good tooth accuracy in short machining time. The machining cycles for the plunge cut and the generating operations take place automatically. The vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. The cutter ram is driven by a DC reversible motor via a 7-start spindle. The machine is equipped with a swivelling cutter holder DS-250. Helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter. When using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced.
1982
Price  
    request
125465344 1102

HATZ 1D60C for sale
Diesel engines


Good running used HATZ engine (diesel) type 1D60C We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used HATZ engine (diesel) type 1D60C

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125457117 102

MORI SEIKI NTX 1000/SZM for sale
CNC Turning- and Milling Center


turning diameter:370 mmturning length:424 mmcontrol:MSX 711 Mapps IV Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °Travel x/z t ...
used machine
 
turning diameter:370 mm
turning length:424 mm
control:MSX 711 Mapps IV
Travel turret No.1 (milling spindle) x/y/z:380 / 210 / 460 (+155) mm
Swivel range Turret No. 1 (milling spindle) B-axis:+-120.000 x 0,001 °
Travel x/z turret 2:155 / 610 mm
Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/50 m/min
Rapid traverse feeds x/z turret 2: m/min
RPM milling spindle:12000 1/min
power capacity - milling spindle:9 / 5,5 kW
Torque of milling spindle:120 / 44 Nm
tool taper milling spindle:Coromant Capto C5
Tool magazine for milling spindle (turret 1):38
Tool change time tool/tool, milling spindle:1,6 s
Turret No.2 stations / rotary tools:10 / 0
Spindle 1 RPM:5000 1/min
Spindle 1 Power:11 / 11 / 7,5 kW
Torque Spindle 1:223/158 Nm
C-axis spindle 1:0,001 °
Bar capacity spindle 1:65 mm
Spindle 2 RPM:6000 1/min
Spindle 2 power:7,5 / 5,5 kW
Torque Spindle 2: Nm
C-axis spindle 2:0,001 °
Parts and total counter:
swing diameter max. over bed cover:730 mm
total power requirement:45 kVA
weight of the machine ca.:8,5 t
dimensions of the machine ca.:6 x 2,7 x 2,4 m
Collet chuck max. ID. spindle 1:Unilock 65 (Hainbuch System) mm
Collet chuck max. ID Spindle 2:Unilock 65 (Hainbuch System) mm
Polygon turning option:
High speed canned cykles for easy programming:
Turret 2 high pressure coolant 20 bar: kW
tool holder:30 x Capte C 5
tool holder:9 x for lower turret
Chip conveyor:
tool setting:
spindle load monitor:
Airblow system:
Interface for coolant through the spindle:
Coolant through spindle 70 bar with filter:SEI International
Coolant cooling system:
Parts catcher:Subspindle
Conveyor for partsdisposal:
Parts and total counter:
Ethernet I/P Interface:
Signal lamp 3 colors:
Barfeeder Interface:
Bar feeder magazine:TOP Automazioni X-Files S 365 P
Spindle 1 Chuck:Kitagawa BB208
Spindle 2 Chuck:Kitagawa B 208
Air Filter:
Hobbing option:
Linear scale x1,y1 and z1-axis:

High performance turning and milling center with multi axis milling head, 38 tool magazine Capto C5, additional lower turret with 10 rotary tool stations, main- and sub spindle, and multi layer bar feeder magazine TOP Automationi X_Files S 365 P for bar diameter of max. 65 mm. The machine is almost as new with about 4500 power on hrs.
2015
Price  
    request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125456663 702

HOBART Planetenrührmaschine max. 60 l for sale
planetary-mixer, Hobart, H 600


4 speeds\r\nbowl lifting and lowering manual \r\naccessories: 1 bowls 60 l stainless steel \r\n 1 beater/whip \r\n 1 doughhook\r\nsafety-rack against surcharge available

 
4 speeds\r\nbowl lifting and lowering manual \r\naccessories: 1 bowls 60 l stainless steel \r\n 1 beater/whip \r\n 1 doughhook\r\nsafety-rack against surcharge available
 
Price  
    request
125465339 1102

DEUTZ BF4L914 for sale
Diesel engines


Good running used Deutz engine (diesel) type BF4L914 71 kW at 260 rpm We have a wide range of new and used engines in stock. Please do not hesitate to contact US for pricing or availability.
used machine
 
Good running used Deutz engine (diesel) type BF4L914

71 kW at 260 rpm

We have a wide range of new and used engines in stock.
Please do not hesitate to contact US for pricing or availability.
 
Price  
    request
125456927 702

DIOSNA Planetenrührmaschine, Diosna for sale
planetary-mixer, fabr. Diosna, type PL 80


3 speeds, bowl max. 80 l\r\nvariabel speed, saftey device,\r\nbowl lifting and lowering by electric \r\naccessories: 1 bowl 80 l stainless steel\r\n 1 trolley for the bowl\r\n 1 whip  ...

 
3 speeds, bowl max. 80 l\r\nvariabel speed, saftey device,\r\nbowl lifting and lowering by electric \r\naccessories: 1 bowl 80 l stainless steel\r\n 1 trolley for the bowl\r\n 1 whip \r\n 1 doughhook\r\n 1 flatbeater\r\n 1 timer\r\n 1 safety device
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Injection molding machines sumitomo japan ( electirc SE130EV-C360HP


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI OF GNB IN KOREA

Self-Cleaning Disc Separator Alfa-Laval BRPX 617


Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties CONTROL Cabinet available

bending pipe tube profile machine Tauring Delta 60 I CNC


production year 2011, 2012 first launch, new, maybe 5 hours the rolls were made to order for a special profiles from PVC/alluminium, there are no standard rolls on offer. The machine was bought with the appropriate rolls but it turned out that they are not suitable for a PVC/all. profiles for window joinery. abc.tauringroup.com/sites/default/files/delta60_low_0.pdf

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Wheel loaders HSW 515 G


Loader HSW 515 G was built by Ironworks Stalowa Wola in 2009 year. HSW-specific data 515 G: -mileage: 30.000 mTh (hours) -engine: Cummins-after overhaul -weight-tires Good Year RL-5 k

Concrete block making machines Prometal RHP 500


With RHP 500 concrete products machines we provide excellent medium level entry solution, and also long term solution for many customers. These machines combine durable, heavy duty construction with possibility for assembly various concrete product lines - from simple to fully automatized. Production of high quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks etc... RHP 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Horizontal Band Saw MEBA 407 A


Clamping surface diameter: 390mm, saw band length: 5120mm, cutting speed: 15-150m/min, clamping height: 10-407mm, clamping width: 10-407mm, cutting range: 407x407mm, cutting range round: 407mm, lowering speed: 0-300mm/min, length: 1400mm, width: 2500mm, height: 2000mm, weight: 3.5t.

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Refrigerating machines Eco refrigerazione IDE 43B10 ED


Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Bucharest, Romania/Bucharest (RO) Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

gabion mesh production line HEBEI FAKTORY 60X80 / 4300


Line for manufacturing of grid gabionowej HEBEI ANPING WIRE MESH MACHINE FACTORY 60 x 80/4300 was built in the year 2013. Machine for manufacturing of grid gabionowej, hexagonalnej with the following parameters: -manufacturer: Hebei Anping Wire Mesh Machine Factory (China)-the size of the meshes: 60 x 80 mm -maximum width of mesh produced: 4300 mm -wire diameter: 2.0-2.8 mm -capacity: up to 2.5 mb/min. -weight: 18 tons -engine power: 22 kW

PRESSA PER PRESSOFUSIONE MAICO


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Die-Sinking Spark Erosion Machine Tools BAOMA DK 7732


An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes. Technical parameters of EDM BAOMA DK7732 E: -working table range: 320 x 400 mm -maximum cutting height: 500 mm -the maximum taper angle: 60 degrees/100 mm -the diameter of the electrode a: 0.14 – 0.22 mm -maximum capacity: 100 mm/min. -the smallest jump interplolacji: 0.001 mm -luz reversible screws of working table: 0.002 mm -positioning accuracy: 0.03 mm over a length of 500 mm -maximum weight of workpiece: 600 kg -power consumption: 2 KVA -external dimensions: 1340 x 1870 x 1670 mm -machine weight: 1800 kg -power supply: 3 x 380V 50 HZ

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

End Milling Machines Graule, Elumatec 2015


Notching saw AKS 134/65, Graule ASP650 NC Machine is motorized 4 axis controlled and the saws diameter is 650x500mm Description High-performance notching saw for aluminium profiles offering an exceptionally large cutting range For demanding applications in the areas of curtain wall construction, conservatories and special designs Machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements Clamping of several profiles is possible due to the wide stop plate Support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Minimum-volume lubrication system for saw blades Technical specifications Lower saw unit (vertical): Saw blade diameter 650 mm Tilting angle max. 45° towards front and 55° towards back, home position: Saw blade vertical Max. cutting height of 260 mm at 90° Max. cutting height of 187 mm at 135° Max. cutting height of 130 mm at 30° Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 1,400 rpm Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting angle max. 55° downwards and 60° upwards, home position: Saw blade horizontal Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz 3 kW of power with motor brake Saw blade speed 2,710 rpm Travel 950 mm Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position, 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

STAINLESS STEEL WIRE DRAWING MACHINE SUMITOMO 5.5 - 1.2 MM DIA.


Qty. 1 Second-hand stainless steel wire drawing machine Mfc.: Sumitomo(Japan) Built: 1996 Wire dia.: 5.5 mm ~1.2 mm Stainless Steel wire drawing machine Material: SUS304, SUS440, SUS303Cu Inlet: Stainless steel dia. 5.5 mm (In case tension strength: 70 kg/mm2 below) Outlet diameter: Minimum 1.2 mm (In case tension strength: 230 kg/mm2 below) Inlet speed: Max.100 m/min Outlet speed: Max. 1200 m/min Finishing Precision: plus/ minus 0.02 mm Product capacity: Max. 1120 kg/hr Stands: dia.130 mm x13 stands+dia.80 mm x19 stands=32 stands

PRESSA PER PRESSOFUSIONE MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from hours 8:30 at 13:00 and 14:00 at 19:00

Sheet-metal-stamping trimming press Voronezh KV2536,400T


Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Eccentric Presses STANKOIMPORT KD 2330


Eccentric press STANKOIMPORT KD 2330 was built in 1980. Characteristics of the press STANKOIMPORT KD 2330: -nominal pressure: 100 t -table dimensions: 850 x 560 mm -adjustable slider stroke: 10-130 mm -the number of jumps the slider: 95/min -adjust the distance between the table and the slider: 10 mm -the maximum distance between the table and the slider in the lower position the slider at the maximum stroke: 400 mm -the distance from the axis of the slider to the press corps: 320 mm -distance from the press table to guides: 550 mm -the distance between the uprights in clearance: 400 mm -the angle of the body: 10 degrees, 20 degrees, 30 degrees -dimensions of the machine: 1745 x 2360 x 3180 mm -weight: 8650 kg

Frozen meat grinders GEA Powergrind 280


The GEA PowerGrind 280 is a powerful industrial grinder for fresh and frozen goods, which minimizes dust and fines, and manages the meat up to-25 ° C. There is less dust and fines, and not suiffage. The great feeding area minimizes the risk of formation of arch and allows loading the machine with up to 10 standard meat blocks (30 kg) of a sudden The machine comes with a reducer in advance, a screw of new grinding, many grills and knives.

H-Frame Crank Presses PKrR 200/2


Crank press PKrR framework 200/2 pressure 200 tons was built in 1971 by Zamech-. Technical data of the press PKrR 200/2: -nominal pressure: 200 ton-clearance between uprights: 2000 mm-pitch slider: 200 mm-number of jumps: 23, 27, 32 l/min. -distance from the table slider closed (closed is the distance slider from the table in the lower turning position and first engages a): 630 mm-nastwano?? slider: 150 mm-length: 1000 mm-length slider: 900 mm-hole in the table: 1600 x 600 mm-gr ubo??: interface plate 150 mm-width Windows in the rack: 400 mm-the air pressure in the clutch: 3 atn. -odci??aczach air pressure: 5 bar -intake air when jumping individual: 0.035 Nm3/sk. -maximum number of inclusions in the clutch to intermittent traffic: 12 l/min. -main motor power: 22 kW-RPM main motor: 1500 l/min. -engine power to set the slider: 3 kW-engine speed to set the slider: 1500 l/min. -string device, wypych.: 10 t-string device, the power of przytrz: 40 t-string, stroke: 125 mm -maximum air pressure in the device pass design: 6 atn. -the weight of the tool ci?gowego: 2020 kG -the weight of the press without pads: 30580 kG -overall dimensions of the machine (w x l x h): 3100 x 2150 x 5600 mm

Eccentric Presses ZAMECH PMS 160 A


Eccentric press ZAMECH PMS 160 and produced in 1965 by Zamech-. Characteristics of the press PMS 160 and: -nominal pressure: 160 t -table dimensions: 1140 x 760 mm -thickness: 125 mm -the diameter of the hole in the table: 490/450 mm-diameter hole in the plate: 250 mm -diameter of the socket in a slider: 50 mm -the ground clearance between the walls of the body: 840 mm -adjustable slider jump in gran. : 20-140 mm -the nominal quantity: 40 1/min -outreach to table height: 400 mm -the largest distance between the table and the slider, with the largest jump the slider in the upper position and first engages a: 580 mm -the distance between the table and the guides: 585 mm -the self-alignment capacity of slider in the direction of the axis: 120 mm -electric motor: main: 10 kW, for setting the slider: 1.1 kW -the turnover of the main electric motor: 1420 RPM -the power of air pressure ejector 5.4 atm.: 16000 kG -the biggest jump ejector: 75 mm -indicative cooling air flow: 1.3 Nm3/min -the air pressure in the odci??aczach: 4.8 atm. -maximum air pressure in wyrzutniku: 5.7 atm. -nominal air pressure in the clutch: 4.5 atm. -the weight of the ejector: ok. 400 kg -the weight of the press without ejector: ok. 14100 kg -overall dimensions: 2000 x 2325 x 3390 mm

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Transfer Presses ( 2 - 4 Columns) KRUPP PST-A 160


Transfer press KRUPP PST-and 160 built in 1980. Technical data of the press KRUPP PST-and 160: -nominal pressure: 160 tons -cutting force degree 1:400 KN -clamping force between uprights: 1200 KN -the number of stages including the cutting level: 11 -the distance between uprights: 200 mm -pitch slider: 210 mm -drawing depth: 70 mm -the amount of jumping, infinitely adjustable: 15-75/min. -production range jumping from repeatability of its settings: 25-75/min. -number of jumping motion Setup: 15-25/min. -wykorzystywalny resource work per stroke in terms of 25-75 strokes per min.: 20000 J -maximum load single degree: 500 KN -the maximum load of a single degree by using the inserts: 630 KN -the maximum tape width: ok. 340 mm -the maximum cut-out diameter: 120 mm -the minimum cut-out diameter: 30 mm -the distance between uprights: 2450 mm -the height of the built-in tools in the lower position of the slider and its regulations (the space between the table and the imakami of the upper toolbar): 470 mm -the height of the surface transport extrusions over a dining table: 270 mm -height adjustment tool blocks: 40 mm -table clamping surface (width x depth): 2000 x 700 mm -adjustable spacing between the slats podajacymi: 210 +-300 mm -stroke closing slats which indicate for each terminal: 75 mm The progressive press wielooperacyjna KRUPP PST-and 160/11/200/210 is connected and can be checked on the move.

Autoclaves BARRIQUAND Steriflow


CNC Turning Machines DOOSAN PUMA 240 MB CNC


CNC lathe DOOSAN PUMA 240 MB produced in 2007 year in Korea. The machine is equipped with a FANUC Series 21i-TB. Cnc lathe allows for effective machining, which allows you to save time and gain accuracy. CNC lathe-specific data DOOSAN PUMA 240 MB: -number of tools: 12 PCs. -the number of driven tools: 2 PCs. -spindle: 65 mm -stroke x axis: 205 mm -stroke y axis: 580 mm -diameter of the handle: 225 mm -rated power: 28.95 kVA -weight: 4140 kg -hydraulic Chuck -horse -four-bed

Self-Cleaning Disc Separators Alfa-Laval BRPS 617


Stainless steel construction. Max bowl speed 4900RPM, . Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties 37KW DRIVE MOTOR , BELT DRIVE ELECTRICAL CABINET AVAILABLE

CNC Bending Presses LVD PPBL 200/30


Press brake LVD PPBL 200/30 manufactured in 2000. The machine allows you to fold items on length 3100 mm with the force 200 tons. Control and control cabinet have been completely upgraded in November 2017 (on work carried a guarantee). Early upgrades carried out the company HARTMANN from Germany. Technical data of the press LVD PPBL 200/30: -pressure capacity: 200 tons -bending length: 3100 mm -distance: 160 mm -maximum pressure: 300 bar -power: 11 kW -machine weight: 11200 kg -menu machine and manual work: in Polish language -a complete wiring diagram

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

Eccentric Presses BZMP KE 2130


Eccentric press BZMP KE 2130 100 TONNES built 1986 year. The parameters of the technicznbe press BZMP KE 2130 100 TONNES: -nominal pressure: 100 tons -the maximum slider stroke: 130 mm-minimum pitch slider: 10 mm -the number of jumps the slider continuous: 100/min -the number of strokes a slider sweeps: 45/min -the size of the jump to its lower position, which corresponds to the nominal pressure-continuous movements: 2.5 mm -the size of the jump to its lower position, which corresponds to the nominal pressure-sweeps: 5.0 mm -table dimensions: 950 x 630 mm -the maximum distance between the table and the slider in the bottom position at maximum stroke: 400 mm -the distance between the uprights of the body (clearance): 400 mm -the size of the adjustment of the distance between the table and the slider: 100 mm -main engine power: 9 kW -dimensions: 2660 x 2380 x 970 mm -weight: 9500 kg

Refrigeration Dryer DONALDSON Ultrafilter SD 1175 AP


Volume flow: 19.58m³/min, pressure drop: 0.29bar, cooling output: 2600m³ air/h, length: 800mm, width: 900mm, height: 1230mm, weight: 180kg.

Compressor WITTIG ROL 65


Discharge pressure: 9bar, suction pressure: 1000nbar, volume flow: 315m³/h, shaft power: 35kW, motor power: 37kW, rotational speed: 1475/min, number of available compressors: 2.

One-sided edgebander Jaroma DCKG JAROMA DCKG


UNIVERSAL JAROMA DCKG edbander WITH PREMILLS Jarome producer Model / machine type DCKG Year of production 2007 Machine category. One-sided edgebander Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments The GCKG edgebander is designed for unilateral banding of narrow furniture elements. In addition, the edge bander allows you to perform basic machining operations such as: - cutting off the periphery at the front and the back of the element AND THE PRELIMINARY MILLING OF THE FIRST TWO CUTTING STATION - milling excess edging height - removal of the corrugated surface created during milling (scraping) of the edges of PVC and ABS - milling (rounding) corners - smoothing (polishing) the machined edges The natural and plastic edgings that can be used for processing include: standotron, veneer, PVC / ABS tape with a maximum thickness of 3 mm, wood elements with a maximum thickness of 5 mm (when machining wood attachments, cutters are not used to round the corners) .

Plate And Section Shears KRASSER CENTURIO


Slitting line sheet KRASSER CENTURIO. The individual elements of the lines were built in the years 2008-2011. Thickness to 1.25 mm, the width of the circle to 1.25 m. The line KRASSER: CENTURIO 1. Automatic storage for 6 coils + 1 cargo station (producer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 2. the cutting and cutting-controlled CNC, automatic adjustment of the width and depth of the blade (manufacturer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 3. to set the Table in a stack of 3 m long with automatic lowering (useful when cutting pattern) (2011) 4. compensatory Tower with 2 pneumatic stations (2008) 5. the positioning to the scroll process coils (2008) 6. Cover 12 t with sliding guides to automate movement when scrolling through the coils (2008)

Reflow Soldering Oven SMT Quattro Peak C 3.0 N2


Number of zones: 6 2, work direction: left to right, connected load: 41kW, was overhauled in 2012.

Plate Heat Exchanger Clip 8-RM Alfa Laval flow heat exchanger


Plate heat exchanger Clip 8-RM Alfa Laval, 1999 Flow heat exchanger Alfa Laval model Clip 8-RM. Worked on beer cooling. Full set of equipment – thermoexchanger , flow control valves, temperature sensors, pump, control unit etc. The equipment is mounted on the frame. The main characteristics: Working temperature – 110 °?. Working pressure – 10 bar. max. 13 bar. Capacity – 102.2 l.

Liquid CO2 Storage Tank 47 m3 E&P Hinke, Hungary with two compressors


Liquid CO2 storage tank 47 m3 with cooling compressors Horizontal storage tank for liquid CO2 with two Bitzer made cooling compressors, valves and pipes. Tank is made of steel and insulated in year 2001 and compressors were changed in year 2013 to Bitzer piston compressor operating with freon R-404A. Technical data Tank manufacturer Hungarian E&P Hinke Manufacturing year 2001 Tank volume 47 m3 Tank empty weight 12800 kg Compressors 2 x Bitzer 4NES-14Y-40 P Refrigerant R-404-A, 10 kg/compressor Compressor year both made in 2013 Ref. flow rate 56.3 m3/h in 50 Hz and 67.9 m3/h in 60 Hz system

Water Deaeration Plant ALDOX 100 hl Alfa Laval with Pasteurization


Water Deaeration Plant ALDOX 100 HL with Pasteurization Hot deaeration plant ALDOX made by Alfa Laval in year 1995 is designed for produce air free, deaerated water for brewing. This DAW plant has also tube pasteurizer for sterile water and DAW tank of 10 m3. Aldox Plant is fully automatic, self-contained, ready for operation and it is connected to a general CIP. This deaeration technology results in exceptionally efficient oxygen removal, with very low gas consumption. 95% or more of the stripping gas entering the column is dissolved into the water, which reduces the need for additional carbonation of products such as high-gravity blended beer. The virtually oxygen-free water that Aldox column removes the oxygen from the incoming water, which is routed via the liquid distributor at the top of the column. The high desorption of oxygen is achieved by using carbon dioxide as the stripping gas over a packed bed, at atmospheric pressure. Water is routed via the liquid distributor to the top of the column and travels downward countercurrent with the CO2 / N2 . Aldox systems enable you to keep oxygen levels down to as little as 0,02 ppm. Equipment in good condition and ready to delivery. Technical specifications: Manufacturer: Alfa Laval Manufacturer year: 1995 Type: ALDOX – SPD 100 HL Capacity: 1 – 100 hl/h Residual oxygen content: 0,02 ppm Inlet water temperature: 10 – 20 0C PLC: Alfa Laval SattCon05 Condition: Good Condition List of equipment: Deaeration column Heat Exchanger (0/6 bar – 50/130 0C) Tube pasteurizer DAW tank volume 10.2 m3 Control cabinet Piping, valves, pumps, etc.

Water Deaeration Plant ALDOX 120 hl Alfa Laval with Pasteurization


Water Deaeration Plant ALDOX 120 HL with Pasteurization Hot deaeration plant ALDOX made by Alfa Laval in year 2000 is designed for produce air free, deaerated water for brewing. This DAW plant has also tube pasteurizer for sterile water. Aldox Plant is fully automatic, self-contained, ready for operation and it is connected to a general CIP. This deaeration technology results in exceptionally efficient oxygen removal, with very low gas consumption. 95% or more of the stripping gas entering the column is dissolved into the water, which reduces the need for additional carbonation of products such as high-gravity blended beer. The virtually oxygen-free water that Aldox column removes the oxygen from the incoming water, which is routed via the liquid distributor at the top of the column. The high desorption of oxygen is achieved by using carbon dioxide as the stripping gas over a packed bed, at atmospheric pressure. Water is routed via the liquid distributor to the top of the column and travels downward countercurrent with the CO2 / N2 . Aldox systems enable you to keep oxygen levels down to as little as 0,02 ppm. Equipment in good condition and ready to delivery. Technical specifications: Manufacturer: Alfa Laval Manufacturer year: 2000 Type: ALDOX – SPD 120 HL Capacity: 1 – 120 hl/h Residual oxygen content: 0,02 ppm Inlet water temperature: 10 – 20 0C PLC: Siemens Simatic S7 Condition: Good Condition List of equipment: Deaeration column Heat Exchanger (0/6 bar – 50/130 0C) Tube pasteurizer Control cabinet Piping, valves, pumps, etc.

Air Compressor Atlas Copco ZR 315 VSD bar, 50.2 m3/min Variable Speed Drive, 255 kW


Air Compressor Atlas Copco ZR 315 VSD The compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. This compressor has energy saving speed control (VSD) for airflow airflow and it has been manufactured by Atlas Copco Belgium in year 2007. The equipment is a sound canopy and it is controlled with advanced Eletronikon 4 control system. The unit is still installed and in good condition. Technical data Manufactured by: Atlas Copco Belgium Type compressor: ZR 315 VSD Made in year: 2007 Estimated operation hours: 43000 Capacity (FAD): 50.2 m3/min at 8.6 bar Electric motor: 255 kW Shaft speed: 2430 rpm Main dimensions compressor: W x H x L 3.15 x 2.00 x 1.65 m Weight compressor: 4710 kg

PET Bottle Filling Line 36000 bph KHS Innofill, GEA, SIG cabonated and non-carbonated


PET Bottle Filling Line for carbonated or non-carbonated beverages 36000 bph This is a complete blow molding, filling and packaging line for carbonated or non-carbonated beverages having a capacity of 3 500ml with 28mm caps featuring KHS Rinser-Filler-Capper and Paramix Carbonating Blending Skid The heart of this line, the KHS Innofill PET Rinser-Filler-Capper relies on computer-controlled precision technology for careful and accurate filling of your carbonated and still beverages in PET bottles. Using volumetric filling, you can fill bottles to exact fill levels at high speeds with both lightweight and premium PET bottles. This Innofill PET DRV operates as a triblock machine, with a bottle rinser and capping turret. Short times for product and bottle changeovers reduce product losses and improve efficiencies. The KHS Paramix CMX Blending Carbonating System Is suitable for preparing fruit juices, juice beverages, carbonating mineral water and soft drinks allowing for clean, foam-free filling and excellent water deaeration

Aseptic Filling Line for PET Bottles 36000 bph GEA Procomac for non-carbonated beverages


Aseptic Filling Line for PET Bottles, GEA Procomac 36000 bph This is a complete ASEPTIC filling line for non-carbonated beverages 36000 bph in 500ml PET bottles, 38mm caps. Line is still running but must be dismantled in end of June 2018. Line is complete line with blow molding, aseptic filling & capping and packaging disinfection for juices, beverages, and ice tea. Full Aseptic parasitic acid and hydrogen peroxide sterilization. Equipment is in very good condition. The complete system consists of the following modules: -SIG 20 Cavity PET Reheat Stretch Blow Molder Corpoplast Blomax 20, 2007 -GEA Procomac disinfection using parasitic acid and hydrogen peroxide -GEA Plastic caps sterilizing system -GEA Procomac Dual Rotary PET Bottle Rinsers IR80.113, 80 Station Water Rinse, 2006 -GEA Procomac Rotary PET Bottle Sterilizer IR85.113, Dual 50 Station, Mfg’d year 2006 -GEA Procomac PET Bottle Filler FILLSTAR FX PET2 / 70.20.113, 70 Valve, year 2006 -GEA CIP / SIP Station -Tetra Pak Pasteurizer skid -Ancillary tanks and process equipment

blow transfer header MALMEDIE K-64 Malmedie K-64


4 die – 4 blow transfer header 1981 diameter range: 16-30 mm cutting length:235 mm
Find used machinery dealers in your country