low used for sale

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

Brand: Lisec Type: Washing machine, Vertical Model: VHW-25 V8 Serial Number: 315-051324 Construction year: 2009 Weight: 4,855 tons Power: 63 KvA Air pressure: 6 Bar Waterpressure: 2,5 Bar Length mm: 7750 (3,25+ 3,50+ 1,10) Width mm: 2000 Height mm: 3550 Working height: +/- 530 Transport size: L x W x H: Low loader or in consultation Min.-max. glass thickness: 3-25 mm Min.-max glass size: max. 2500 x 300 Number of brushes: 8 brushes Condition machine : Very good condition Control type: B&R Electric. Connection: 400 + N Documentation: Can be requested from Lisec Instructions: Can be requested from Lisec Electric diagram: Yes Parts list: Can be requested from Lisec Available software: Back up available Photos/film available: Photo's and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting ta ...

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...

✓ Year of manufacture December 2015 ✓ First installation June 2016 ✓ Impression Counter: 44.7 million impressions (status from yesterday) ✓ 7 colours authorized and installed ✓ Unwinder with max. roll diameter of 800 mm ✓ Priming Unit and Corona Treatment Unit ✓ Rewinder with max. roll diameter of 800 mm ✓ Blanket Automated Replacement System (BARS) ✓ OFIR Kit ✓ PUW Anilox Sleeve High Laydown 3.36 BCM ✓ PUW Anilox Sleeve Low Laydown 2.5 BCM ✓ PUW Rubber Sleeve ✓ Reverse Inspection Bridge (RIB) ✓ Slitting option ✓ HP SmartStream Labels & Packaging Print Server GEN9 ✓ ESKO Version 5.2.3 ✓ HP Authorized Software Version 1.0081.0.0.135 ✓ Machine comes without Chiller Unit ✓ Machine is technically in good condition ✓ Machine is still in HP Service Contract Technical Specifiations: Printing speed: Up to 34 m/min CMYK | Up to 26 m/mi ...

Used WAGNER Flexcontrol Plus mixing and dosing system control Electronic 2K mixing plant for high and low pressure requirements. For solvent paint 2K, 3K and 4K varnishes and adhesives Water-based 2K, 3K and 4K paints and adhesives With operating instructions Comes from company dissolution Functioning Original price of the controller approx. 8000.-Euro Good condition.Inspection and pick-up possible. Shipping Germany (without islands) 100,00 Euro net Sale to traders without warranty The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

Hartford Omikron 1020 cnc vertical machining center Number of working hours is very low Machine is in good condition

Description Piab 6010A vacuum pump replaces conventional compressors up to a size of 100m3. The patented vacuum pump is a smaller, more effective and reliable solution for vacuum generation. It is easy to install and can be adapted to your specific application requirements. Because the pump contains no moving parts, there is virtually no wear. In addition, no heat is generated, which avoids the static charge of the paper. Further advantages are the compact dimensions, the quiet operation and the low energy consumption. System completely pre-assembled. The pump always consists of a blown air and a vacuum side. Since the performance is individually adjustable, any compressor size can be replaced with a Piab vacuum pump.

Very good condition. Complete with chip scraper, driven tool, C-axis Low runtime (23520h) Technical data Swing over the bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm Number of tools: 12 Hole: 72mm Tailstock quill diameter: 72 mm Tailstock sleeve stroke: 100 mm Total power requirement: 45KVA

for sale kasto pbs 800 hacksaw overhauled by the parent company, low voltage controls, works very well.

Gas cutter with low mileage It was dismantled by Eckert

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Specifications: Clamping force: 1100 kN Clamping plate: 745 x 770 mm Installation height: 300 mm Panel spacing: 900 mm Screen text: German Control: MC4 Spray side Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Dimensions: 4.30 x 1.50 x 2.20 m Pump drive power: 18.5 kW Oil filling: 345 l Total weight: 5,8 to Paintwork: RAL 9002/5002 Other: 3-fold core pull, air valve 1-fold, ejector plate protection, tool hot channel 6-fold, pressure accumulator, low-wear plasticization, water battery 8-fold, Euromap 12 interface, machine shoes, complete documentation

3 head band saw electric motors 3x 5.5 kW feed motor 4.0 kW max cutting width/height 30.5 cm Low mileage new track

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all machines in the range, the Elixa 35 is a compact stretch packaging machine developed by the Fabbri Group specifically for particularly small workspaces and retail stores. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market and achieves unparalleled packaging aesthetics.  ...

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

cutting diameter: 250 mm saw band length: 2950 mm table height: -- mm : 280 mm : 2950 x 27 x 0,9 mm : 280 x 200 mm : 230 mm : 190 mm : 180 x 180 mm : 180 mm : 120 mm : 110 x 110 mm : 110 mm : 36 / 72 m/min : 1,5 / 1,8 kW powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and m ...

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1 t clamping width: 810 mm total power requirement: kW Colour: 5010 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors maneuver. The transport can be carried out with low rolling resistance will. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.XD7 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² //  ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/ ...

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made  ...

cutting diameter: 300 mm saw band length: 3320 mm table height: -- mm : 330 mm : 40 / 80 m/min : 3440 x 27 x 0,9 mm : 280 mm : 260 mm : 380 x 260 mm : li 260 mm : li 250 mm : li 300 x 200 mm : re 200 mm : re 180 mm : re 230 x 160 mm : 180 mm : 170 mm : 200 x 170 mm : 870 mm : 1,5/1,8 kW : 0,7 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large  ...

Hobart CNA-E Basket Flow Machine Manufacturer: Hobart Model No.: CNA-E  Type: Basket Flow Machine 25.10 kW 380-415V/50 Hz/3/ N Year of construction: 2007 Serial No.: 86463499 HOBART Heat Pump Type: CHP 18 Serial number: 002 Article number: 75869 Year of construction: 2007 Refrigerant type: R134a (capacity 3.2 kg) Maximum pressure: high-pressure side 28 bar Maximum pressure: Low pressure side 8 bar Compressor: max. flow rate 17m3/h Speed: 2,900 rpm With high-performance pre-wash zone as well as wash, rinse and dry zone Made of high-quality stainless steel Electronic control SMARTRONIC With 2 speeds Emergency stop button and main switch Efficient double flushing system Built-in "autotimer" system with automatic shut-off when no baskets are detected Emptying the machine at the push of a button Constant filtration of the water in the pre-wash and washing area b ...

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm : 2950 x 27 x 0,9 mm : 285 mm : 36 / 72 m/min : 250 mm : 220 mm : 280 x 220 mm : 120 mm : 140 x 80 mm : 80 mm : 200 mm : links 220 x 200 / rechts mm : links 200 / rechts 170 mm : 1,86 kW : 0,4 t : 1,8 x 1,3 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with  ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...

cutting diameter: 180 mm saw band length: 2130 mm cutting width: 200 mm dimensions of saw-band: 2130 x 20 x 0,9 mm : 200 mm band speed: 40/80 m/min capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: flat: 125 x 110 mm capacity 45 degrees: square: 110 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,4 x 0,9 x 1,6 m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via co ...

Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...

cutting diameter: 225 mm saw band length: 2450 mm table height: mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x 0,9 mm area output: 240 mm band speed: 46/92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 155 x 115 mm capacity 45 degrees: square: 140 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 90 x 90 mm capacity 60 degrees: square: 90 mm total power requirement: 1,4 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC  ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm : 40 / 80 m/min : 3650 x 27 x 0,9 mm : 300 mm : 260 mm : 330 x 260 mm : 260 mm : 250 mm : 270 x 200 mm : 180 mm : 170 mm : 170 x 170 mm : 870 mm : 2,35 kW : 0,7 t : 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically  ...

We are pleased to introduce our latest range of medium voltage oil transformers from the renowned German manufacturer Energeks GmbH, specially designed to meet the diverse requirements of the European energy and electrical sector. Product Highlights: Nominal power: 2000 kVA High voltage level (Gn): 20 kV Low voltage level (Dn): 420 V Adjustable control: ±2x2.5% Compliance & Certification: Fully certified and in line with the latest EU industry and safety standards. Protection Features: Equipped with comprehensive hermetic protection and a full range of displays, ensuring exceptional durability and consistent reliability. Warranty Service: Offers an extensive 5-year warranty from the date of activation, giving you peace of mind and protecting your investment. Optimal areas of application: Renewable energy systems: Ideal for the efficient conversion and distribution of ren ...

Voss 04E62221S-03 Commercial kitchen stove The range of VOSS appliances is specially designed for daily use in commercial kitchens. The heavy-duty version with the stable construction is made entirely of chrome-nickel steel, as are the interior and exterior panels. Branded device with a long service life! Ideal for use in catering establishments, canteens or hospitals! Properties - Solid industrial design - Self-supporting device body made of stainless steel - High efficiency/low energy consumption -Digital control - Power 24 kW External dimensions Width: 122 cm Depth: 90 cm Height: 75 cm Scope of supply: 1x Voss 04E62221S-03 commercial kitchen stove (partly without side panel because they were in the composite)  More items - new and used - can be found in our shop! International shipping costs on request!

cutting diameter: 225 mm saw band length: 2450 mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x ,09 mm band speed: 46 / 92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: li. 160 / re. 145 mm capacity 45 degrees: flat: li. 140 / re.125 mm capacity 45 degrees: square: li. 155 x 115 / re. 150 x mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm motor: 0,7 / 0,81 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 1,2 x 1,1 x 1,5 m Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutti ...

Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F version Performance data in R404A Condensing Block: The refrigerant-carrying core tubes are relieved by the patented support tube construction. This results in increased protection against leakage. Copper tube ∅ 12 mm, 50 x 25 mm offset Aluminium slats, spacing 2.4 mm Distribution and manifold pipes as well as pipe connections in copper Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Ventilators: Low-noise axial fans with maintenance-free motors with protection class IP54, three-phase 400/3/50, according to DIN 40050 Execution: Insulating material class F Permissible conveying temperature -30 to +55°C All three-phase fans are generally equipped with 2 speeds (∆-Y switching) as well as speed-adjustable by means of Güntner control devices  ...

Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

This Gimret UHT system is a continuous installation for sterilizing by heating, to ensure that a prepared liquid mixture is free from bacterial endospores, the mixture is passed through a sterilizer prior to the drying process. To obtain a continuous flow in the sterilizer, the material is first accommodated in a buffer tank from which the sterilizer is fed by using a dosing pump (low pressure). To kill the bacterial endospores a temperature of at least 135°C is required for a period of 5-7 seconds. To reach this temperature, steam is injected into the mixture that is dosed from the dosing pump. A meandering pipe works then realizes the required residence time at a set temperature of minimum 135°C.

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Trane RTUD110 chiller water chiller with a cooling capacity of approx. 400 kW | ChillerTech - Used chillers Basic information: -Manufacturer: Trane -Model: RTUD 110 -Cooling capacity: 419 kW at 12/7 oC at outside temperature 35 oC -The refrigerant used, as well as its quantity: R134A / circuit A – --- kg / circuit B – --- kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: 2011 -Connection pipes: 5" flange connection – DN125 -Operating range: -15 oC to 45 oC -Number and type of compressors: 2 pcs. semi-hermetic screw compressor -Additional information: low noise version -Dimensions: width – 3230 mm; length – 1070 mm; height – 1960 mm -Weight: 2600 kg The device is available immediately! Check out our other devices...

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

Uras 3 Head Printer Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi 3 heads: 1800mm Thanks to the high-speed printhead with new technology, you will achieve high-performance results at low production costs at a speed of 110 m²/hour in 2Pass print mode. 3 x 4720/3200i printheads with 2400 dpi high resolution 2-stage ink unit (220 ml ink cartridge and 1.5 l ink tank) Housing-integrated heater & infrared heater & fan system Unwinding spindle to avoid paper bubbles Printing up to 600 meters with tension winding system 2pass (360x1200 dpi) 110 m²/hour Specifications Printhead: Piezo printhead 3 pieces (3200i/4720) Media: Width: 1820mm Thickness: 1 mm or less Weight: up to 60kg Maximum print width: 1800mm Colour unit: 4 x 220 ml cartridge and 1.5 Lt colour tank Print resolution: 2400 dpi Print Modes: 2 passes (360 x 1200 dpi) 110 m²/h 3 passes (360 ...

There are 2 motors of it. One was the spare engine! Motor low runtime. 1 hour per day every 4 days for testing purposes. Engine overhaul 2009. Electrodes little worn. See photo nameplate for 6000V, 50 Hz, power 1000kW, 1480 1/min. V=595 / A=1020