low used for sale

If you are interested, please write

Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:

S.No.: 033001 Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

We offer Doka lowering heads H20, used in Doka rental warehouse quality with 73% discount on the new price! Original price: 47,20€ net Special net price: 12,80€ net If desired, in a Doka reusable container 1.20 x 0.80m at a price of €190.00 net. Packaging unit: 40 pieces in a reusable container. Technical information Weight: 6.1 kg Length: 25 cm Width: 20 cm Height: 38 cm Surface : Galvanized If you have any questions, please call 0176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer 76 x Doka lowering head, gebr. á 13,50€ net 75 x Doka fork head, gebr. á 11,50€ net 4 x Doka reusable containers, gebr. á 85,00€ net If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279

AS interface lower part -Lower part with addressing socket -for connection to flat cable -Number: 18 pieces available -Minimum purchase 2 pieces -Price per piece

AS-Interface lower section -Lower part with addressing socket -for connection to flat cables -Quantity: 2 pieces available -Price: per piece

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm -Weight: 10.8 kg

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 147 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 165/65/H42 mm -Weight: 2.2 kg/piece

For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Low voltage relay, varimeter E. DOLD & SÖHNE AA9043.12 220 / 380 V 3AC 50 / 60 Hz Contact power: 250 V AC, 3 A used ! Dimensions: 80 x 45 x 120 mm

Undervoltage relay, varimeter E. DOLD & SÖHNE BA9043/002 0039121 230 / 400 V 3AC 50 / 60 Hz used, tested ! Dimensions: 75 x 45 x 130 mm

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 167/56/H43 mm -Weight: 2.2 kg/piece

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Bezel, steady rest, lynette -Bezel: lower part 2 pieces -Type: 79031/4 -Clamping width: 147 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions each: 340/55/H70 mm -Weight: 9.1 kg/piece

Directional Control Valve Base ORSTA Dn25 - TGL 20705 Pn 1 MPa ED 100 TGL 43334 220 V AC New ! Dimensions: 310 x 1110 x 65 mm

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

\" Power: 125 kW (3.0 diesel); Euro N/C Operating parameters: Manual gearbox; mileage 413,000+ km; GVW truck 3.5 t; GCW (comb.) 10 t; ABS; cruise control Workpiece capacity: BE-combination 10 t; open trailer; dim. L 12,300 mm x W 2,550 mm x H 1,100 mm; full aluminium body; winch; 13–15 pin connector Supported edges: N/A Edge types: N/A Included equipment: A/C (Klima); Webasto heater; air seat; ABS (truck + trailer); new tyres (6x truck + 4x trailer); rear brakes replaced; compressor hose new; turbo new; EGR cooler new; complete timing chain kit; prop shaft bearings + joints; all oils + antifreeze new; trailer: new air bags, valves, wheel bearings, full new lights + wiring Compliance: BE driving licence combination; road registered vehicle Power supply: Diesel Year/Manufacturer: 2012 / Iveco Daily 40C17; trailer 2007; aluminium construction Remarks: High mileage; exten ...

Auction-ID: A1-44832-294

Rated current: 2250A, rated impulse current: 75kA/125kA, degree of protection cabinet/floor: IP20/IP00, protection class: SK1, cable entry: bottom, main lines: 400V/230C AC, control lines: 110V DC, signal lines: 110V DC, number of panels: 7, panel equipment: panel 1: 4x NH00, panel 2: 2x NH1, panel 3: 2x NH2, panel 4: 2x NH3, panel 5-6: Siemens WLII 2000S+ETU25B, panel 7: Siemens BR6000 compensation. Documentation available. On-site inspection is possible.

Modular high-throughput pressure device with environmental control (single cell only) with 4 liquid channels scalable to 8 liquid channels for dispensing reagents Ability to dispense from 10 pl to 800 pl in a single drop, depending on the piezo dispensing capillary (consumable) used. The instrument provides consistent and highly reproducible reagent delivery with a mechanical precision of gantry motion of less than 3 μm and a spot positioning accuracy of typically less than 6 μm.

Stock number: H068, Low pressure homogenizer, stainless steel,, Gaco type AL-70, table model,, Theoretical capacity: 600 l/h., Max pressure 10 bar., Material: Stainless steel AISI 304

Stock number: H056, Low pressure homogenizer, stainless steel,, Gaco type AL., Table model., Theoretical capacity 600 l/h., Material: Stainless steel AISI 304

Stock number: H063, Low pressure homogenizer, stainless steel,, Gaco type AL., Table model., Theoretical capacity 600 l/h., Material: Stainless steel AISI 304

Stock number: H050, Low pressure homogenizer, stainless steel,, Gaco type 2., 2,2 kW motor,, 220/380 Volt., 1420 rpm., Material: Stainless steel AISI 304

Stock number: H046, Low pressure homogenizer, stainless steel,, Gaco type AL., 1-stage., 0,75 HP motor,, 220/380 V., Theoretical capacity 600 l/h., The homogenizer has not been used., Material: Stainless steel AISI 304

A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible.

Electric walker trucks, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EJE 116Masch. No: 90281103 year of construction 2007Nominal load capacity: 1600 kgLifting height: 200 mmFork length: 1150 mmOperating voltage: 24 VoltTotal length: 1750 mmTotal width: 730 mmHeight with drawbar: 1300 mm- Battery from year of construction 2013, type 24V 2PzS 250 (24 Volt, 250 AH)- Battery automatic charger- 5575 operating hours read. Weight approx. 560 kggood condition; used

Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used

Electric walking forklifts, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EME 112Masch. No: 90145339 year of construction 2005Nominal load capacity: 1200 kgLifting height: 200 mmFork length: 1170 mmOperating voltage: 24 voltsTotal length: 1550 mmTotal width: 700 mmHeight with drawbar: 1300 mm- 2 pieces traction batteries NEW from year of construction 2024, type 12 volts, Ah 55- integrated automatic charger, type E 230 G 24/6 (24 volts, 6 amps)Weight: approx. 175 kggood condition; used

Loading area length: 2.98 m, loading area width inside: 1.28 m, height of loading area inside: 50 cm, height of floor to platform 40 cm, gross vehicle weight 2000 kg, payload 1390 kg, 610 kg dead weight, total length 3750 mm

Equipment: Spacious interior with stainless steel shelves and doors for optimal sample organization Strong insulation for constant temperature even in the event of a power failure Digital control element with temperature display RS232 interface for external monitoring and data acquisition Robust castors for easy transport Condition: Used, functional With slight signs of wear (see pictures) Interior clean and fully equipped

Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg

Viewing by appointment Only the trailer Auction-ID: A1-43889-15

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Equipped with: 412x249x137, 920x249x93, maximum speed 40 km/h Auction-ID: A1-40132-182

Equipped with: 4x wheel arches, high headboard with work light, last axle trailing steered, sockets at the rear, loading deck, wooden floor, lashing eyes on loading floor, new MOT, rear support legs, side storage compartment Auction-ID: A1-42011-48

DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic thermoforming press with integrated drawing pad function for forming processes, drawing work and precise sheet metal processing. Base price: 76000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. T-slots and drilling patterns according to customer specifications Ad ...

Perfectly working 2 axle Chieftain. Transporting heavy machinery or equipment behind tractors • Industrial or construction transport • Internal use in logistics or on sites Auction-ID: A3-43366-7842

Equipped with: 3-axles, lashing eyes on loading platform, hydraulic folding road plates, support legs, leaf suspension front and rear, Michelin tires, BPW Axles, Nato plug, air brakes, NL License plate Auction-ID: A1-42012-59

Equipped with: hydraulic tailgate, spare wheel, side storage box, wabco air system, winch, BPW axles, lifting bed, forced steering steering, remote control, sunroof Auction-ID: A1-42012-57

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-190

Equipped with 2 adjustable shelves and oak look melamine top top. NOTE this cabinet is without a key Auction-ID: A1-44654-195

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-191

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-193

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-192