low loader used for sale

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Circular saw blade Anfasautomat The BK 450 circular blade contact machine automatically handles the lateral chamfering or bending of HSS saegee blowers up to 450 mm in diameter. The special feature of the machine is that it is connected to two separate grinding units and thus the saege leaf is fasted on both sides at the same time. This means lower ruest and faster grinding times. Diameter range: 50 - 450 mm Tooth pitch: 2 - 12.5 mm Saegeblatt thickness: max. 4 mm CBN (for groove grinding): 25x 8 and 30x 8 mm CBN or bakelite: 60 x12 mm Weight: approx. 115 kg Dimensions (L x W x H): 735 x 630 x 1350 mm

McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

Model: Gothot 90, Type: JRHH5ARGA Year: 1958 Capacity: 90kg of green coffee per roast (360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Gas: natural gas/LPG Burner: Gothot - indirect Pneumatic green coffee loader, destoner and cyclone included The roaster will be fully refurbished including: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing new direct drive motors with speed control on the destoner, drum and exhaust fan, - installing new pneumatics, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - repairing the burner (optional: new burner) - new paint - thermal paint on the parts that are exposed to high temperatures and powd ...

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

DATA ON THE MACHINE Machine type: Front forklift / forklift Manufacturer: CLARK Model: CGC 70 Built: 2001 Condition: very good (used) Price 22,500 Euro net plus VAT Location Warstein , Germany Reference M-CLA-0820 Description We offer you a used forklift from the manufacturer Clark. Very low centre of gravity (bandages tyres) and very compact forklift. Very good converter, perfect for complicated machine transports. Technical data Payload 7000 kg Weight 9100kg Lifting height 3300mm Tree width 1400mm Fork length 1800mm 2 gear gearbox Engine hours 2595h (demonstrable) Machine comes first hand, all repairs were carried out by a specialist company. The paint is original! Rental from mid-September is possible. The hours may of course vary, as the forklift is in use! Our offer is aimed at professionals who are covered in accordance with the Trade C ...

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres Available: 4 pieces UNI-SCHLI-FOR B. No. 18-086 A-D GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 2 crane eyelets 2 Threaded nozzles DN 50 1 elbow NW 40 cut off 1 nipples 1" 1 nipples 1/2" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos The containers additionally have 1 slanted seat flange NW 150 for agitator without agitator A container has a slight vacuum damage at the top

Cummins Engine Building year 2010 Power 600@1800 rpm low hours

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres UNI-SCHLI-FOR B. No. 18-087 A-F GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 3 crane eyelets 2 Threaded nozzles DN 50 1 nipples 3" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos Three of the containers have an additional 1 agitator flange DN 200 A container has a slight vacuum damage at the top

Water basin heated according to photos. 230Volt, 1,200Watt Sthf0o Heating infinitely adjustable from 0-100%. Lows in different sizes to cover the water surface.

mill low speed / crusher Moditec Bigger 10 2003 year // very good condition

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Pass-through width mm: 150 Pass-through height mm: 40-120 Workpiece length min mm: 450 Configuration: Position 1 - Vertical swivel brush unit L (Manual) Position 2 - Vertical swivel brush unit R (Manual) Position 3 - Lower grinding plates (motorized) Position 4 - Lower grinding plates (motorized) Position 5 - Lower grinding plates (motorized) Position 6 - Lower Horizontal Brush Unit (Manual) Total connection KW: 15 Weight Kg: 2000 With roller conveyor and conveyor belt

Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos

Planetary stirrer Rego PM 40 E -with 1 boiler -with 2 whisk 1 kneading hook -digital control -Boilers lower up electrically -for max. 40 litres

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Band saw of the Fa DoAll Dimensions 1.3m wide; 1.3m low; 2m High Work table area 850670mm max workpiece through-the-box approx. 300mm Pre-laying infinitely variable speed transmission Welding device with grinding stone for band saw blades Feed infinitely adjustable; Return without function

Power 35 cbm/h Consisting of: UV Reactor, case stainless steel material 1.4301 Material Reactor Chamber: pure quartz Volume 25.0 l UV spotlights Hg low pressure spectrotherm emitter Power 160 watts

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

Additional tank with Spaenefoerderer GF Filter technology FU Dimensions 1.6mlang inc Spaenefoerderer 0.7m wide to motor 0.9m 1m High Mass tank contents High 500mm to bottom pipe 350mm Low 680mm Long 960mm

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

Floor oven Friedrich E3 6/8 -3 floors each 60x80cm -Upper and lower heat can be controlled separately -digital control -with fermentation chamber -with exhaust hood -can be used on wheels -Floor height 13.5cm -with fermentation chamber

Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN  ...

NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit

Waste Baler BTS-MF500LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 500 kg - Compact and low design with only 2249 mm height - Suitable for baling of cardboard, film, clothes, cans, PET, Canister, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:50 Ton Motor: 11 kW 32 Amp Power suppl: 380-400 V (3 Phase) Machine size (H x W x D): 2249 x 2041 x 1350 mm Tr ...