low loader used for sale

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested

Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details.

table length: Rohmateriallänge 6500 mm table width: Rohrdurchmesser max. 230 mm burner heads: 1 Control: CNC workpiece weight: 300 kg traversing speed: 91 m/min weight: 5750 kg dimensions of the machine ca.: 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding dev ...

Automatic feeder Mathias Bauerle Loader - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Automatic feeder Mathias Bauerle Loader Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Automatic feeder Mathias Bauerle Loader Price: 1700 EUR Download PDF Automatic feeder Mathias Bauerle Loader The device is in very good condition. Production Germany. Feeding on tranport belts. The possibility of adjusting the extension of the „tail” The adjustable height of the device allows the attachment of the feeder to each machine. Ask About The Product Name (required) Company name Email (required) Phone M ...

Lifting table designed to stay at the same height regardless of load., The table is turning which allows placing the pallet in rotation if needed., Maximum capacity 1,300 kg, Guided scissor-lift pneumatic elevation, Pneumatic: 75psi / 5.2bars, Palletizing operation, Maximum load capacity (kg):: 3 000 lbs ( 1360 kg ) , Table diameter (mm) :: 1095, Maximum height (mm): 880

Description Item # 9385 - SEMI-AUTOMATIC CHOCOLATE MOULDING LINE Manufactured by SELMI mould size 275 x 175, Speed around 4-6 moulds per minute including: SELMI Loader 275, year 2018 including scraper and mould vibration SELMI TOP temperer, year 2008, SELMI TUN cooling tunnel, year 2017, with upper deck dropping on to return belt for additional 2-pass cooling belt width 320mm tunnel 10m long: (1m infeed; 3 x 270cm covered sections; 1m outfeed) including refrigeration system

tube diameter: 8 - 230 mm workpiece weight: 300 kg weight: 2450 kg dimensions of the machine ca.: 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100100 - 140140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adapt ...

Type: LOWARA used water pump Machine number: 02192 Pump: C0350/09/A Q: 6-24 m m³/h H: 12.7-5.9 m P2: 0.9 kW Hmin: 5.9 m Engine: 3 SM71BG / 309-50 Hz

Type: LOWARA used water pump Machine number: 02193 Pump: C0350/09/A Q: 6-24 m m³/h H: 12.7-5.9 m P2: 0.9 kW Hmin: 5.9 m Engine: 3 SM71BG / 309-50 Hz

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Machine: centrifugal pump Manufacturer: Lowara Type: CO 350 / 15 K / A Year of construction: 2008 Q = flow rate: 6-30 m m³/h P2: 1.5 kW H: 16.9-7.2 m Hmin: 7.2 m Maximum working pressure: 8 bar continuous operation Motor, protection class: IP55 Insulation class: F Design: Closed engine with separate ventilation and aluminium alloy finned casing. Equipment: Equipped with silicon carbide / tungsten carbide / FPM seals as standard. Visit us at the factory in arrangement.

KSB Wilo, Grundfos, Allweiler pumps in stock. Incl. VFD,. from 1KW to 37KW, 1m / h up to 350m / h designation, see list.

Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...

Liquid pumps, sold as mixed lots of approx. 10 tons. Various capacities and brands

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve

Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used filler Alfatek low vacuum 3.500 bph: Year: 1995 Condition: As Is Used filler Alfatek 20 valves Year: 1995. Speed: 3.500 bph Direction: Clockwise Filler 20 valves Type of filling: low vacuum Safety protections Code: T 82 More details: https://bottlingscout.com

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: ja Löwer MZP 1 Mini Tine Press --------------------------- For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm LÖWER BeamSander HBS 402 -------------------------------- Single-sided belt sander for sanding beams, Glued beams and other bar-shaped workpieces Wood with two sanding units from above. - constant working height enables the use of Roller conveyors in front of and behind the machine - heavy version with cast table - Conveyor belt feed with heavy pressure rollers - Calibration unit with steel roller - Fine grinding unit with fixed calibration sanding shoe - Working width 390mm - Workpiece thickness 4mm - 390mm 1. Grinding unit (calibration) - heavy steel roller with 200mm diameter - stable roller bearing - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Chip removal depending on the belt grain size up to 2mm 2. Grinding unit (fine grinding) - Calib ...

Used Used Borelli low vacuum filler 12V: Year: 2014 Condition: As Is Model: RMS12 Year: 2014 Speed: 1.200 bph Direction: clockwise For glass bottle 12 low vacuum mechanical valve Accumulation table and conveyor belt Safety protection Code: T 214 More details: https://bottlingscout.com

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm LÖWER-DoubleSander Solid DSM 3000 ---------------------------------- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumat ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ------------------------------------------------- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat interve ...

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm weight of the machine ca.: 1500 kg LÖWER Leistomat SD --------------------------------- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units  ...

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm LÖWER CrossMaster DBx2-200 -------------------------------- for the finish sanding and intermediate sanding of all strips Type with simultaneous processing from above and below - 1 disc sanding flap unit each from above and bottom, D= 200mm, 0.75 kW, - Continuous speed control of the disc units 200-600 rpm via frequency converter - 1 grinding flap roller each from above and below, D = 270mm, B=150mm, counter rotation, 0.75kW each, - Continuous speed control of the grinding spindles 200-1000 rpm, via frequency converter - Staggered arrangement of the sanding units, each at the top and bottom Below, grinding flap disc with subsequent grinding flap roller - Working width max. 200mm - Safe conveyor belt feed (top and bottom). spring-loaded pressure rollers, transport belt width 200mm - continuous feed 4-20m/min ...

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER double-sided grinding machine DSM 2000 --------------------------------- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Fo ...

Low and Duff 6T Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

Chiller with refrigerant R454B < 500GWP. Cooling capacity according to Eurovent 34kW. internal pump, internal tank, coaxial evaporator, winter package up to an ambient temperature of -25°C, internal bypass. Delivery time approx. 6 weeks Also available with other cooling capacities.

Model V 1000 Machine no. HO 1026 Center height over flat web 500 mm Circumferential diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face plate diameter 900 mm Max. workpiece weight between tips 5,000 kg Max. workpiece weight with 1 setting stick 6,000 kg max. workpiece weight with 2 stacks 7,100 kg incl. documentation

Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Loewer edge finishing machine MiniSpin N ------------------------- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

Sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. Including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. - Specifications: filling volume 20-1000ml | bottle size range: diameter 20-150mm, cap diameter: 20-70mm | 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour | tolerance of filling quantity: +/- 1% | yield of capping: < 99% | 380V, 3.5kW, 0.6m?, 6bar. - Please note: These are specifications for a sample system only. The final specifications will vary. Please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Us ...

turning length:800 mm total power requirement:380 V weight of the machine ca.:1400 kg dimensions of the machine ca.:2200 x 1200 x 1300 m centre height:160 mm chucking diameter:150 mm

A packing station Marel including three scales is available. The machine is suitable, for example, for flow pack packaging (Geba SC 125 MAV etc.). It is well packed and ready for collection. Documentation available. An on-site inspection is possible.

Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja Löwer MZP 2 Mini Tine Press --------------------------- For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LOWA Model: Capping machine WK12-17 Year of Manufacture: 2025 Type of Machine : Bottle filling and capping machine Condition : New

Edge grinding machine Fabr. Löwer Model No.: KS225 Swivelling grinding unit Grinding surface: 150 x 800 mm Sanding belt length 2250 mm Total weight: 77 kg Suction nozzle: 2 x 100 mm Motor: 1.1 KW

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg

Used Used MBF triblock low vacuum for glass bottle: Year: 1999 Condition: As Is Model: SYNCROFILL 1440.28 1200.30 360.6 Year: 1999 Speed: 4200 bph Direction of rotation: clockwise Suitable container type: glass bottles Rinser with 28 grippers and fixed nozzle Single water treatment Electric height adjustment Low vacuum filler with 30 mechanical valves Tank height adjustment: electric Valve function ? single pre-evacuation Capper with 6 flush cork heads Vacuum and inert gas system Height adjustment: electric Safety protection Code: QT 782 More details: https://bottlingscout.com