loop used for sale

Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips Pass Line Height: 900mm Line Threading Direction: Left To Right Coil Car With Coil Skid Uncoiler Coil Peeler Coil Opener Three(3) Bending Roll No.1 Pinch Roll Crop Shear with Guide Table Si ...

Key data: 63 mm

We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!

SigmatekCSM011 C-DIAS Digital Bus Module Loop Pull Magnet Module Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Loop device Rudolf Schad, type E 85-1, Year of construction 2012, connection 400V, Dimensions LxWxH approx. 77x80x123cm, weight approx. 144kg, good used condition, works perfectly

Loop Detector Relais ALBANY VEK M1H-B 4904R035 24 V AC/DC 50 Hz used, tested ! Dimensions: 85 x 25 x 100 mm

internal grinding diameter: - mm grinding depth: -- mm min. dia.: - mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wiegand Hangfix B-20, with 3 extra spools of thread, Dimensions LxWxH approx. 75x75x133cm, weight approx. 140kg, good used condition, fully functional

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Score 437,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 437,000.

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Meter reading 253,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 253,000.

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

2x Hohner Staplehead Universal 52/8 Ring eyelet; suitable for ring eye stitching; Bracket width 14mm; Max. Staple thickness 8mm; can be used in various machines. 2x Hohner stitching head Universal 52/8 loop; used for loop stitching; clamp width 14mm; max.stitching thikness 8mm; can be used on different machines.

Kohler unwinding reel with 9 roll straightening unit Last use Align copper L profile from coil, feed profile via balancing section. Specifications Number of rollers: 9 pieces Roll diameter: 30 mm Throughput width: 120 mm Belt speed: 0-10 m/min Belt speed control: Infrared via belt loop Working direction: left to right Belt inlet: left Measuring device: digital Roller mill adjustment: motorized Quick-change device: manual Engines Straightening machine drive: 5, kW drive at 3000 rpm Oil pump: 0.06 kW power at 1300 rpm Roller mill adjustment: 0.15/0.6 kW at 81/344 rpm Total drive power: 10 kW Voltage: 380 V Weight 6 t Unwinding reel type 300.2 Load capacity: 2 x 300 kp Width: 80 mm Spread: manual Spreading range: 750 - 1050 mm Coil outer diameter 1200 mm Brake: Disc brake / pneumatic Page shift: manual Panning: manual HK 120 upright straightening ma ...

MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...

Schaudt PF4 1000 - Premium overhaul [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 mm - Grinding length: 1,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 300kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 4,500x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Schaudt & Studer Grinding Machines - Premium Overhauled [RETROFIT] - various conventional, cycle-controlled & CNC grinding machines - for various workpiece Ø - with grinding lengths from 200 to 3,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: according to customer requirements - The attractive alternative to the new machine - We are also happy to overhaul your machine, more information on our homepage Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Tubular heat exchanger mounted skid allowing to thermoregulate (heat, cool, maintain) a heat transfer fluid via a secondary circuit with 3 entries. Very often associated with a filter dryer or reactor when there is an issue / risk of product contact. Primary circuit : Heat transfer fluid loop Volume: 3.5L Pressure: +6 bars T?C = 150?C Secondary circuit : Number of inlets: 3, with one loop dedicated to steam Volume: 14.5L Pressure: -1/+6 bars T?C = 150?C Steel extension vessel Pump 15 m3/h Year 2006

Lifting strap, sling, loop tape DOLEZYCH WLL 10.0 t load capacity depending on application: max. 20,000 kg usable length: 3,000 mm width: 300 mm thickness: 10 mm loop width: 140 mm material: polyester. stitched in two layers Colour: Orange used, tested ! Dimensions ( packaging ): 500 x 300 x 180 mm

Lifting strap, sling, loop strap MEILI HEBEZONE WLL 8,000 kg load capacity depending on application: max. 16,000 kg usable length: 8,000 mm width: 240 mm thickness: 7 mm loop width: 120 mm material: polyester. two-ply sewn Color: Blue used, tested ! Dimensions ( packaging ): 450 x 240 x 280 mm

Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods Features: For a customiza ...

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil outside - diam. ca.: 1600 mm 0: 1-10 U/min engine output: 2 x 0,75 kW, insgesamt 2 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil inside-diam. ca.: 1600 mm 0: 1 - 10 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Liney Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Driv ...

Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console

High Strength Packaging Tape Production Line The equipment consists of: - Loading trolley - Drum type unwinder - Welding machine unit - Flaw detector - Centering device block - Disc shear block - Burr flattening unit - Loop pit No. 1 (concrete pit lined with sheets) - Separating roller - Device for individual belt tension - Braking unit (felt) - Tape edge processing unit - Pulling rollers - Pre-heating bath - Final heating bath - Cooling bath - S-roller block - Water cooling bath - Varnishing bath - Drying oven - Bath waxing tape - S-shaped rollers - Vertical tape storage - Loop pit No. 2 (concrete pit lined with sheets) - Braking unit (felt)

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Fully automatic unwinding reel Remote control console Automatic and manual working mode Fine adjustment of speed Potentiometer Simply synchronized with punching machine Reel motorized, with Central Expansion Reel run both directions, prewaerts and rueckwaerts with loop sensors control Speed from 0.1 to 30 RPM rpm Engine with gearbox Reel max load 1 ton Winder strip width up to 300 mm Inner diameter 250 mm min max. 500 mm Outer diameter max. 1300 mm Power 0.37 KW Dimensions 1,200 mm x 1,200 mm height 1,600 mm with CE certificate in stock 2 essa, 2 shaal and 12 brother general overholt punching machines

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm

Alpina type Swipper Model 15 12 Year 2005 with outfeed conveyor and hanger loop dispenser

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

Dishwasher dishwasher Model: S-Line 3500 + 3-stage filter system Euronorm 500 3 litres of fresh water consumption Display control 6 flushing programs 2 Special (extra fresh water and endless loop ) peristaltic rinse agent and cleaner dosing pump extra deep interior for sheets/tubs 600 x 400 mm DGUV V3 tested Drain/lye pump electronically Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 680 x 820 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Supply and drain hoses You can find more machines in our large warehouse!

Techn Data: Clamping range, Tips height of the part head, without /with swivel plate 65/95mm Largest cutter pass-through between the peaks 130mm Largest distance between the tips 250mm Largest cutter diameter at flying clamping 320mm Inner cone partial scopic spindle standard cone 40 or Morse 4 Largest bore of collet pliers 25mm Motion Longitudinal movement of the partial slide 260mm Cross-movement of the cross-loop guide Coarse 200mm Cross-movement of the cross-sled geese Fine 50mm Height adjustment of the vertical slide 50mm Swivelability of the table slide 360° Swivelcapability of the vertical slide guide 360° Swivel lingability of the swivel bearing around axis persethering to the partial spindle 220° Swivelability of the partial head slide guide around axis parallel to the partial spindle 30° Largest grinding length for spiral grinding 100mm Smallest and larg ...

Saacke Universal Tool Grinding Machine - with partial apperat - with cylindrical loop device - with collet chuck - with many grinding wheels Center height: 125mm, Center width: 600mm, Speed: 3300/ 5400/min, Grinding length: 500mm, Table dimensions: 835x145mm, Grinding wheel dimensions: 175x20mm - with coolant devices Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with f ...

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg