longitudinal welding used for sale

CNC Swiss Automatic Lathe TRAUB TNL 32 9P With control TX 8 i - p Year of Make: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: Max. 6400 rpm C Axis SUB-SPINDLE Speed range: Max. 6000 rpm C Axis TOOL TURRET TOP: Speed range: Max. 12000 rpm 10 speed turret ( All driven ) TOOL TURRET ABOVE: Speed range: Max. 12000 rpm 9 speed turret ( All driven ) REAR UNIT Number of stations: 8 Of which powered: 3 ( T 12 , 13 and 14 ) Speed T12 + T 14 ( 12000 rpm ) Speed T 13 : ( 4000 rpm ) With the following accessories: Full protection cab with interior lighting Various powered tools Various tool holders IEMCA Boss 338 Bar Feeder - HD KSS Pump 20 bar Chip conveyor Operating Instructions

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Subframe: longitudinal member -Type: Length 2000 mm -Number: 65 pieces of longitudinal beams available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 2000/120/H110 mm -Weight: 12.4 kg/piece

Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Subframe: longitudinal member -Type: Length 2000 mm -Number: 50 pieces of longitudinal beams available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 2000/45/H140 mm -Weight: 7.3 kg/piece

bar material dia.:38 mm turning length:350 mm turning speeds:7.000 / 7.000 U/min number of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 31i-B5 rapid traverse:30 m/min total power requirement:10,5 kVA weight of the machine ca.:6,5 t dimensions of the machine ca.:2,50 x 1,45 x 1,75 plus Lademagazin m work piece power:4 kW toolpiece turning speed range:5.700 1/min main spindle power:11 kW sub spindle power:7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining"

bar material dia.:13 mm turning length:205 mm turning speeds:12.000 / 12.000 U/min number of tools:29 driven tools:ja / yes 19 control:FANUC 16 iT total power requirement:9 kVA weight of the machine ca.:1,7 t dimensions of the machine ca.:2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank ca ...

turning diameter over bed:20 mm spindle passage:3-20 mm turning length:250 mm control:FANUC 31 i-A main-spindle speed:10.000 1/min subspindle speed:10.000 1/min Main spindle capacity:3,7 kW subspindle power:2,2 kW number of tools:35 weight of the machine ca.:3,3 t dimensions of the machine ca.:2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short  ...

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Spot Projection Welding Machine NIMAK Type PMP 5 / 35Spot Welding Machine, Projection Welding MachineFabr. No. 88100 Year of construction approx. 1988Power at 50% ED 35 kVAArcharge 250 - 450 mmWorking stroke 40 mmElectrode force 100 - 460 kp infinitely adjustableElectrode force at 6 bar 460 daNBobedience air pressure 2 to 6 barElectrode arm 60 mmElectrode holder 30 mmInsert electrodes cone MK 2 17.78 mmArm spacing 200 / 400 mmAdjustability of the electrode holder 200 mmConnected load 83

MIG MAG Welding Machine, Shielded Gas Welding Machine CLOOS Type GLC 357 NMIG MAG Welding Power SourceFabr. No. 576 Year of construction approx. 1985Nominal power 350 Amp.Power 350 Amp. - 80% ED 310Amp. - 100% EDEinfinitely variable adjustment rangeConnecting hose package 4.5 metersMains connection 380 Volt, 50 Hz, 32 Amp. Plug - 2-stroke and 4-stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch- water-cooled-

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

Spot Projection Welding Machine NIMAK Type BMP 20/150Spot Welding Machine, Projection Welding MachineMasch. No. 81692 Year of construction approx. 1980Power at 50% ED 150 kVAAf clamping plate lower 200 x 160 mmClamping plate upper 200 x 160 mmPower setting infinitely variableThroat max. 150 mmElectrode force 200 - 2000 kp infinitely adjustableOperating air pressure max. 6 barConnected load 600 kVANnet connection 380 volts, 50 Hz- welding control DTW 4Z 2P- single points and series points- bounce

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9 Auction-ID: A1-40237-134

Unaudited from company closure Auction-ID: A7-45427-53

Welding Helmet RL-600L Automatic welding helmet RL-600L – Professional welding helmet Specifications Model: RL-600L Filter dimensions: 133 x 114 x 10 mm Field of view: 100 x 82 mm Optical class: 1 / 1 / 1 / 2 Settings & performance Light mode: DIN 3.5 Dark setting: DIN 5–9 / 9–13 (adjustable) Switching time (light to dark): 0.08 ms Delay (dark to light): 0.1 – 0.8 sec (adjustable) Protection & safety UV/IR protection: up to DIN 16 (permanently active) Automatic Lens Control Use & nutrition Power supply: solar cells + 2x CR2032 lithium batteries (replaceable) Working temperature: -5°C to +55°C Storage temperature: -10°C to +70°C Material Helmet: PP (impact-resistant plastic)

full line for mesh up to 6 m

DIA. RANGE: 12.7 - 50.8 MM; STRIP WIDTH: 165 MM, THICKNESS: 0.6 - 2.0 MM; COIL WEIGHT: 500 KG, 60 M/MIN., ETC.

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

see picture attached

Table load 35 to . tischdurchmesser 3,000 mms

Table load 30 to . table diameter 3,000 mms

Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02

2 pieces

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...