long used for sale

Machine type compressor Birkenstock brand Type K8 / 40 / 230 Connection voltage 1 x 230 Volt Version mobile version Fuse 16 amps Dimensions L x W x H 1,120 x 400 x 760 mm Weight 60 kg Age 6 months Condition very little used Boiler capacity 40 liters intake capacity 250 litres/min. delivery quantity 175 litres/min pressure 10 bar Cylinder 1 piece Original price incl. water separator 1.035,00 € + VAT Price incl. water separator from stock Munich 895,00 € + VAT Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 10 mtr. long, ready to connect 34,80 € + VAT Sach-Nr. S-50.98.10 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 25 mtr. long, 9 mm Ø 61,10 € + VAT Sach-Nr. S-50.98.25 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 50 mtr. long, 9 mm Ø 104 ...

Winding machine Böhl type SENIOR / S-2400 VA Specifications: • Fully automatic • For packaging rod-shaped products • Product height (mm): 19 - 600 • Product width (mm): 600 - 2100 • Product length (mm): 2400 - 5700 • Product weight (kg): 3000 • Cross-sectional diagonal max. (mm): 2184 • Brake motor for winding ring drive: controlled by frequency converter • 2 driven roller conveyors: each 3000 mm long for the inlet side of the machine, designed with brake motor • 2 driven roller conveyors: for the outlet side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) designed with brake motor • 1 packing material holder: for stretch film, crepe paper, PE film etc. • Packing material roll width max. (mm): 500 • Automatic gripping, cutting and laying device: for PE stretch film, in version as smooth cut • Electrical device for laying edge  ...

Guide profile for slat-band conveyors per m, Versaflex, A06P-3, 65mm, MK, mint condition -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Guide profile, guide rail 65mm wide, 4 pieces 300cm long, 4 pieces 131cm long, 4 pieces 235cm long Material aluminum Incl sliding strips ASL-25-0 HDPE black As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

properties Used belt conveyor of the manufacturer Costo Colour: dark grey Incl. SEW engine Year of construction: 2009 Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Feet to be ordered separately specifications: Dimensions of the belt conveyor Total length incl. feed belt: 15.230mm Total width incl. motor: approx. 870mm Total width without motor: approx. 790mm Belt width: 700mm Belt type: Lenk's groove Steel frame Frame height: 105 mm Plant consists of: 6 segments - 2.000mm long 1 segment - 2.130mm long 1 segment - 1.100mm long (feed belt) Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article u ...

properties Used belt conveyor of the manufacturer Costo Colour: dark grey Incl. SEW engine Year of construction: 2009 Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Feet to be ordered separately specifications: Dimensions of the belt conveyor Total length incl. feed belt: 11.350mm Total width incl. motor: approx. 870mm Total width without motor: approx. 790mm Belt width: 700mm Belt type: Lenk's groove Steel frame Frame height: 105 mm Plant consists of: 4 segments - 2.050mm long 1 segment - 2.000mm long 1 segment - 1.100mm long (feed belt) Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article u ...

BIZERBA checkweigher, Check-Weigher CWM model. High quality equipment. Used equipment, its condition is excellent, fully restored and with guarantee. Includes Bizerba touch screen, GT-CT model. Internal checkweigher. Weighing tolerance from 6000 gr to 100gr. Maximum production capacity of 100 packs per minute. Electrical power 220V, 50Hz, 2.4 A. Total equipment measurements 1950 mm long x 1510 mm high x 580 mm wide, total work tape measurements 1430 mm long x 580 mm wide x 800 mm high (adjustable), work tape measurements 430 mm long x 300 mm wide x 3 units including the scale. Checkweighing, checkweigher, dynamic scale, control scale, checkweigher. Its condition is excellent re-release. Equipment reviewed and guaranteed.

LIQUIDATION of automatic debarking machine from the manufacturer MAJA, mod. VBA500A. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Characteristics: Tape width 450mm, blade width 450mm. Measures input tape: 1000 mm long x 450 mm wide. Output belt: 870 mm long x 450 mm wide. External measurements: 920 mm wide x 1190 mm high closed lid – 1790mm open lid, 960 mm high entrance tape x 2130 mm long. Electrical power: 1.1Kw, 2.6A, 380V, 50HZ, Equipment to plug and work. Its condition is excellent re-release. Equipment reviewed and guaranteed. OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you need any information, more photos, or videos and do any type of test in our exhibition pavilion you have at your disposal by calling the commercial attention phone. If you are really interested in the team, call us at our sho ...

Automatic traysealing machine, for preformed containers. Semi new used equipment. From the manufacturer INAVEN MASCHINEN AG (VC999), model TS1200 N. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 4400 mm long x 870 mm wide x 1790 mm high, input tape 2700 mm long, output tape 1120 mm long. • Power 6 kW; • Power supply 400 V, 50 Hz; • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers 2nd Mold 180x130 mm x 2 containers • Film width 460 mm; • Roller width 480 mm; � ...

- for the production of sliced rolls, smooth rounds, long rolled rolls and double pieces Year of construction: 2007 Weight range: 30-85 g Hourly output: max. 3,000 pieces 4-row system with 600 mm working width Integrated dough divider and drum transformer, Multimatic Pre-fermentation time 12 min (6 min before long roll station and 6 min between long roller and cutting station)Hanger drying Variable depositing device for digestate carriers of 3 Euro sizes: 400x600 / 580x780 / 580x980 mm UV Disinfection StationSiemens Touch Screen Control External dimensions (LxWxH): 3000x1250x2550 mm

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder Another 400 bakery machines in stock!

Winding Machine, Cone Winding Machine Universe Kasper Model: HWM 50/70 for all sticks such as Kornspitz, pretzel and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Upper feed roller coated Changing basket on top reinforced storage Wrapping weight range: 30 to 450 grams depending on TA Croissant winding machine down with long roller for skeins and pretzels max 700 mm long DGUV V3 tested Machinery on the move Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty only on spare parts Option: Feeder More TOP bakery machines in stock!

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

Bridge paternoster / carousel / long goods paternoster for long goods up to approx. 6,60m, 700kg / gondola – used - : Price site: 32.500.-€ (net), plus dismantling etc.! Manufacturer: Schultheis (CH) Type: IPN 11/TL Fab.-No.: 93-03018/2 Year of construction: 1993 Payload per hanger: 700kg Total payload: 7.700kg Number of gondolas: 19 pcs. Connected load: 2x1,5kw, 3x380V Control voltage: 220V, 50 Hz Single-sided tensile force: approx. 20% Dimensions: L=6750mm, W=7750mm, H=4460mm Dimensions of the gondolas: L=550mm, W=6600mm, H=330mm The control system was renewed in 2001 and all documents are available. (Instruction manual and control manual) TÜV and DGUV test reports are available. Load handling device, drive via roller chain with guide rollers for nacelle transport Control: Main control station on the extraction side: electronic panel with dead man's or dea ...

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229 and Rails Complete Panel Line in 32 Bay Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229, and Rails Lot 221 PLATE JOINING MACHINE SIMTECH Lot 222 BUTT WELDING MACHINE SIMTECH Lot 223 BUTT WELDING MACHINE SIMTECH Lot 224 Chain conveyor SIMTECH Co. Ltd Lot 225 PLATFORM SUBST. FOR HULL SHOP A/B CUTTING MACHINE Lot 227 LONG FIT-UP MACHINE SIMTECH Lot 228 LONGI WELDING MACHINE SIMTECH Lot 229 Chain Conveyor SIMTECH Co. Ltd Rail span - 27 M Rail 1 - 295 M long Rail 2 - 298.7 long

Second-hand machine - Year of construction 2005 Cleaned & functionally tested expected to be available from mid-September 2023 = only 2622 operating hours within approx. 18 years (as of 04.07.2023) This corresponds to a work performance - of only approx. 145 working hours per year or approx. 12 working hours per month! - with 3 hours of operation: less than 900 working days or 3 years in total = In the 4000 TR/G-S version, the Mini Rex has two different large stamping strips, whereby round-knitted with a machine, as well as angular/cushion-shaped dough pieces can be made. Features of the Mini Rex 4000 head machine: - Hourly output: 2,040 - 3,960 pcs at 17 - 33 strokes / min, infinitely variable - Built in 2005 - Extended product range with 2 weighing punches (round & square) - Best effective results via infinitely adjustable active eccentric - with dough hopper and ...

Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15,  ...

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camer ...

Hand lever shears, long-knife sheet metal and round steel shears, lever shears, long-knife sheet metal shears -Manufacturer: Victoria, long-knife tin snips on a mobile stand -Blade insert length: approx. 350 mm -Sheet steel: up to approx. 4 mm -Rectangular profile: up to approx. 7 mm -Total dimensions: 1030/500/H1900 mm -Weight: 109 kg

Hand lever shears, long-knife sheet metal and round steel shears, lever shears, long-knife sheet metal shears -Manufacturer: Victoria, Long Knife Tin Snips -Blade insert length: approx. 350 mm -Sheet steel: up to approx. 4 mm -Rectangular profile: up to approx. 7 mm -Total dimensions: 670/180/H1260 mm -Weight: 55 kg

Very high quality machine almost new with just 4635 working hours. It is under power and ready to run. Includes: • Air Conditioner on the Electrical Cabinet • Voltage Stabilizer Transformer • Low pressure pomp for refrigeration 2 Bars-50 l/min with Refrigeration Container and outlet through nozzles • Pre-Equipped for Tool Center Cooling • Chip Conveyor • Digital rulers on all axes with air blowing • Air Blow Nozzles • Steering wheel • Wash Gun • Filings Reservoir • Integral fairing • Leveling Feet • Technical Documentation Kit • Operator Station • Electronic Centralizer MARTEST 802EW - Mahr • BT40 High Rotation Head – SFIDA/Japan • 4m cable MKD40 – SFIDA/Japan • Clamp Press 175x400mm (x2) – ROHM • Cone Modular SK40 AD – Rineck • Cone Modular SK40 AD ...

Round and long caster SUPERBA Model: SU Compact Combined circular and long knitting in one machine long effective channel 2500 mm max. bread length 500 mm Weight range 500 to 2000g Machinery on the move Capacity 800 - 2000 pieces/h with extra flour Connection 400V, 3 kW, 16A-CEE plug Dimensions: 2000 x 960 x 3500 mm, HxWxD Used machine overhauled 6 months warranty Many more bakery machines in stock!

Optimize Your Bottling Operations with a Used Arol Capping Machine 6 Heads Aluminum Screw 9000 bph When it comes to efficient bottling operations the importance of a reliable capping machine cannot be overemphasized For experts in the bottling industry seeking dependable and high performing equipment Consider a used Arol Capping Machine with 6 heads aluminum screw and a capacity of 9000 bottles per hour bph Arol is a renowned brand in the industry recognized for its quality and durability This particular model was manufactured in 1999 yet it still retains its high performance and reliability a testament to Arol s commitment to building long lasting machinery Its stainless steel casing ensures it withstands harsh conditions of the bottling environment thus guaranteeing long term use Arol Capping Machine Quality and Durability for the Bottling Industry The machine features a 6 head capping ...

Complete busbar system PLS 800, 3-pole, 3800mm, SV3525.000, Rittal, used Top Special price The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Complete busbar system PLS 800, 3 pol, 3800mm long, Rittal, used-Top consisting of: - 19 bar supports for 3 bars SV 9341.000 Rittal, - 4 x 3 Cu busbars PLS 800 each 695mm lg, SV 3525.000, 300mm² - 1 x 3 Cu busbars PLS 800 each 495mm lg, SV 3524.000, 300mm² - 4 x 3 bar connectors SV 3505.000, Rittal - 1 piece Riline60 base tray, 3800mm long, SV 9341.130 Rittal - 1 piece cover plate for Riline60 base tray, 1880mm long, SV 9340.210 - 2 pieces end cover for Riline60 base tray SV 9341.070, Rittal - 4 x 3 pieces SV 3504.000  ...

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

engine output: 5 kW saw-blade dia.: 300-350 mm Working speed: 0-40 m/min weight: ca. 1550 kg kg Concept 350 PLUS Partnership Edition pressure beam saw Cutting length: 3.200 mm ------------------------------------------------ combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ------------------------------------------------ Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including ...

Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...

:FS 2550 ADP | FS 3060 ADP | FS 4080 ADP grinding length:500 | 600 | 800 mm grinding width:250 | 300 | 400 mm Distance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mm table-size:250x500 | 300x600 | 400x800 mm max. table load:250 | 300 | 400 kg table speed -stepless-:5-25 m/min rapid traverse cross:900 mm/min cross feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical rapid traverse:450 mm/min vertical infeed, min.:0,001 mm dimensions of grinding wheel:180x13x31,75 | 355x38x127 | 405x50x127 mm spindle speed:2900 | 1450 | 1450 1/min spindle drive:1,5 | 3,7 | 3,7 kW hydraulic motor:0,75 | 1,5 | 1,5 kW weight of the machine ca.:2350 | 2500 | 3700 kg machine length:2680 | 3000 | 3300 mm machine width:2350 | 2350 | 2650 mm Optimized Structure ? The major parts of KRAFT grinders are manu ...

throat:580 mm bore stroke:650 mm X-axis :3300 mm y-axis:550 mm z-axis:650 mm Drill head RPM:bis 3800 U/min Drive x + y + z axis:Servomotor Rapid traverse x axis:20 m/min Rapid traverse y axis:10 m/min Rapid traverse z axis:10 m/min Distance table top - bottom Chuck:700 mm Table width:560 mm T-slots:14 Threaded drill up to:M4-M20 Tolerance x axis::0,1 mm Tolerance of y and z axis::0,06 mm total power requirement:4 kW weight of the machine ca.:ca. 4 t description of the Company Bauer: Drilling rig driving stand principle the table stops, the drill head moves. Simple operation, CNC knowledge is not required. Data import DXF and CSV. Robust design with proven engineering components and a clearer structure of the machine guarantee high availability and long service life. All this for a price which paid off faster than expected. In the development of the control system, special attention was g ...

Used roller doors for painting systems between the painting booth and the dryer Make : ITP, Wolf Width: 1 pc. approx. 6.1 m 1 pc. approx. 5.7 m 1 pc. approx. 2.6 m Height: approx. 2.6 m each Drive: electric, each approx. 0.5 kW Location : Nuremberg Warehouse Sell price: € 1,450,- for 5 to 6 meter long roller doors € 1,250,- for 2 to 4.99 meter long roller doors per net, from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Hot air Shrink tunnel for packaging e.g. briquettes or long products hot air shrink tunnel for packing of fire briquette or long woolden products

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC fraes machine is variable due to the adjustable working area (through lasshoehe under bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long freser ), whe ...

L-conveyor belt Conveyor width: approx. 300 mm horizontal range: approx. 1.4 m long declining range: approx. 4.4 m long

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...