long used for sale

36″ x .125″ x 15,000Lbs Yoder Slitting Line Make: Yoder, Material Width: 36”, Gauge: .010” – 125”, Weight Capacity: 15,000Lbs, Coil ID: 16”-20”, Coil OD: 62”, Direction: Right to Left. Mandrel Uncoiler, 3-Leaf Mandrel Design, Hydraulic Expansion, Air Brake. Slitting Head, Entry Driven Pinch Rolls, Arbor Diameter: 5”, Arbor Width: 39”, Adjustable Outboard, Manual Arbor Adjustment, 15HP Feed-Up Motor, DO James Gear Box. Recoiler, Face Width: 39”, Hydraulic Push-Off, Manual Grip, Strip Separators, 40HP 1775RPM Motor, DO James Gear Box. Scrap Winder, Self-Dumping Design, Mechanical with AC Motor. Electrics, hydraulics, controls, tooling. Installed

36″ x .187″ x 10,000Lb Paxson Slitting Line Make: Paxson, Material Width: 12″ – 36″, Material Thickness: .010″ – .187″, Weight Capacity: 10,000Lb, Coil ID: 20″, Coil OD: 62″, Direction: Left to Right. Mandrel Uncoiler, Slitting Head with 6″ Arbor Diameter, 25HP Feed-Up Motor, Tooling, Recoiler with Push-Off, 60/75HP Motor, Scrap Winder, 3-Arm Exit Turnstile. Electrics, Hydraulics, Controls, Tooling

52″ x .187″ x 30,000Lbs Braner Slitting Line Make: Braner Material Width: 12″ – 54″ Material Thickness: .010″ – .187″ Weight Capacity: 30,000Lbs Coil ID: 20″ Coil OD: 72″ Entry 3-Arm Turnstile Entry L-Type Coil Car Mandrel Uncoiler with Hold – Down Roll Hydraulic Peeler Edge Guides Electric Edge Control Three (3) Slitting Heads with 7″ Arbor Diameter Adjustable Arbors DC Motor Drive Two (2) Scrap Winder Pit Cross Over Table Combo Type Tension Stand with Water Cooled Brake Recoiler with Over-Arm Separator 125HP Recoiler Motor CMC Solid State Drive 4-Arm Exit Turnstile

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

60″ x .135″ x 40,000Lbs Yoder Slitting Line Material Width: 12″ – 60″ Material Thickness: .010″ – .135″ Weight Capacity: 40,000Lbs Coil ID: 20″-24″ Coil OD: 72″ Pull Through Design Entry Coil Car Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Slitting Head with Gear Box and AC Feed-Up Motor Single Scrap Winder Recoiler with Over-Arm Separator DC Motor Drive Exit Turnstile Electrics, Hydraulics, Controls

72″ x .187″ x 50000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

CNC round seam welding machine make CLOOS type CD 500 / SR / 4LB / IA / BFabr. -No: 10005, wiring diagram -No: 86516 year 1986Center height: 450 mmTurntable diameter: 600 mTip width: 1500 mmDimensions L x W x H approx: 3000 x 1000 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Manufacturer: Maier Type: ML 36 D Year of construction: 2005 Control: GE Fanuc 3li TA Drive power: 16 kw Machining diameter: 36 mm Headstock stroke max.: 220-450 mm Speed: 0-8000 rpm. Number of tool stations: 4 Machine weight: approx. 5 t

boring depht: 220 mm; drilling length: 340 mm; height adjustment: 145 mm; drilling head tiltable: -60° bis +60°; mieter fence adjustable: 30° - 90°; motor power: 1,5 / 1,9 kW; speed: 1400 / 2850 U/min; suction connection: 100 mm; machine length: 1200 mm; machine width: 1050 mm; weight: 240 kg; The top model of the LBM range features a drill head tilting 60° to the right and left, making it the perfect solution for assemblies around staircases, window and frame works. The motor is moved single handed and the work table is mounted firmly which allows for processing of oversize workpieces such as doors for example. Properties Maintenance-free linear guiding allows for feed of drill depth Quick lift system allows for effi cient, economical processing without time-consuming winding of crank Smooth, stepless height setting of drill head features fi ne adjustment and ...

Paxson Loop Slitting Line 72″ x 0.375″ x 50,000Lb (A3754) Make: Paxson Material Width: 12″ – 72″ Weight Capacity: 50,000Lb Thickness: .050″ – .375″ Coil ID: 20″ – 30″ Coil OD: 72″ Line Speed: 850 feet per minute Direction: Right to Left Entry L-Type Coil Car Floor Standing Design Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Water Cooled Brake Feed-Up Motor Sliding Base Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides 4-Roll Coil Breaker Mechanical Entry Crop Shear Two (2) Slitting Heads Arbor Diameter: 9″ and 12″ Crane Removable Type Adjustable Arbors 150HP DC Motor Drive Multi Speed Gear Lots of Knives and Tooling Two Pro-Eco Scrap Winders Max Thickness: .500″ 25HP Motor for Each Unit Powered Open / Close Pit Cross Over Table Drag Bo ...

Loopco Loop Slitting Line 60 x 0.125 x 40,000Lb (A3755) Make: Loopco Material Width: 12″ – 60″ Material Thickness: .010″ – .125″ Coil Weight: 40,000Lb Coil ID: 20″ Coil OD: 72″ Speed: 1200 feet per minute Mandrel Uncoiler Powered Hold Down Roll Powered Expansion Water Cooled Brake AC Feed Up Motor Sliding Base Hydraulic Peeling Table Adjustable Edge Guides Driven Pinch Rolls Three (3) Slitting Heads Arbor Diameter: 5″ Crane Removable Design Keyless and Shimless Tooling Adjustable Arbors 100HP DC Motor Drive Pit Cross Over Table Rotary & Drag Board Tension Stand DC Motor Drive Coated Tension Rolls Strip Separating Bar with Tooling Recoiler Powered Over-Arm Separator Hydraulic Push – Off Powered Gripper 125HP DC Motor Drive Exit 2-Arm Turnstile Powered Rotation ID Protective Arms Electrics, Hydraulics, Controls, Tooling, ...

Chicago Loop Slitting Line 48″ x .040″ x 40,000Lb (A3756) 48″ x .040″ x 40,000Lb Chicago Loop Slitting Line Stock#: 19650C Make; Chicago Material Width: 12″ – 48″ Material Thickness: .005″ – .040″ Coil Weight: 40,000lb Coil ID: 20″ Coil OD: 72″ Speed: 1500 feet per minute Entry 4-Arm Turnstile Powered Rotation ID Protective Arms Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Three (3) Slitting Heads Ejection Type Head Change Arbor Diameter: 4″ Lots of Knives & Tooling 50HP DC Motor Drive Scrap Baller AC Motor Drive Automatic Dumping Pit Cross Over Table Cascade Entry & Exit Rolls Rotary & Drag Board Tensi ...

60″ x .187″ x 50,000Lb Stamco Loop Slitting Line Make: Stamco Material Width: 12″ – 60″ (Recoiler Mandrel is 56″) Material Thickness: .020″ – .187″ (.135″ Stainless) Coil ID: 20″ Coil OD: 26″ – 72″ Coil Weight: 50,000Lb Direction: Left to Right Entry 4-Arm Coil Turnstile Powered Rotation Entry L-Type Coil Floor Standing Design Powered Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Air Clutch & Brake Two (2) Slitting Heads Arbor Diameter: 9″ Slitter Face Width: 56″ & 60″ Powered Arbor Adjustment Motor: 100HP DC Tooling with Tooling Rack One Scrap Winder Hydraulic Motor Powered Open / Closed Herr-Voss 6-Hi Strand Extensioner Number  ...

Bandwidth.. 870 mm Band thickness 0.2-3.0 mm Coil weight 10 to. Coil ID Unwinder... 400/508/750 mm Coil ADBewinder.. 1,500 mm Cutting performance. 110 N/mm2 Velocity 120 m/min.

56 St. Stapeljoche - used- : Price per piece ex location: 99.-€ (net) incl. loading! Primarily complete sale! Manufacturer: unknown, customer probably means LBL Type: unknown Year of construction: unknown Internal dimension approx.: 70cm Width approx.: 65cm Internal height approx.: 50cm Available: from now on Condition: good Location: 78665 Frittlingen

Octagon Loop Slitting Line 60″ x .250″ x 60,000Lb Thickness Range: .015″ – .250″ Line Speed: 1000 FPM Entry Coil ID: 20″ – 24″ Exit Coil ID: 20″ Coil OD: 72″ Weight Capacity: 60,000Lb Shear Strength: 60,000 PSI Material: Steel, Aluminum, stainless Line Direction: Left to Right Complete Line With: Entry L-Type Coil Car Floor Standing / Self Contained Hydraulics Mandrel Uncoiler 4 Leaf Hydraulic Expansion Hydraulic Sliding Base Water Cooled Brake and Cooler Feed-Up Drive Air Clutch Powered Hold Down Roll North American Edge Control Peeler Table Pinch Rolls 2 Sets of Edge Guides Crop Shear 2 Injector Style Slitter Heads 8″ Diameter Arbors Sliding Outboard Support Hydraulic Slitter Head Clamping Hydraulic Arbor Adjustment 150 HP DC Slitter Drive Shim-less Tooling 2 Scrap Winders Oscillating Wind Hydraulic Eject Looping Pit C ...

Stamco Loop Slitting Line 60″ x .135″ x 40,000Lb Make: Stamco Material Width: 12″ – 60″ Material Thickness: 010″ – .135″ (stainless), .190″ (aluminum) Coil ID: 20″ Coil OD: 72″ Direction: Right to Left Entry 4-Arm Turnstile Powered Rotation C-Hook Arm Slot Entry L-Type Floor Standing Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Drive Hydraulic Peeling Table Entry Guiding Roll Entry Mechanical Crop Shear Driven Pinch Rolls Adjustable Edge Guides Two (2) Slitting Heads Arbor Diameter: 7″ Crane Removable Heads Adjustable Arbors Motor: 75HP 1750 / 2100 RPM Lots of Knives and Tooling Two (2) Scrap Winders Hydraulic Motor Drive Powered Open / Close Pit Cross Over Table Cascade Rolls Drag Board Tension Stand  ...

Cincinnati Loop Slitting Line 48″ x 0.075″ x 20,000Lb Make: Cincinnati Material Width: 12″ – 48″ Material Thickness: .005″ – .075″ Coil Weight: 20,000lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table X-Ray System Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two (2) Slitting Heads Ejection Type Head Change Arbor Diameter: 5” Lots of Knives & Tooling 50HP DC Motor Drive Two (2) Scrap Winders Hydraulic Drive Powered Open / Close Pit Cross Over Table Rotary Type Tension Stand DC Motor Drive Coated Tension Rolls Recoiler Powered Over – Arm Separator Hydraulic Push-Off Powered Gripper 50HP DC Motor Drive Exit Single Ar ...

Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control

dowel hole drill device: yes; max depth of the slot: 165 mm; max length of the slot: 200 mm; head vertical stroke: 200 mm; motor power: 2,2 kW; speed: 2800 U/min; suction connecion: 120 mm; machine length: 1000 mm; machine width: 900 mm; machine height: 1250 mm; weight: ca. 200 kg;

Cut-to-length line Auxmet strip line Unwinding reel for max 4to coil weight Bandwidth 50-1000mm Material thickness 0.5-3mm at 600N/mm2 Line speed 60m/min Number of stripes 1-11 Reel reel up to 4to coil weight with foiling unit without knife with retrofitted photoelectric sensors The offer is aimed exclusively at traders within the meaning of §14 BGB

7 axis Cnc lathe with continuos B axis (0-135°) - Iemca Boss 338-HD/32 barfeed - 60 bar high pressure - chip conveyor - Fanuc 31i-B5 Control - in very good conditions

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Seven axis machine with turret (type 420) - with Iemca MiniBoss 325/44 (max lenght 4400 mm) - well equipped (fixed/driven tool holders, collets for barfeed and lathe, guide bushings) - chip conveyor - Fanuc 16-TC Control

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - off machine tool eye

SECOND-HAND LONGITUDINAL SANDER COMEC MOD. LON LS - CE RULES -Volt. 380/50 - S/N 970408 - Year 1997

approx. 2,700 longitudinal bracing, for longitudinal bracing as an alternative to cross bracing, LV 3134 for span length 1,282mm – used - : Price per piece ex site: only 4.- € (net)! 4 pieces are needed per field! Manufacturer: SSI Schaefer Type: LV 3134 Year of construction: 2021 Field length 1,282mm Shelf height 40mm Original price per piece: approx. 12.-€ (net) Longitudinal braces Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross braces in the double rack interfere with storage or if both sides are to be operated in the single rack. In order to ensure subsequent height adjustability, the frame distance for double racks must be at least 30 mm. In each shelf space of a rack row, the lower and upper shelves are to be provided with 2 longitudinal supports (for shelf heights up to 2967 mm). The form-fittin ...

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

approx. 800 pieces of longitudinal braces for R8000, for longitudinal bracing as an alternative to the cross bracing for span length: 994mm – used - : Price per piece ex site: only 3.- € (net)! 4 pieces are needed per field! Manufacturer: SSI Schaefer Type: LV 8000 Year of manufacture: unknown Field Length: 994 (mm) Shelf height: 30 (mm) Original price per piece: approx. 12.-€ (net) Longitudinal braces Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross braces in the double rack interfere with storage or if both sides are to be operated in the single rack. In order to ensure subsequent height adjustability, the frame distance for double racks must be at least 30 mm. In each shelf space of a rack row, the lower and upper shelves are to be provided with 2 longitudinal supports (for shelf heights up to 2967 mm ...

Longitudinal X: 6000 mm Radius: 100 mm Drilling capacity: 100 mm Spindle taper: 100   CNC Brand: Siemens CNC Model: 840D incl. Boring shaft   75 x 5900 incl. Boring shaft   94 x 5900 incl. Boring shaft 106 x 5900 incl. Boring shaft 130 x 5900  Max. drill Ø steel:250mm Spindle bore:      100mm Drilling depth:    6000mm Power on spindle:  63kW Speeds / ranges:   750Rpm Length:            18000mm Width:             3800mm Height:            2100mm Weight:            35000kg