long used for sale

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Trimming saw Wurster & Dietz Type: FR 7 Passage width 800 mm Cutting height 160 mm with saw blade diameter 500 mm Cutting height 140 mm with saw blade diameter 450 mm Cutting height 120 mm with saw blade diameter 300 mm Motor 22 kW Adjustable slatted bushing Hydraulic feed 0 – 70 m/min. Hydraulic roller lifting Input roller conveyor 6 meters long with 6 rollers, with rods for adjustment of cutting height and speed and batten bushing Output roller conveyor 6.5 m long with push-off in the form of spiral rolls for side goods new spare drive belt complete with operating instructions and wiring diagram Condition: Technically perfect, cleaned and repainted Total weight approx. 5 to. (Trimming saw 3 tons. and roller conveyors and rest 2 tons.) Installation length approx. 15.5 m Loading dimensions: approx. 6.5 loading meters

(slitter / cutter / creaser) M. No.: 081058130 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm

Code 221213 Description Centrelathe Make P.B.R. Type T - 450 Serial No. 45 / 216 Year 1983 Distance between centers 2000 mm Swing over bed 920 mm Swing in gap 1200 mm Swing over support 630 mm Spindle bore 130 mm Number of spindle speeds 24 Spindle speeds 5 - 1000 rpm Feeds Long, cross and toolpost Rapides Long, cross and toolpost Motor power 22 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries Cooling equipment Lubrification Fixed steady of 400 mm Toolpost 3 jaw chuck of 500 mm Condition Machine is in good condition

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Pretzel plant (to Manuel Schlingen) Plant consisting of: - High conveyor belt for dough pieces (can be crosswise from a roll head machine be fed. - Winder Erka with long-acting board for pretzel - Sling table Mass: High conveyor belt (L=2100 mm, W=700 mm, height=1680 mm) Transfer width head machine: 700 mm Mass winder with long-acting device (L=2450 mm, W= 1150 mm, H= 1500 mm) Dimensions of loop table (L0 3850 mm, W= 1150 mm, H= 920 mm ) Belt width: 500 mm Table: Frequency controlled All devices in good condition, technically tested

weight: 540 kg diameter: 1200 mm height: 1100 mm 0: 350 l total power requirement: 1,9 kW voltage: 350/50 V length in total: 1820 mm - with integrated manual separation ramp - control panel - Dosing pump for liquids - Capacity 382 liters - A soundproofing cover is also offered at extra cost! Sound insulation cover for VKUE 200 + The cover is controlled by a pneumatic piston + While the machine is running, the soundproof cover ensures for significant noise reduction. + It also prevents splashing of water or abrasives + It reduces noise emissions to less than 80 decibels. + The connection requires 6 bar General description: Our vibratory finishing system is suitable for: roughening, removing paint, decoating, deburring, derusting, descaling, de-oiling/degreasing, grinding as well as polishing and smoothing. The can also be used for non-metallic materials machine are used. Depending on the  ...

MHS brand steak, model PCE70/21 is for sale. Used equipment completely rebuilt and overhauled (re-release). It is a meat slicing machine with or without bone, it is also suitable for other types of products such as fish. The benefit of this type of machine is that it achieves homogeneous and constant cuts, so quality is achieved in production. Characteristics: cut from 3 mm to 5 cm depending on bone, temperature of the product to be cut is from -10 degrees to +3 degrees. Voltage: 3F+T+N, frequency 50HZ, current 5.5 A. Ease of handling and cleaning. Constructed of stainless steel in its entirety. External dimensions of the machine: 1860 mm long x 850 mm wide x 1230 mm high. Product drawer dimensions: 210mm high x 210mm wide x 700mm long. Steak, tenderloin slicer, chop slicer, pork slicer, steak slicer. OCCASION. NEGOTIABLE PRICE. Transport costs to be borne by the buyer. If you need any i ...

• DIBAL MD-3500 600X400 reject metal detector. Designed with ease of operation, low maintenance and cost. • Metal detectors are considered a critical control point (CCP) in HACCP programs and require detection checks to make sure they meet their standards. Smart Guide conducts detection and operation checks in an easy-to-understand format. It can be configured to stop operation if the test fails and ensures compliance. • Confirmation of rejection Contaminated products must not only be detected but also properly rejected. Rejection confirmation ensures that rejected products are completely removed from the production line. • Detection arch measurements: 600 mm wide x 240 mm high x 460 mm wide. • External dimensions of the machine: 2040 mm long x 1100 mm wide x 1600 mm high. • Ribbon size: 2040 mm long x 500 mm wide (hinges) •OCCASION. NEGOTIABLE PRICE. Transport costs ...

• FATOSA automatic chopper model PA-130. • Automatic feeding system by loading hopper and tapered feeding spindle, to output spindle, plate carrier and cutting blades. • Perfect chopping without rubbing or bruising, characteristics that, together with its great robustness, make it stand out from the rest of the machines on the market. • The machine is designed for mincing meat, fish, vegetables... • The minimum temperature at which the products to be chopped can be will depend on the motor power chosen, the diameter of the holes in the outlet plate and the combination of plates and blades that has been mounted. • Push-button control panel. • General power switch • Made entirely of AISI-304 stainless steel • Gearbox transmission with hardened and ground shafts, mounted on bearings and gears in oil bath. Alloy steel knife shaft suitable for bending and torsional ...

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/30 -EB 2 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty More bakery machines in stock!

Machine type MIG/MAG welding system Brand MERKLE Type M 3000 K Appendix No. 34.663 Supply voltage 3 x 400 volts Setting range 25 – 280 amperes Duty cycle 50 % ED at 280 amps 60% ED at 250 amps 100% ED at 200 amps Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive DV 20 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age approx. 15 years Condition workshop-tested good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 25 sq m 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN  ...

Machine type MIG/MAG welding system Brand Merkle Type SpeedMIG touch 450 KW Appendix No. 120.420 Supply voltage 3 x 400 volts Adjustment range 20 – 450 Ampere Duty cycle 60 % ED at 450 amps 100% ED at 360 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feeder 4-roller drive DV 26 Fuse 32 Ampere Special accessories touchpad DeepARC ColdMIG HighUP Dimensions L x W x H 1,050 x 450 x 890 mm Weight 180 kg Age 4 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 qmm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box, kpl. Equipped 1 pair of welding  ...

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Turning diameter: 840 mm Turning length: 3175 mm Turret positions: 12 Positions ATC: 12   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: Mazatrol Matrix Nexus Ideal for the energy, heavy vehicle, and other large component industries, the Quick Turn Nexus 450-II MY and optional tailstock-mounted Long Vertical Mill, which features a 1,150mm boring bar with a special bolt-on angle head, can deliver deep-hole boring to depths of 1,039mm and perform inside diameter milling operations, such as internal keyways and internal drilling. The machine’s rigid construction also provides high-precision machining over long periods of time.The Quick Turn Nexus 450-II MY’s headstock features a 457mm chuck, mounted on a 40 kW with 2,000rpm integrated spindle motor for heavy-duty metal removal. The spindle also serves as a C-axis, capable of being indexed at 0.0001° increments to accurat ...

sheet width: 2550 mm plate thickness: 4,0 mm distance between columns: 2600 mm back stop - adjustable: 750 mm no. of strokes: 42 Hub/min cutting angle: 1°30 table width: 450 mm table height: 800 mm total power requirement: 7,5 kW weight of the machine ca.: 3230 kg dimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition () Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion - manual cutting gap adjustment, from the front analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball ...

Machine Product: Universal length measuring instruments with a direct measuring range over the entire length of the device. Comparator with horizontal base bed (hard rock with high homogeneity and rigidity) X-axis measuring system: Incremental, high-precision Heidenhain length measuring system, 100 mm long in the measuring element incremental Heidenhain incident light measurement systems over the entire length of the base bed to the left and right of the stage in the base bed Z-axis measuring system: INCREMENTAL, high-accuracy RENISHAW length measuring system, 80 mm long Product: • Standard software 828 WIN ULM "Free Measuring" • PC evaluation unit (without monitor) • Pair of measuring brackets, immersion depth 14mm (0.55 inch) • 2 parallel clamping claws 60/20 • 2 quick-release claws • 2 measuring attachments with spherical zone • Setting gauge 2 • W ...

Boiler capacity: 270l; Flow rate: 520l/min; Motor power: 4 kW; Refrigerant dryer: Yes; Stationary compressors with vertical 270 l tank Maximum performance in the tightest of spaces. Robust equipment and best quality Fully automatic on-switch operation With all safety devices Completely ready for connection  From 7.5 kW as standard with automatic star-delta switch  Fifteen-year warranty against rust penetration on inside and outside hot-dip galvanized compressed air tank quality electric motor Quality electric motor with high tightening torque is equipped with a motor protection switch start-up capacitor and start-up relief valve ensure easy start standard with phase changer for easy manual reversal of direction of rotation compressed air compression via high-performance unit HOS Start-up relief valve ensures easy, pressure-free start The two-cylinder high-performance engine made ...

Combi sheeting machine Second-hand machine - overhauled by a specialist 6 months warranty at call Properties: + mobile combination sheeting machine + Year of construction 1999, workshop overhauled 2023 + suitable for all types of dough for rolling out and touring + equipped with new felt and linen tapes and scrapers + equipped with extendable roll-out table as an extension + all relevant parts have been refelted + with flour container + with trawl net & corrugated mat for beating dough pieces, rolls or breads + with long roll station at the bottom for all doughs for long rolling + Carrier belt for high transport (approx. 83 cm height) of the elongated rolled dough pieces + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker + comes with instruction  ...

Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...

Gebr. Kemper bread plant, overhauled, with round and long knitting Kemper Superba SU-BR-2500G, 270 cm long round beam, with Kemper BE-13 bucket elevator

It is a used, reconditioned Seewer Rondo Kombi sheeter SKO 67 for sale. The machine is fully functional, new belts are assembled before delivery. The combined dough sheeter is suitable for all types of dough, turing and rolling out for long-working bread of all types of bread dough, rye, wheat and mixed bread doughs with a straight end, for long-rolling plait, pretzel sticks as well as knitting Parisian bread and caviar sticks. Ribs can also be made. Sandwich dough pieces are rolled out and hammered in. Specifications: - with pull-out tape - has manual, infinitely variable roller adjustment - Synchronous gear prevents jamming, shrinking or tearing of the dough sheet - Length for rolling out (working position) 2500mm - Connection: 400V, 16A-CEE plug Price on request.

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2250 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: manually; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: continuous; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 695; Ideal for demanding craftsmen and carpenters The extra-long dressing tables made of one piece make it easy to dress the workpieces Work tables are made of grey cast iron, making them insensitive and permanently flat Dressing tables to the rear, opening at the same time with t ...

Round and long knitting Year of construction: 2012 Weight range 500 - 2,000 g / piece Hourly output 800 - 2,000 pieces Ribbon knitter 250cm effective length Adjustable crim inclination Long knitting up to max. product length 50cm Effective distance 170cm Stainless steel incl. 2 flourers COMING SOON Tested and cleaned Straps new

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

turning diameter over bed: 20 mm spindle passage: 24 mm turning length: 180 mm turning diameter: 20 mm control: Traub System TX 8i-s turning speeds: 10000 U/min c-axis: 0,001° c-axis: 0,001 ° gripping station: 20 mm speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 2 x 8 high-pressure pump: 130 bar total power requirement: 2,2/3,7 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2,5 x 1,5 x 2,25 m driven tools: 6+4+4 Rev+S7+S8 fire distinguisher: parts conveyor: CNC long lathe Traub TNL 18, year of construction 2011 and 2012, without loading magazine can be used as long lathe and short lathe 2 pieces immediately available, from medical technology super condition, very well equipped Sale due to type adjustment. If you buy two identical machines you get a package price 7+2x C-axes, main and counter spindle, 2 turrets UPPER TURRET - positions 8 - number o ...

Loaf bread plant. Year of construction: 2005-2014 Achievement: - Dough weight: box of long breads from 11,000 - 12,500 grams - Dough weight box normal: from 880 - 1180 grams - Hourly output: 3200 - 4150 loaves/h - Hourly output at 1000 grams = 3740 loaves of bread/h composed of: - Diosna Linear kneading system with 2 x Diosna W 240 A spiral mixer - Diosna lifting tipper - Benier Long Roller ME 600 - Kaak fermentation room - Kaak furnace loader - W.P. Mesh belt furnace NUN 3000/60 - Kaak furnace unloader - Kaak Auskühturm - Kaak bandage turner - Kaak Kippentkapsler - Kaak brush machine - Kaak transport system with return - GEA Freezing Spiral Freezer - Fuji High-Speed Horizontal Form-Fill-Seal Packaging year 2014

AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-100a - Gathering tower VAC-100m - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-100a / Horizon VAC-100m / VAC-100m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1,86kW - ...

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased.  Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l

Thermostat, temperature monitor, with long-distance cable and rotary sensor JUMO ATH-2 372603 Temperature range: -20 +50°C approx. 1.0 m long-distance cable Round sensor: Ø 6 x135 mm Switching capacity: 230 V AC, 10 (2) A IP54 New Dimensions ( without transmission line and rotary sensor ) : 100 x 65 x 80 mm

Clamping technology set, tool holder, reducing sleeve, grain tip WMW 4 x reducing sleeve: SK 50 to SK 30, SK 40, MK 3 and to MK 5 2 x fixed grain tip SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long used, tested ! Dimensions (packaging): 330 x 220 x 440 mm

3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-60a / Horizon VAC-60m / VAC-60m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50 ...

Long roller + depositing device for bread roll system for round + long rolls, Fabr. König, Type Schr KB

Key data: 6500 mm, 2000 mm, 6000 W

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

Bread roll line Dough sheet line for angular and elongated products Dough feeding belt Pre-portioner Head machine incl. div cutting rollers with baguette long-knitting station - Incl. 2 knitting drums (1-r long + 2-r short) with stump station - incl. 2 diamond stumblers / + // or average Humidification and sprinkling station Year of construction: 2017 - With intermediate belt and lattice belt immersion bath - simple sprinkling station with 2 seed containers (coarse/fine) Deduction - 4x60/40 or 2x60/80 planks or sheets Disassembled, not overhauled or cleaned from the Rottenburg warehouse immediately available in bakery condition

Precision Hydraulic Double-Sided Auto Feed Cutter CSS-806 Pressure: 190 tons Main motor: 7.5 kW Effective area: 2100x1300 kg Dimensions of machinery LxWxH: 4800x3050x2170 mm Pressing Distance: 5250 mm Weght aprox.: 17000 kg Function of the Machine: - Electronic industries: Optical films, PET, optical adhesive, general tapes, light shading material, foams, etc. - Traditional industries: Prototyping and die cutting machine for stationery, vacuum forming, double blister, footwear, EVA foam disposable plates, puzzles, leather, vinyl tile flooring, oil seals, etc. The machine body is made of high tensile steel that has undergone the annealing process to relieve stress. It will never deform even after long term use. The rotating disk of the cutting plank is capable of reducing wear and tear to extend the life of cutter. With ultra precision oil circuit, the machine move ...

LIQUIDATION of horizontal packaging machine for small size products. The PYMAR packer, model MINI, has been designed to pack muffins, biscuits, sequillos and tray products. Desktop equipment for flow pack packaging in medium productions. Electrical power 380V, TRIFASICA, 50Hz, kw1. Maximum package dimensions: 160 mm long x 50 mm wide x 40 mm high. External measurements of the machine: 1450 mm long x 660 mm wide x 720 mm high. Weight 80kg. Horizontal packaging machine, flow pack, Flowpack, bagger, packaging machinery. Equipment fully revised, conditioned and guaranteed

Retraction tunnel from the manufacturer CMA Macchine automatiche, model TR350, for coupling to any packaging machine. High quality equipment. Used equipment, its condition is excellent, fully restored and with guarantee. External dimensions 2010 mm long x 1500 mm wide x 1360 mm high, work tape height 800 mm. Tunnel mouth measurements 430 mm wide x 290 mm high. Support tape measures 2010 mm long x 300 mm wide x 780 mm working height. Electrical power 400V + N + T, 50Hz, 19Kw. Retraction tunnel, retractable tunnel, retract furnace, shrink tunnel, Its condition is excellent re-release. Equipment reviewed and guaranteed.

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

Sheeting Machine Combi Seewer Rondo Model: SKO 68 for all doughs for rolling out and touring Infinitely variable roller adjustment Extendable table left, belt width 635 mm Roll opening 0.3 to 45 mm Active pressure plate with manual adjustment Long roller / long knitter at the bottom with train for wrapped products Mobile dough sheeter with brake with 3-speed automatic transmission top flour container DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty Many more bakery machines in stock!

Sheeting Machine Combi Rondo Doge TOP Model: SKO 611 for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roll opening 0.3 to 45 mm Active pressure plate with handwheel adjustment with long roller / long knitter at the bottom with train for wrapped products Mobile dough sheeter with brake all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty Lots of bakery equipment in stock!

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L ...

Machine Type: Pulse-Arc Inverter Welding Machine Make MERKLE Type HighPULSE touch 450 DW Plant no.: 125.127 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 60% ED at 450 amps 100% ED at 360 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 31, speedometer motor Fuse protection 32 amps Dimensions L x W x H 1,210 x 430 x 1,100 mm Weight 123 kg Age 3 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 504 W, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 ...