We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,626 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Silver hose, fuel hose, with long pipe fitting, 10 pieces PAGUS NW6 Total length: 2015 mm Length between pipe fittings: 1950 mm Silver hose: Outer diameter: Ø 13,5 mm Material (braiding): galvanized steel wire 2x hose nipple with pipe fitting diameter (pipe socket): Ø 6 / 8 mm ( inside / outside ) length (pipe socket ): 30 mm Material: Steel, galvanized 2x hose sleeve for low pressure hose DN6 Material: galvanized steel Other quantities on request ! New ! Dimensions ( packaging ): 400 x 400 x 100 mm
used
Long punch, punch, hand lever punch SYKON 2859 punching tool: Ø 5,5 x 60 mm / 2x Ø 5.5 mm punching stroke: 20 mm projection ( without table ): 55 mm distance table hold-down: 5 mm Table surface: 125 x 64 mm used, tested ! Dimensions: 200 x 145 x 1030 mm
used
Socomec long belt grinding machine (Ref. No. 279-2664) Table size: 2400 x 1200 mm Lifting height: 450 mm Hubart: Electronic Sandpaper: 6900 mm length Suction: 2 pieces left and right The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar
used
CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...
used
Key data: 16
Star SA 16 R, year 06/2001 Loading magazine FMB Minimac 3200 "A" year 2001 Machining diameter: up to 16 mm With tapping spindle 4 quills for front/back processing 3 driven cross tools
used
Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532
used
Bread long knitting machine, Fabr. Benier, Type B0 - 78
used
Bread long knitting machine, Fabr. Winkler, Combi-Langroller
used
Brötchenlangwirkm. Fabr. Frilado, Type ANL
used
Brötchenlangwirkm. Fabr. Frilado, ANL
used
Brötchenlangwirkm. Frilado, ANL-S
used
Long-knitting machine Fabr. Kemper, Type SU-L
used
Toastbrot-Langwarkmaschine, Fabr. Benier, Type MI 600 with 4 four pieces furnishing,
used
Type 330 - Iemca Boss 542/32 new in 1997 - chip conveyor - Fanuc 16TB Control - the machine has always worked with oil
used
serial no.Q16521 - Iemca Boss 332E-r/32 new in 2009 - drilling milling head (GSE 11107) - chip conveyor - Mitsubishi Meldas 700/730LUC? Control.
used
CNC Model: Fanuc - CNC Version: 31i - MODEL B - Main spindle power: 3,7Kw Main spindle bar clearance: 20mm - Headstock stroke (Z1): 205mm - Number of spindle revolutions: 10000 Number of linear axes: 6 Number of fixed tool spaces for tool plates: 13 Number of motorized tool plate spaces: 6 Rapid feeds linear axes X Y Z: 35m/min High cooling pressure: yes Pressure value: 20bar Counter-spindle: yes Number of counter-spindle revolutions: 10000 Power versus spindle: 3,7Kw Bar clearance: 20mm Fixed counter-spindle front tools: 2 Number of motorized rear tools: 8 Refrigerant used: emulsion Model and brand bar magazine: Iemca 332 E Chip evacuator: carpet Other technical data: Manually adjustable angular rostrum Machine equipment: Set of fixed and motorized tool holders :::D IMENSIONS AND WEIGHT::: Length: 2334mm Width: 1200mm Heigh ...
used
Code: 0138 Brand: SOCOMEC Model: LN 260 - CE Standard Belt sanding machine with double goose neck for wood, furniture, steel, aluminium, metals, plastics etc. - CE Standard Technical data: Table length mm 2600 Table width mm 800 Vertical table stroke mm 570 Gooseneck height mm 700 Pulley diameter mm 250 Main motor Hp 4 Speed rpm 1400 Belt width mm 120/150 Belt length mm 7050 Belt rotation reversal Suction mouth diameter mm 120 Overall dimensions mm 3600 x 900 x 1400 h Weight kg 460
used
Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm
used
5 axis Swiss lathe with moving bushing - bar capacity 36 mm - 87 collets - 2 driven spindles - brand new Mitsubishi Ac servo amplifier mod. MR-J2S-70A - Barload mod.BFG 35 barfeed new in 2007 - chip conveyor - long parts ejecton - manuals - Syntec Control
used
Type 660 - Iemca Boss 332E/32L new in 2005 - machine that has ever worked in oil - Fanuc 18i-TB Control
used
Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985
used
Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,
used
Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993
used
Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991
used
Manufacturer: Heesemann, Type: Hochglanzpolierautomat BA 2, Year: 1989, Belt length mm: ca.9500, Sanding hight mm: ca.200, Table width mm: 1350, Table length: 2530, Sanding belt engine kW: 11/15, Fan for chips: yes, 2 rotary directions: yes, Stop straightedge: yes, Presentation possible: yes, FREE TEXT: Saugspann Anlage/Bandstrahleinrichtung/ Frequenzregelung Schleifband/Schaltschrank Neu, Year :1989
used
Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992
used
Long belt sander Motor 4 kW Professional machine, runs perfectly, in good condition, ready for operation Sold due to lack of space Transportation by buyer Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
used
Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
used
Traub TNL 12 - 7, Built in 2006, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
used
equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control
used
This machine was powered only by oil. General: Year of construction 2011 Control Fanuc Series 18i TB Main spindle 15,000 rpm Counter spindle 10,000 rpm Rod diameter max. 10 mm Rapid traverses 35 m/min Dimensions: 1,860 x 780 mm x 1,500 mm Weight 1,500 kg Other equipment and accessories: C-axis Part ejector Coolant tank Kraft & Bauer extinguishing system Bar feeder FMB micromag 3200
used
General: Built in 1999 Control Fanuc Series 16T Working spindle 500 – 10,000 rpm Turning diameter 20 mm Headstock stroke max. 205 mm Dimensions: 2,670 mm x 1,375 mm x 1,650 mm Weight 3,400 kg Further technical data: Express feed X, Y: 15,000 rpm Express feed A, B: 15,000 rpm Rapid feed Z1, Z2, E: 18,000 rpm Rapid feed C: 90,000 °/min Smallest input unit: 0.001 mm Smallest input unit C-axis: 0.001° Other equipment and accessories: Conveyor Bar feeder FMB turbo 3-26-3200
used
Gebr. Long belt sander JOHANNSEN T93 YOC 1994 Motor power: 4.0 kW Table size: 278 x 80 cm electr. Table Lift Hinge dimensions: 150 x 7,400 mm Suction connection: 180 mm Offsetting (right): 450 x 220 mm Table support (wood) renewed Dimensions: 220 x 395 cm Weight: 550 kg
used
Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...
used
Sliding head lathe Tornos Sigma 20 :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 31i - Model A - Main Spindle Power: 5,5Kw - Main Spindle Bar Clearance: 20mm Headstock stroke (Z1): 230mm - Main spindle speed: 10000 - Number of linear axes: 6 - Number of fixed tool positions on tool plate: 6 Number of driven tool holder plate tool slots: 8 Rapid feeds for linear axes X Y Z: 30m/min High refrigerant pressure: yes Sub-spindle: yes Sub-spindle speed: 10000 Power against spindle: 5.5Kw Bar clearance: 20mm Number of fixed rear tools: 6 Number of motorized rear tools: 3 Refrigerant Used: Neat Oil Bar loader model and brand: Robobar SBF - 532 Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 1380mm Height: 2050mm Weight: 3000kg
used
Longitudinal carriage, chassis, welding carriage, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner, welding tractor -Stable, compact and modular design -4-wheel drive via stepper motor -Wheels with polyurethane treads -Excellent directional stability -Viscose damper for constant driving -Integrated position measuring system -Reinforcement frame with mounting spigot for wire feed -4 pieces of lifting eyes -Power supply and PLC power unit integrated in the chassis -Power cord with plug: 12 m -Control line to the power source: 10 m -Incl. Hose package
used
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg
used
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 560 mm -long jaws -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg
used
Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg / piece
used
Code: 0179 Brand: EMME ELLE Model: GLC 1200 - CE Standard Longitudinal splicer for glue veneer - CE Standard Technical data: Veneer width mm 45-1200 Minimum veneer length mm 360 Veneer thickness mm 0,4-2 Feed speed mt/min 10-40 Heating temperature max 240 degrees Heating zone length mm 1200 Electric power Kw 6 Type of glue: ureic Working height mm 800 Overall dimensions mm 2600 x 2000 x 1800 h Weight kg 2000
used
Gildemeister GD 16-5 - Top condition!, - Synchronized Guide bush, - 3off life tools slide 1, - rear working, - swarf conveyeor, - oil mist filter, - bar loader Iemca Smart 316
used
Inv. Num. : 7175 Type: DECO-2000/13 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 13 mm Number of synchronized axes: 10 pieces Maximum spindle speed: 10,000 1/min Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: 3000 kg Equipment: Robobar SSF 226 Bar Feeder (2000)
used
Band width: 150mm; Table size: approx. 2800mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3900mm; Machine width: 1200mm; Weight: 500kg;
used
Gebr. CNC longitudinal lathe Citizen L520-VII, YOC 2003 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front hand, rear machining), parts conveyor belt, Fire extinguishing system Conveyor Loading magazine IEMCA BOSS 432r The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!
used
Inv. Num. : 7174 Type: DECO-2000/10 Producer: Tornos Created: 2001 Parameters: Control system: FANUC PNC DECO Max. rod diameter: 10 mm Maximum bar length: 2000 mm Maximum turning length: 180 mm Maximum turning diameter over bed: 200 mm Maximum spindle speed: 12000 1/min Length: 2000 mm Width: 1010 mm Height: 1950 mm Weight: 1500 kg Equipment: Robobar SSF 226 Bar Feeder (2000)
used
Gebr. Long belt sander JOHANNSEN T88 Engine power: 7.5 hp (5.5 kW) Table size: 295 x 95 cm Table height adjustment via handwheel Sanding belt dimensions: 150 x 7,700 mm Depth of offset (right): 115 cm incl. various sandpaper Suction connection: 180 mm + 120 mm incl. various sandpaper Machine dimensions without grinding table (approx. dimensions): L: 410 cm W: 170 cm H: 150 cm Weight: approx. 850 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.
used
Used long belt sander Int. Art. Ref. m3501 Manufacturer: Bütfering Type Table size approx. 2,400x800mm Location: 59425 Unna The machine is welcome to be visited. The machine is currently not energized ! A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. ...
used
5 axis Cnc lathe with moving bushing - Iemca Boss 332E/32 barfeed - Syntec Control