log sorting line used for sale

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

Velati Salami Line existing • Grinder BBTMR 220 • Salt-Band/Spice • Vacuum paddle mash EEC1 • Year 1999

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHorizontal machining centre - Horizontal milling head - Chip trough with integrated Coolant tank 300 l / 130 gallo; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross1050 mmLongitudinal800 mmVertical1000 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BAdditional T-slot pallet 630 mm x 630 mmAdditional T-slot pallet 630 mm x 630 mm / 24.8 in x 24.8 in T-slots 14 mm / 0,55 in, clamping surface following DIN 55201-A2Clamping hydraulics 2/4 channe ...

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - / Contact us at -

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck

CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16

- Touch Screen Monitor - Autotrim - Air table - Side air tables, left / right - Air corners - Lift LW 1000-4, 2000 - Jogger RA-4, 2006 mit Waage - Transomat TR130EL-4, 2008 - Spare knife

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Vario Viso Angle adjustment 2 x 0 - 100° on two sides adjustable Max. drive speed 13.760 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,09 Turning direction left/right Torque max. 22 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm, Pitch circle 45mm and 52mm

CNC unit for moulding or saw blade package Brand: Atemag Type: Ultra Line Mega Cutter Position of tool spindle 90° Max. drive speed 12,000 R.P.M. Max. tool spindle speed 7.690 R.P.M. Gear ratio i = 1:0,641 Turning direction left/right Torque max. 22 Nm Tool interfaces: arbour with 30mm diameter, 120 clamping length, max. tool diameter 160mm - without tools -

Non Returnable High-Speed Glass Bottle Beer Filling & Packaging Line General Overview High-capacity and fully integrated beer bottling and packaging line designed for efficient processing of multiple glass bottle formats and packaging configurations. The line combines advanced automation, hygienic construction, and world-class machinery from leading manufacturers to ensure maximum performance, flexibility, and reliability. Key Production Capacities Nominal Speed (Bottles per Hour) 25 cl: 40,000 bottles/hour 33 cl: 35,000 bottles/hour 50 cl: 30,000 bottles/hour Bottle Formats 25 cl 30 cl 33 cl 50 cl Packaging Formats 25 cl Formats 4 x 6 x 25 cl 1 x 12 x 25 cl 24 x 25 cl 30 cl Formats 24 x 30 cl 33 cl Formats 4 x 6 x 33 cl 6 x 4 x 33 cl 1 x 12 x 33 cl 24 x 33 cl 50 cl Formats 20 x 50 cl Line Characteristics & Features Design & Engineering Transparent See Th ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

cutting diameter: 230 mm cutting speed: 35 - 70 m/min cutting width: 260 x 200 mm : mm saw band length: 2720 x 27 x 0,9 mm total power requirement: 1,1 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,8 x 1,8 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 linear With Fanuc 31i controller Year of Make: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 80 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke Z 2 : 300 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 Pos. Tool Holder 12 x 12 5 rotating tools including spindles with clamp holder ESX 16 SLIDE 2 Stroke x 2 : 240 mm 4 position tool holder for external machining with connection 12 x 12 4 position tool holder for internal machining diameter 20 mm 5 rotating tools including spindles with clamp holder ESX 16 6 + 2 axes, 2 Y axes as standard Linear actuator for maximum precision With the following accessories: Full protection cab with interior lighting Various tool holders C axis for main and counter spindle Bar Feeder L ...

Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

This is a stainless steel construction compact pita line by SalTek Bakery Equipment. It makes the thin Lebanese pita bread and the slightly thicker Egyptian pita bread. It comes with its stainless steel hood with make-up air unit. Line includes dough divider, 1st proofer, sheeter, 2nd proofer, oven, hood, make-ap air unit, cooling conveyor. Can provide help with start up of the line.

Key data: 324 mm, 600 mm

Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 1/min C-axis Max. bar passage: 65 mm Travel: X= 260, Z= 630 mm 12-station turret (all driven, max. 4,500 rpm) Tailstock Tailstock stroke: 580 mm Chip conveyor Dimensions LxWxH: 3500 x 2440 x 2100 mm (without chip conveyor) Weight: 6,000 kg Switch-on hours: 32,600 h Spindle hours: 7,600 h

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1900 mm surface area: 6000x2500 mm control: Siemens type: 840D Tool changer: 40 chip conveyor: Richter b-axis: +/- 110 ° c-axis: 360° 0 turning speeds: 24000 U/min spindle taper:: HSK 63 spindle drive: 25 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and ther ...

900 mm wide Breyer sheet coextrusion line for PP/PS:, Refurbished in 2011., 3 component Dosing Mixing Station, Main Extruder, diameter 120 mm L/D 32, 350 - 375 kg/ hr through-put., Coextruder diameter 90 mm L/D 32, 300 - 350 kg/ hr through-put., 6 x Zone Electrically heated fan cooled barrel., Both Extruders with Hydraulic Double Pot type screen changers with Hydraulic Power Pack., Both Extruders equipped with EXTREX Melt-Pumps, ABA Configuration Adapter, Breyer 900 mm wide Inclined flex lip sheet Die. Thickness Range 0.5 mm to 2 mm, 1200 mm wide Breyer 5-Roll Polished Chrome cooling stack, with 670 mm, 400 mm, 400 mm dia. Rolls, Driven by individual Indramat Servo Motors, 2 x Extra Rolls available but not installed on the Stack, Roller Conveyor, 2 x Rubber Roll nip Take-off., Pump group with heat exchangers for roll cooling., Breyer double station haul off with circuler knife shear cut  ...

x-travel: 3.600 mm y-travel: 920 mm z-travel: 820 mm control: iTNC530 Heidenhain B - axis: +/- 90 x 1 ° C-axis: 360 x 0,001 ° feed X/Y/Z-axis: 1 - 20.000 mm/min rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 60 m/min rapid traverse Z-axis: 60 m/min spindle turning speed - stepless: 20 - 10.000 U/min tool taper: SK50 power capacity at 100 % load: 32,00 kW power capacity at 40 % load: 48,00 KW max. torque at 40% / 100% load: 294 / 196 kW table surface area: 4.200 x 900 mm number of T-slots: 9 T-slot - distance: 100 mm T-slots: 1x 18H7 / 8x 18H12 table load capacity - central/maximum: 4.200 kg tool magazin:: 80 tool diameter: 115 mm wotkpiece diameter with 2 vacant positions: 160 mm tool length - max.: 360 mm weight of tools max.: 12,00 kg total power requirement: 85,00 kW weight of the machine ca.: 32,00 t dimensions of the machine ca.: 11,50 x 6,60 x H3,30 m Vertical machining  ...

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm c-axis: 360 ° b-axis: +10 / -110 ° control: Heidenhain iTNC 530 : : 42000 min/-1 : 20 / 15 kW table surface area: dia 750 mm max. table load: 800 kg : : 30 pos. tool taper: HSK E 50 feeds:: feed speeds: max. 90.000 mm/min rapid traverse: 90 m/min total power requirement: 73 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 3,3 x 2,9 x 3,1 m High dynamic 5-Axis-Precision Center equipped with: - CNC ControlHeidenhein iTNC 530 - ATC 30-fold (HSK E50) - Chip Conveyor approx 57000H working hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Heiche Model: HEIS02 Machine type: Powder coating line Year of manufacture: 1999 / 2013 (conversion) Status: Operational / Ready for use Technical Specifications - Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m - Maximum workpiece window: 1,150 x 880 x 350 mm - Maximum load per metre: 60 kg on 2 brackets - Compatible materials: Steel, aluminium, stainless steel, zinc die-cast - Coating thickness: 40 - 200 microns - Conveyor speed / throughput: 0.3 - 3.0 m/min - Noise level: less than 85 dB(A) - Control system: Siemens S7-1500 - Operating software: ICOM (upgraded 2024) - Operating modes: Manual and automatic - Conveyor system: Chain conveyor - Number of pre-treatment baths: 8 - Automatic powder coating booth: 1 - Manual powder coating booth: 1 - Drying: Adhesive water dryer + curing oven - Loading / unloading: Manual along the chain conveyor Utilities and C ...

working area: X .. 370 mm working area: Y .. 700 mm pressure: 28.0 t plate thickness: max. 12.7 mm ST throat: 310 mm height of stroke: 0 - 40 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm : 845 x 1420 mm work height max.: 900 mm oil volume: 50.0 l total power requirement: 5.0 kW weight of the machine ca.: 1800 kg range L-W-H: 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request The machine was used continuously in a test area and as a result has very few operating hours ! The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx ...

Key data: 65 mm

3 TURRETS - Y AXIS IN UPPER TURRET - 2 X C AXIS - LNS SERVO 3 SHORT BARFEED - VERY WELL TOOLED - FANUC 310 CONTROL - IMMEDIATELY AVAILABLE

This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details.

This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details.

Cream climate chamber Gram SKS 64 BÄKO-line Year of manufacture: 2025-02 Condition: fully functional Stainless steel body and interior with foldable self-closing door; 2-fold LED lighting; for sheet metal dimensions 60 x 40 cm (transverse insertion); innovative recirculation system with suction air flow prevents the goods from skinning or drying out; electronic control with simple operation and safety function for optimal product protection; Filter change indicator; automatic defrosting and condensation evaporation; Door seal replaceable; lockable; incl. height-adjustable support rails Dimensions (H x

turning diameter: - mm turning length: - mm control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m On behalf of the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete industrial Rademaker dough processing / sheeting line / rollout line with universal line and Packo nitrogen freezer, designed for the continuous production of flat dough sheets, followed by cutting into uniform square portions and direct transfer into a Packo freezing tunnel. Products like Puffy Pastry dough, croissant dough and Dansih patry dough sheets can be produced on this line. Line availabe for sale because of change of production., Working principle:, Feeding of thick laminated dough slabs, gradual reduction via multiple gauging / pressing stages. Formation of a continuous dough sheet, cutting (slitting) longitudinal dough strips then cutting them, with a cross cutter, into its final shape before entering into the Packo freezing tunnel for quickly freezing of the dough sheets. To prevent the dough sticking to the conveyor belt a continuous flow of flour is added in diffe ...

COTTON SPINNING SMALL OPEN END LINE – YOC – 2007 Composition: 1. Cotton Blow room – 1 set ( capacity 500-800 kgs/h cotton), composed of: - Blendomat – 36 m rails for 36 bales, 2 rollers bale plucker - Staend.Br – condenser - SP-EM – metal separator - CL-C3 - Cleanomat ( fine cleamer) - MX-1-10 – multimixer - SP-DX - Dustex 2. Flat cards model TC-03 - 3 sets ( 60-90 kgs/h /each)- with: - DFK chute feeds - 3 liker in ; 12 stat.flats front and 6 st.flats back - IDF – autolevellers - Automatic can changer – cans dia 1000x1200 mm 3. Drawing frames TD -03 - 2 sets ( prod. Speed 600-800 m/min) - Creel for 8 slivers/cans - Cans delivery – 450 x1000 mm 4. Rotor spinning machines AUTOCORO 360 of 168 rotors /each – 2 sets - Delivery – 6” cylindrical ( waxing) - Rotors – type BD ( cotton) ( S556-BD & G536-BD on second machine) - Combers – B 174  ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

General SKUR0900 MakeTechnoglass spa (Ita) LocationBarneveld TypeAE 6300 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7250 ltr (6300 ltr Nett) Vessel sizesDia 1800x 3100mm Dished bottomcheck Dished top sidecheck ManholeDia 500mm Top connectionsDN150 (4x), 250 (2x) OutletDN100 With jacket(710 ltr) Max. temperature-30/200 degr.C With paddle stirrerHastelloy C22 Motor15 kW, 400V (Ex) Speed mixing shaft20-80 rpm Glass Reactors MaterialGlass Information No.5744 Year of construction1996 Floorspace2.3x 2.3 M Total height5.8 M Weight8500 kg ATEX compatiblecheck Extra SpecificationsBottom part make Technoglass (1996) Cover part make Tycon (1985) : Generic medicinesOintmentsFine ch ...

General SKU304W588 MakePfaudler LocationBarneveld TypeE 1200 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1200 Ltr. Specified Features - Glass-lined Reactor MaterialGlass - Enamel (WWG-9115) Glass Reactors Reactorcheck Capacitybruto 1365 l, (netto 1200 l) Vessel sizesDia. 1300x1250 mm Dished bottomcheck Dished top sidecheck ManholeDN700 Top connectionsDN150, DN100 (4x) OutletDN100 With jacketcheck Volume 245 l Max. temperature-10°C/ +200°C Information No.62391 Year of construction1997 Floorspace1,50 x 1,50 m Total height1,80 m Weight2235 kg Extra Specificationscheckunused reactor bodyGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoGlass-lined ReactorsSolid pharmaceut ...

General SKU358W964 LocationBarneveld CEcheck MakeThalemail TypeRWA BE2500-1600HR-D100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2500 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Body Capacitybruto 3530 l., (netto 2500 l) Vessel sizesDia. 1710x2060 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN200 (2x), DN100 (5x) OutletDN100 Half coil jacketedcheck Tube volume 82/75 l Max. temperature-60°C/ +200°C With anchor stirrercheck only 2 parts Without motorcheck Glass Reactors MaterialGlass - Enamel (TPE-2000) Information No.626117/4 Year of construction2007 Floorspace2,0 x 2,0 m Total height2,50 m Weight6180 kg Extra Specificationswithout manhole cover Generic medicinesOintmentsFine chemicalsOther chemicalBiotechnolog ...

General SKU345S813 MakeR&M Italia (IT) No.8989 Year of construction2000 LocationBarneveld Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 Ltr (8220 Ltr) Vessel sizesDia:2000 x3050mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN250, DN150(2x), DN80 OutletDN150 With jacketcheck330 Ltr Max. temperature-30/200°C. With propellor stirrercheckAR5-100/2 Motor15,0 kW, 400 Volt EEx de/IIBT3) Speed mixing shaft21-104rpm Glass Reactors MaterialGlass - Enamel Information Floorspace2,6x2,6m Total height5,2 M Weight+/- 7500 KG ATEX compatiblecheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergen ...

General SKU204W036 MakePfaudler-Werke LocationBarneveld CEcheck TypeAE100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l., (netto 100 l.) Vessel sizesDia. 500x931 mm Dished bottomcheck Top connectionscheck OutletDN80 With jacketcheck Volume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5 kW, 400 volt, 1415 rpm, (Ex) Speed mixing shaft224rpm Glass Reactors MaterialGlass - Enamel (PPG) Information No.74686 Year of construction2007 Mounted on legscheck Floorspace0,80x0,80 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicals ...

General SKU204W048 LocationBarneveld CEcheck MakePfaudler-Werke TypeAE100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume138 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l, (100 l. Vessel sizesDia. 800x500 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck With jacketVolume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5kW, 400V, 1405rpm (EX) Glass Reactors MaterialGlass - Enamel (PPG) Information No.74687 Year of construction2007 Floorspace1,0x1,0 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergent & surf.Othe ...