loading used for sale

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to absorb the technology and the Enclosure of the approximately 7 m high powders Loading technology with flow vessel and powder delivery Technology through a Safeline metal detector in the truck filler neck. with rope glide staircase to reach Floor 1 and Floor 2 with complete steel construction for Wall and roof construction 1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to accommodate the technology and the Enclosure of the approximately 7 m high powder Loading technology with feed vessel and powder dispenser Technology through a safeline metal detector in the truck filler neck. with a stairway to reach it Floor 1 and Floor 2 with entire steel construction for Wall and roof construction

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

Loading lift table for covered outdoor areas – used- : Price from location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lift table in special design, ELS 1-10-TI-SO Year of construction: 2017 Height (h): 200mm Effective stroke (N): 1000mm Maintenance stroke: 1000mm Final height (H): 1200mm Total length: 1,800mm Total width: 1,000mm Stroke category: 4 Weight: approx. 450kg Load: Load capacity: 1.000kg Load distribution: surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Condition: very good Available: now Location: Stuttgart-Feuerbach A detailed description of the article is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is located on the ramp. A Euro pallet is transported with pallet trucks. ...

Lifting tipper Itec Frontmatec Type 27000 Machine Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible

ABB IRB 140 M2004 robot (year 2005) Available: (2) complete arms + (2) units of IRC5 module transformer This unique little robot is a compact and powerful 6-axis machine with a unique combination of fast acceleration, large working area and high payload. It is the perfect choice for tasks that require short cycle times and precision, such as part assembly and light part loading and unloading. General data Robot maximum load: 5 Kg Number of axes: 6 Max reach: 810mm Repeatability: 0.03mm Controller: IRC5 M2004 robot camera speed Axis 1: 200º / s Axis 2: 200º/s Axis 3: 260º/s Axis 4: 360º/s Axis 5: 360º/s Axis 6: 450º/s Robot movement range • Axis 1: ± 360 ° • Axis 2 ± 200 ° • Axis 3 ± 280 ° • Axis 4 ± 400 ° • Axis 5 ± 240 ° • Axis 6 ± 800 ° Applications: Loading and unloading of parts, handling, measurement.

Loading set complete 3 x aluminium silo each with a capacity of approx. 200 m³ 1 x aluminium silo each with a capacity of approx. 160 m³ Standing on steel frame with loading bellows, filter, vibrating floor, full detector, pipe diverters, silo pilot, control cabinet, etc. for sale Price on request +49 172 8345457

Mobile overpass with transport trolley 3390-1750 RA1079 The mobile loading bridge consists of a weather-resistant aluminium hollow compartment profile. It has a anti-slip profilesurface. A movable rear-end tongue compensates for different inclines and thus ensures a flat approach angle. On the underside of the crossing bridge there is a rubber profile, which prevents the loading bridge from slipping. Technical data: Manufacturer: unknown Type: Mobile overpass bridge with transport trolley 3390-1750 Year built: unknown Condition: good (used) Total length: 3390 mm Total width: 1750 mm Capacity: 2000 kg Weight: 130 kg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder  ...

Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...

Description: 2x Inkema RH-1 hydraulic loading platform systems Build in type Complete with motors and remote control Max. dynamic load capacity 6,000 kg Static load capacity 10,000 kg Dimensions: 2.90 x 2.20 x 0.40 metres. Both loading platforms have hardly been used. Approx. Onsite Dimension. (l x w x h): 2,400 x 3,000 x 1,500 mm, weight approx.: 2,000 kg

EMCO - Loading arm 4 inches - used - as spare part carrier

<b>Properties:</b> Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Color: Blue Incl. feet Incl. control cabinet Incl lighting Optically and technically very well worked up! <b>Telescopic belt conveyor</b> The telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and machinery. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. <b>Technical data:</b> Retr ...

Loading mobile for 200 litres standard car

Sold is a lifting-tilting device for loading trolleys made of stainless steel Year of construction 2018 load capacity up to 300 kg The plant is in very good condition and is dismantled

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 6 mm up to: 80 mm Length of bars min.: 130 mm Length of bars max.: 1500 mm Bar weight max.: 67 kg Loading time: 4 - 12 sec Feed range max.: 100 m/min Push force max.: 167 Nm Voltage 50 Hz 3x: 380 Volt Compressed air from: 5 bar Machine´s weight about: 600 kg Overall dimensions machine: Length: 2050 mm Width: 1800 mm Height: 1700 mm

Coil loading clamp with platform. Max aperture: 1800 mm; Mini 510 mm

Long automatic loading system. With this system, products clamped in clamping devices are automatically transferred to the machining center. The machine is in very good condition. Includes 25 pieces of clamps. Currently coupled with a 5-axis machining center from Hermlle. Still to be seen under power. (Subject to prior sale)

Bar Loading Magazine/Tal AUTO 65-32 LxWxH approx. 5000x1000x1500mm Weight approx. 600 kg Control via CNC machine (was mounted on a Traub-CNC machine) B0doi8oziq Rods diameter approx. 5-65mm Pole length approx. 4 meters Height adjustment approx. 1000-1300mm Power supply 380 volts Max. feed travel approx. 4000mm Max. rod weight approx. 150 kg

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Description: Lifting capacity 50 Kg Work capacity 15 Cycles/min Movement system suction cups Min. panel length 320 mm Max. panel length 3000 mm Min. panel width 250 mm Max. panel width 1000 mm Panel stack station no. stations 2 station loading Max. panel stack height 1600 mm Movement system with frame System suction cups with opening adjustment by NC Vacuum pump Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

A lifting-tilting device for loading trolleys made of stainless steel is sold Year of construction 2018 Max. load capacity up to 300 kg The plant is in very good condition and has been dismantled Price from stock 4000.-€ net

Power 324 KW, Displacement 12419 ccm, Diesel, permissible Ges. Weight 26000 kg, abs. Mileage 463.083 KM, AMNERKUNG: The loading crane of the vehicle requires a TÜV approval!

Description: Serial Number: 097 Working details: , Working Area: , X: 3070 , Y: 1550 mm , Axis displacement ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , X: 3420 , Y: 1550 , Z: 200 Cutting speed: X,Y: from 0 to 20 mt/min , Max. weight on the table: 840 kg , Assist gas control: Automatic , Max. working height: 840 mm , Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver) , Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer) , Laser  , Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation , Laser gas consumption Approx. 10 lit./min. Cooling water flow 160 lit./min. Power requirement AC 200/220V ± ...

Description: MESSERSI P4-F4 Self-Loading Concrete Mixer Truck no. 212V/003 5.196 hours ,according to counter Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,560 mm, weight approx.: 3,500 kg

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.

Baader 517 Filet Transfer Unit Condition: Good, working Designed for processing lines at fish factories (preferable to work with salmon and other salmon species) Working product range: 2-7 kg Capacity: up to 25 fish per minute

Bin lifter Type Lifting equipment Height 1900 Width 1500 mm Length 1800 mm Main material Stainlees Steel Time of realisation 2-3 weeks

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 2 mm up to: 28 mm Length of bars max.: 4000 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 400 kg Overall dimensions machine: Length: 4800 mm Width: 985 mm Height: 1500 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 42 mm Length of bars max.: 3200 mm Outstanding length min.: 530 mm Feed range: 0 - 400 mm/s Max. Feed force: 550 N Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Compressed air from: 6 bar Overall dimensions machine: Length: 4700 mm Width: 915 mm Height: 1200 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 1 mm up to: 12.7 mm Length of bars max.: 3200 mm Outstanding length min.: 70 mm Execution: Barrel Voltage 50 Hz 3x: 440 Volt Overall dimensions machine: Length: 5000 mm Width: 400 mm Height: 1200 mm Various accessories:

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 36 mm Length of bars max.: 3200 mm Overall dimensions machine: Length: 4000 mm Width: 500 mm Height: 1500 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 2 mm up to: 12.7 mm Length of bars max.: 4000 mm Overall dimensions machine: Length: 4500 mm Width: 1160 mm Height: 1200 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm Length of bars max.: 3000 mm Overall dimensions machine: Length: 500 mm

Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 6 mm up to: 32 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 400 kg

Technical data Bar diameter round up: 6 mm up to: 45 mm Length of bars max.: 2000 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2400 mm Width: 500 mm Height: 1500 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm

Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm

Workpiece weight: 0 kg Number controlled axis: 0   Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 1   MACH-id     5482 MAKE         FANUC + ROFIN TYPE          S- 420 iF & SM 2000

Workpiece weight: 0 kg Number controlled axis: 0   Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 2   MACH-id      5355 MAKE          ESAB TYPE            GANTRAC 14000 YOP               2013 DIMENSIONS Length        16.000 mm Width            2.000 mm Height            2.000 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   MACH-id     5059 MAKE          FMB TYPE            TURBO 5 - 42 YOP        DIMENSIONS Length        6000 mm Width         1000 mm Height        1600 mm

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.