load bank used for sale

Qty 2 , Dimensions and weight per unit. Serial number: 24371. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-33

Qty 3 , Dimensions and weight per unit. Serial numbers: X33992 and X33981. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-34

Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-37

JIGE International, clean interior, remote control. 452853km Auction-ID: A3-43367-7007

Information: - Inspection at 3,015 hours - Front wheels: new - Rear wheels: new and will be given with the purchase. - 4 in 1 shovel (new) - Payload: 593 kg - Bucket volume: 0.34 m³ - Max. motor power: 19 kW - Power type: Diesel - Tipping load: articulated 1,186 kg - Operating weight: 2,684 kg

Mobile central axle loading ramp, Bütt, BK912 – used - : Price ex location: 9.950.-€ (net), incl. loading! Manufacturer: Butt Type: BK912 Year of Make: 2017 Payload: 9,000kg Current exam until June 2026 a: Overall length: 11,800 mm Overall width: 2,300 mm Driving width: 1,960 mm Lip width: 2,140 mm Lip length: 400 mm b: 2,500 mm C(min.-max.): 1,100- 1,750 mm hot-dip galvanized safety gratings Side run-over protection Height-adjustable on the drive-over platform Condition: good Available: immediately Location: Nuremberg area

- Year of construction 2017 - Power: 55 kW (75 hp) - 1215 operating hours - Curb weight: 7460 kg - Hydraulic quick coupler - Original paintwork - Hammer tube - Telescopic arm - All-wheel drive - Joystick - Air conditioning - Radio - Extendable boom - Extendable dipper arm - Rotating beacon - Battery disconnect switch - Rotating beacon - Cable basket

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-740

blob:https://www.bobcat.com/a51f10ad-950c-4a50-be72-7a794f0a6fc2 Auction-ID: A3-43516-13166

Longwall board 3750mm long, camera system Complete with charger! Viewing by appointment Auction-ID: A1-40243-6

Key type plate no longer present - approximately 8 years old - working width approximately 2.2mm - loading volume approx. 2 cubic meters Auction-ID: A3-43516-18331

blob:https://www.bobcat.com/a51f10ad-950c-4a50-be72-7a794f0a6fc2 Auction-ID: A3-43516-13167

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-750

8T Mobile Loading Ramp Model DCQY-8 Dimension 11300mm(long)2100mm(wide)1100mm(high) Table Ramp length:7150mm(long)、flat surface 3000mm(long) Tail plate:750mm,lip plate:400mm Inside width:2000mm Table: 3mm steel plate + 8mm mesh Load capacities 8T Power Manual pump, leg travel:400mm Ramp adjusting range 1100-1800mm Guardrail height 140mm Main girder 160804 /601204 tube Side beam 100504mm tube Cylinder Φ80Φ45 Pipe 32Pma Tires :600-9 solid Color Blue/ red/black optional Weight 2.4t Total dimensions 11300x2100x1100 mm. Auction-ID: A7-44864-26

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-746

- Lot of 8 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-752

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-744

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-748

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more inf ...

Very solid and powerful CEA Digistar 250 Dual Pulsed welding station, suitable for professional use in workshop or industry. This machine is known for its reliability, stable welding performance and extensive setting options. Thanks to the dual pulse function, you can effortlessly weld high-quality connections with a tight and controlled welding pattern, ideal for e.g. steel and stainless steel applications - Welding process: MIG/MAG (pulse & dual pulse) - Power: up to 250A - Connection: 400V (3-phase) - Frequency: 50/60 Hz - Duty cycle: 250A @ 40%, 200A @ 60%, 160A @ 100% - Protection class: IP23 - Weight: approx. 50 kg - Features: Dual pulse function for perfect welding result, Digital operation and adjustable parameters, Suitable for continuous professional use, Compact and mobile, Includes torch, cables and accessories - Condition: Machine is in good working condition and can be use ...