36 offers

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 2019
Price: request quote
Location: Land-de DE
Seller: Kauz Maschinenhandel GmbH

VACUUM DRYER MOLDRUP-SSV PLANT FOR DRYING WITH SUPERHEATED STEAM UNDER VACUUM Vacuum autoclave Diameter 2.300 mm Length 18.000 mm Wood volume: app. 10 - 12 m3 per charge (50 mm thickness) Working pressure: 0 - 1 bar (abs) Working temperature: 39 - 100 C Material: 6 mm AISI 304 stainless steel plate Wood pack size: max 1,20 m x 1,35 m x 11,00 m Wood sticks: min. 19 mm Door: 1 mechanical rapid closure door Complete with internal rails for the trolleys Insulated with 80 mm super-wool and covered by a 0,6 mm galvanized plate cladding. Ventilation system: 18 fans powered by 2 kW electric motors place in the side of the autoclave Ventilator diameter: 800 mm Capacity: 250.000 m3/h ...

Category: 2417: trucks/stake body
New in: 1992
Price: 3.900 €
Location: Land-de DE
Seller: Gassmann GmbH

; Mileage [km]: 435000; Power [PS]: 175; Gross weight [kg]: 11000; Transmission: Mechanisch; Front tyre size: 245/70 R 19,5; Rear tyre size: 245/70 R 19,5; Accessories: Differentialsperre; Colour: Orange; Wheelbase: 3900; Suspension type: Blatt/Blatt; Max payload [kg]: 4650

Category: 2100: electrical parts
New in: new
Price: 80 €
Location: Land-at AT 3130 Herzogenburg
Seller: IPV GmbH

NH switch disconnector 400A, new, Rittal, Gr.3 Manufacturer: Rittal Attention! We have the best prices on the market, several positions of Rittal, NH fuses and many other electrical materials with very reasonable prices. For a larger purchase quantity you will receive an additional great discount. New! The part was bought from a spare parts warehouse of a company in the course of a bankruptcy and is completely new.

Category: 1101: power generators
New in: 2002
Price: 17.500 €
Location: Land-nl NL Oudenbosch
Seller: DPX Power BV

; Gross weight [kg]: 1300; Accessories: 50Hz / 60Hz, 380V / 440V

Category: 2100: electrical parts
New in: new
Price: 90 €
Location: Land-at AT 3130 Herzogenburg
Seller: IPV GmbH

NH switch disconnector 630A, new, Rittal, Gr.3 Manufacturer: Rittal Type: SV9343.310 Attention! We have the best prices on the market, several positions of Rittal, NH fuses and many other electrical materials with very reasonable prices. For a larger purchase quantity you will receive an additional great discount. New! The part was bought from a spare parts warehouse of a company in the course of a bankruptcy and is completely new.

Category: 107: sheet metal working
New in: new
Price: 340.580 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.100 x 1.550 mm : 1.070 - 1.080 nm : 5,0 kHz : 33 kWh : 16 mm : 8 mm : 8 mm : 3.100 mm : 1.550 mm : 125 mm : 3.000 x 1.500 mm : 1.000 kg : 9.000 x 7.500 mm : 6.300 mm : 4.860 mm : 2.300 mm : 9.000 kg fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The table can be manually pulled out on the side of the machine to load and unload it. The laser power source (resonator) of the HDFL series is an all-solid-state fiber laser without the need of any laser gas. The f ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL 7333PJ Apeldoorn
Seller: Regoed BV

Overhead conveyor system for the purpose of powdering/heating existing of: loading /unloading station; switch zone; buffer zone; conveyor length approx: 110 mtr. 2 drive motors; bearing construction with 13 upright. Bankruptcy auction "Color Coating B.V." Apeldoorn with, among others, IDEAL-Line powder coating installations and gas dry curing oven. As a result of the bankruptcy of "Color Coating B.V." in Apeldoorn, ProVeiling.nl will auction the inventory and inventory of this company. End of auction from: 15 October 2018 20:00 Take a look at abc.ProVeiling.nl for more lots; photos and / or bids

Category: 107: sheet metal working
New in: new
Price: 276.450 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.060 x 1.530 mm : 1.070 - 1.080 nm : 5,0 kHz : 25 kWh : 12 mm : 6 mm : 6 mm : 3.060 mm : 1.530 mm : 160 mm : 3.000 x 1.500 mm : 1.000 kg : 11.000 x 6.000 mm : 9.440 mm : 2.750 mm : 2.420 mm : 12.000 kg fiber laser HESSE HD-F made by DURMA The laser power source (resonator) of the HDF series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at the  ...

Category: 405: pillow packs machines
New in: 2010
Price: request quote
Location: Deutschland
Seller: Peter Heidenreich Maschinenhandel

Many thanks for your interest on our second hand machines, please find follow our offer: Nearly new tetrahedral packing plant / tubular bag plant (VFFS plant) The plant was acquired in 2010 and was not long and often in operation. After starting up the plant, the customer company Schlecker was bankruptcy and the producer went now sell the line, has now no further use for the machine. Effective maturity maybe 1 year, approx. working hours 1000. The machines are designed for the supply of individual products via an 8 lane counting machine, two-lane VFFS packaging system for tetrahedral packaging or as "normal" to use VFFS packaging machine. System components: - Multi-lane separating ...

Category: 107: sheet metal working
New in: new
Price: 399.090 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.060 x 1.530 mm : 1.070 - 1.080 nm : 5,0 kHz : 53 kWh : 20 mm : 10 mm : 12 mm : 3.060 mm : 1.530 mm : 160 mm : 3.000 x 1.500 mm : 1.000 kg : 11.000 x 6.000 mm : 9.440 mm : 2.750 mm : 2.420 mm : 12.000 kg Faserlaser HESSE HD-FL made by DURMA The laser power source (resonator) of the HDFL series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at t ...

Category: 102: lathes
New in: 2014
Price: request quote
Location: Land-pl PL
Seller: CNC Management Ltd

Make: Sedin Model: TKV 525 Year: 2014 Condition: Used Machine type: Mill Location of machine: Poland Control: CNC Siemens Sinumeric Service details: Full History Documentation / manuals included? Yes Is tooling / spares included? Yes Is the equipment viewable under power? Yes Machine Details CNC Double Column Vertical Lathe GORBREX model TKV525 ( built on the corp of SEDIN Lathe ) Manufacturer: GORBREX – Poland Model: TKV525 New in: January 01/2014 Condition : very good, under power Control: SIEMENS Sienumeric 840D Delivery time: immediately This VTL was built by our company in 2014 for our customers. At that moment he lost his job for this ...

Category: 107: sheet metal working
New in: new
Price: 324.360 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.060 x 1.530 mm : 1.070 - 1.080 nm : 5,0 kHz : 45 kWh : 12 mm : 6 mm : 6 mm : 3.060 mm : 1.530 mm : 160 mm : 3.000 x 1.500 mm : 1.000 kg : 11.000 x 6.000 mm : 9.440 mm : 2.750 mm : 2.420 mm : 12.000 kg fiber laser HESSE HD-FL made by DURMA The laser power source (resonator) of the HDFL series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at th ...

Category: 1401: shelves
New in: 2006
Price: 673 €
Location: 21698 Harsefeld
Seller: eth Ericus Transport u. Handelsges.mbH

We offer for sale: -File storage - archive shelving shelving rack Total amount: 2,000 floors, 320 frame Dismantling: Bank central warehouse Mainz Kastel Technical details: PLUG-in SYSTEM FA. Zippel Year of construction: 2006 Condition (as new) 1 double shelf series 2 x 10 m Shelving rack file shelf archive shelf for ca. 1.440 DIN A4 folder Dimensions: 22 stand, approximately 1,950 x 300 mm 120 shelves, approximately 1,000 x 300 mm (6 floors in the box) 264 floor hooks 4 crosses shelf loads: floor load a single series 60 kg (evenly distributed load) one double row 120 kg (evenly distributed load) Field loads: single-sided shelves up to 36 ...

Category: 107: sheet metal working
New in: new
Price: 534.000 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 1.070 - 1.080 nm : 5,0 kHz : 25 kWh : 8 mm : 4 mm : 6 mm : 170 mm : 120 x 120 mm : 150 x 100 mm : 8.500 mm : 3.000 mm : 185 mm fiber laser HESSE HD-TC made by DURMA The laser power source (resonator) of the HD-TC series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at the same power. It makes the machine very economical, fast and easy to handle ...

Category: 209: other wood working machines
New in: new
Price: 4.250 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 120 EURO 4250 TECHNICAL DATA MARTINA 120 Flue capacity Kcal 125000 Flue capacity KW 145 Wood fuel consumption kg/h 30 air flow (at 15°C) m3/h 9000 Fan electric power 230 Volt M - Kw 1,4 flue length mm 950 loading door width x height mm 460x440 approximate surface to heat up m3 3000 approximate surface to heat up m2 500 overal dimension: width mm 900 length mm 1250 height mm 2300 net weight kg 650 chimney diameter 200 hot air delivery pipes quantity / mm 3 X D 250 optional all the technical data are subjected to changes and improvements and improvements and we reserve the right to change them without notice Our hot air oven are designed ...

Category: 107: sheet metal working
New in: new
Price: 427.600 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 1.070 - 1.080 nm : 5,0 kHz : 25 kWh : 8 mm : 4 mm : 6 mm : 170 mm : 120 x 120 mm : 150 x 100 mm : 6.500 mm : 3.000 mm : 185 mm fiber laser HESSE HD-TC made by DURMA The laser power source (resonator) of the HD-TC series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at the same power. It makes the machine very economical, fast and easy to handle ...

Category: 209: other wood working machines
New in: new
Price: 1.950 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 15/30 TECHNICAL DATA MARTINA 15 Flue capacity Kcal 12720 Flue capacity KW 14,8 Wood fuel consumption kg/h 4,5 air flow (at 15°C) m3/h 1500 Fan electric power 230 Volt M - Kw 0,4 flue length mm 450 loading door width x height mm 290x280 approximate surface to heat up m3 300 approximate surface to heat up m2 60 overal dimension: width mm 600 length mm 900 height mm 1700 net weight kg 250 chimney diameter 140 all the technical data are subjected to changes and improvements and improvements and we reserve the right to change them without notice Our hot air oven are designed to heat your premises in burning your chips, sawdust and wood off-cut ...

Category: 107: sheet metal working
New in: new
Price: 265.850 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.100 x 1.550 mm : 1.070 - 1.080 nm : 5,0 kHz : 25 kWh : 12 mm : 6 mm : 6 mm : 3.100 mm : 1.550 mm : 125 mm : 3.000 x 1.500 mm : 1.000 kg : 9.000 x 7.500 mm : 6.300 mm : 4.860 mm : 2.300 mm : 9.000 kg fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The table can be manually pulled out on the side of the machine to load and unload it. The laser power source (resonator) of the HDFL series is an all-solid-state fiber laser without the need of any laser gas. The f ...

Category: 209: other wood working machines
New in: new
Price: 6.400 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 240 EURO 6250 TECHNICAL DATA MARTINA 240 Flue capacity Kcal 199000 Flue capacity KW 233 Wood fuel consumption kg/h 50 air flow (at 15°C) m3/h 18000 Fan electric power 230 Volt M - Kw 3 flue length mm 1200 loading door width x height mm 460x600 approximate surface to heat up m3 4500 approximate surface to heat up m2 900 overal dimension: width mm 1300 length mm 1700 height mm 2300 net weight kg 880 chimney diameter 250 all the technical data are subjected to changes and improvements and improvements and we reserve the right to change them without notice Our hot air oven are designed to heat your premises in burning your chips, sawdust an ...

Category: 107: sheet metal working
New in: new
Price: 294.590 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.100 x 1.550 mm : 1.070 - 1.080 nm : 5,0 kHz : 28 kWh : 16 mm : 8 mm : 8 mm : 3.100 mm : 1.550 mm : 125 mm : 3.000 x 1.500 mm : 1.000 kg : 9.000 x 7.500 mm : 6.300 mm : 4.860 mm : 2.300 mm : 9.000 kg fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The table can be manually pulled out on the side of the machine to load and unload it. The laser power source (resonator) of the HDFL series is an all-solid-state fiber laser without the need of any laser gas. The f ...

Category: 209: other wood working machines
New in: new
Price: 1.950 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 30 TECHNICAL DATA MARTINA 30 Flue capacity Kcal 25700 Flue capacity KW 29,8 Wood fuel consumption kg/h 9 air flow (at 15°C) m3/h 2400 Fan electric power 230 Volt M - Kw 0,55 flue length mm 580 loading door width x height mm 330x330 approximate surface to heat up m3 600 approximate surface to heat up m2 120 overal dimension: width mm 600 length mm 900 height mm 1700 net weight kg 300 chimney diameter 180 efficiency % 85-90 dust in the smoke g/m3 CO in the smoke g/m3 depression in the chimney in PA 11 CO2 % in the smoke 6,1 smoke temperature °C 286 hot air delivery pipes quantity / mm SEITLICH optional 2 x D 180 all the technical da ...

Category: 2417: trucks/stake body
New in: 1991
Price: 1.900 €
Location: Land-de DE
Seller: Gassmann GmbH

; Power [PS]: 155; Gross weight [kg]: 10000; Transmission: Mechanisch; Front tyre size: 235/75R17.5; Rear tyre size: 235/75R17.5; Accessories: ABS; Colour: Blau; Suspension type: Blatt/Blatt; Cargo space dimensions [LxBxH]: 6100x2430x2450; Max payload [kg]: 5450; Cabin: Schlafkabine

Category: 209: other wood working machines
New in: new
Price: 8.900 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 350 EURO 9000 TECHNICAL DATA MARTINA 350 Flue capacity Kcal 335000 Flue capacity KW 390 Wood fuel consumption kg/h 85 air flow (at 15°C) m3/h 20000 Fan electric power 230 Volt M - Kw 5 flue length mm 1400 loading door width x height mm 500x700 approximate surface to heat up m3 7500 approximate surface to heat up m2 1600 overal dimension: width mm 1700 length mm 2000 height mm 2900 net weight kg 1600 chimney diameter 300 hot air delivery pipes quantity / mm 4 X D 350 optional all the technical data are subjected to changes and improvements and improvements and we reserve the right to change them without notice Our hot air oven are desi ...

Category: 1009: excavators
New in: 2005
Price: 43.000 EU?
Location: Land-pl PL
Seller: Kennedy Machines

Tracked backhoe loader with two-way articulated boom. Designed for long-range earthworks. Storage of land for storage, deep digging, building of embankments and embankments. Universal model with wide application.

Category: 209: other wood working machines
New in: new
Price: 14.000 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 500 EURO 13000 TECHNICAL DATA MARTINA 500 Flue capacity Kcal 429400 Flue capacity KW 500 Wood fuel consumption kg/h 100 air flow (at 15°C) m3/h 37000 Fan electric power 230 Volt M - Kw 7 flue length mm 1600 loading door width x height mm 700x700 approximate surface to heat up m3 11000 approximate surface to heat up m2 2300 overal dimension: width mm 1900 length mm 2200 height mm 2900 net weight kg 2200 chimney diameter 300 hot air delivery pipes quantity / mm 4 x D 450 optional all the technical data are subjected to changes and improvements and improvements and we reserve the right to change them without notice Our hot air oven are de ...

Category: 101: boring mills and machining centers
New in: 1965
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

spindle diameter: 0 mm x-travel: 1400 mm y-travel: 1000 mm z-travel: 900 mm total power requirement: 15 kW Table size, approx. 1,570 x 1,024 mm Max. weight on table, approx. 2,500 kg Table travel, longitudinal 1,400 mm Spindle travel, cross 1.000 mm Vertical travel of spindle quill 300 mm Vertical travel of cross beam 900 mm Distance between table and boring spindle, max. 1.265 mm Distance between the two columns 1,600 mm Max. load on table, approx. 2.500 kg Spindle taper, internal / external MK 4 / Sip 4 e 18 spindle speeds 40 - 2,000 rpm Milling feeds for table, infinitely variable 25 - 500 mm/min 4 milling feeds for boring head 30 - 180 mm/min 6 boring feeds 0.04 - 0.35 mm/r ...

Category: 209: other wood working machines
New in: new
Price: 2.350 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 55 TECHNICAL DATA MARTINA 55 Flue capacity Kcal 43000 Flue capacity KW 49,9 Wood fuel consumption kg/h 15 air flow (at 15°C) m3/h 4900 Fan electric power 230 Volt M - Kw 1,05 flue length mm 650 loading door width x height mm 370x350 approximate surface to heat up m3 1000 approximate surface to heat up m2 220 overal dimension: width mm 720 length mm 1000 height mm 2200 net weight kg 400 chimney diameter 180 efficiency % 85-90 dust in the smoke g/m3 0,09 CO in the smoke g/m3 0,7 depression in the chimney in PA 13 CO2 % in the smoke 6,3 smoke temperature °C 290 hot air delivery pipes quantity / mm SEITLICH optional 2 x D 200 all the  ...

Category: 102: lathes
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 198 ...

Category: 209: other wood working machines
New in: new
Price: 3.000 €
Location: Europa - Italien
Seller: MISCHI KURT

HOT AIR OVEN MARTINA 85 TECHNICAL DATA MARTINA 85 Flue capacity Kcal 73000 Flue capacity KW 85 Wood fuel consumption kg/h 19 air flow (at 15°C) m3/h 6400 Fan electric power 230 Volt M - Kw 1,05 flue length mm 840 loading door width x height mm 430x430 approximate surface to heat up m3 1600 approximate surface to heat up m2 300 overal dimension: width mm 800 length mm 1170 height mm 2200 net weight kg 450 chimney diameter 200 efficiency % 85-90 dust in the smoke g/m3 0,09 CO in the smoke g/m3 0,7 depression in the chimney in PA 16 CO2 % in the smoke 6,5 smoke temperature °C 291 hot air delivery pipes quantity / mm 2 X D 250 optional all the technical d ...

Category: 102: lathes
New in: used
Price: request quote
Location: Land-NL Netherlands, 09155 Babberich
Seller: Mach4metal

Turning diameter: 1050 mm Turning length: 4000 mm Turret positions: 0 CNC Brand: Heidenhain CNC Model: Manuel Plus Make TOS Variant  Type SUA 100 CNC Variant Year 11 / 2001 tos variant HeidenHain MANUEL PLUS draaibank Centre height (mm)Swing bed =  1.050 Center distance (mm)Swing sup = 730 Spindle bore DBC = 4.000 Bore = 1154 Chuck 800 mm 3 x Steady rest Mot. tailstock Feed top slide Work load 8 T

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE Maxhütte
Seller: Albin Halbritter GmbH

50 transport containers in stainless steel, á 800 l, stackable, in transport frames Capacity: 800 l each Make: Fa. Waldner Wangen Operating pressure: 1,0 bar Weight: around ca. 127 kg Year of construction: several  Operating temperature: 85° celsius Size frame: L max. = 1,09 m / W max. = 1,09 m / H = ca. 1,78 m Size tank: diam. inside = 0,995 m / H vessel = 0,90 m / H with lid = ca. 1,50 m Supplies: 1 rest outlet NW 50 KM with disk valve thread/thread each 1 supply in dome lid NW 40 G with screwed-on overpressure valve each 1 clip supply in dome lid (like NCC) each Dome lid: 1 dome lid, diam. inside = 0,40 m, closeable via 6 fastening screws Bottom: flat conical  ...

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 01587-02943
Seller: Brand GmbH

We offer for sale, tech. Equipment and machinery from a gravel pit. The items available, please refer to the following list. For more information and pictures, they contact us in connection. Article collection with Pos.Nr.: -(1x Nr.01.03) dry before screening in the stat. Conveyor with screening machine IBAG 1800 / 5000 / 2 B,. + 1 printing machine 1800 / 4000 IBAG,. and several volumes of discharge. Upstream from the stationary wet screening plant. Weight approx. 47 t. directly mounted on the control console, ready, set _ -(1x Nr.01.04) stationary wet processing plant up to 280 / hour with approx. 90 m of bias binding on height of 24 m, 1 wet - sieve machine IBAG, type LESD ...

Category: 203: planing machines
New in: new
Price: request quote
Location: Land-de DE Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Total plate size: 2120 x 760 mm plates size without pliers: 1900 x 600 mm thickness: 40 mm bore for bench dogs: diam. 19 mm clamping JAWS left (front caliper): 500 x 55 mm JAWS right (rear caliper): 470 x 120 mm clamping width front / rear caliper: 210 / 180 mm Bank hook bar: 38 x 120 mm working height: 860 mm weight approx.: 73 kg comes with: drawer loading with 2 x round bench dogs short 2 x round bench dogs long cupboard with drawers EB 2 (art. No.: 14-2278)

Category: 1300: other machines and plants
New in: used
Price: 41.500 €
Location: Land-pl PL
Seller: Industrio Service

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from t ...

Category: 1101: power generators
New in: 2000
Price: 99.000 USD
Location: Land-us US Burbank
Seller: IMP Corporation

Item Number: 10338 Year: 2000 Manufacturer: Detroit / MTU Fuel Type: Diesel Model: 16V2000DC Serial Number: 416715-010 KW: 920 Hz: 60 Voltage: 480 RPM: 1800 Hours: 4750 Since New Price:$99,000.00 More Information: MTU 16V2000-DC Power Module. Rated at: 920kw standby / 860 kw prime, 60 hz, 1800 RPM, 480 volts. Year 2000. Less than 4750 hours since new. Sound attenuated. Fully load banked, clean oil report. Special air ride chassis, anti lock brakes, disc wheels, new tires. Magnamax reconditioned generator end. 1870 gallon fuel tank. (Stewart and Stevenson Packaged) for Aggreko Generator Rentals. Unit can be converted to 50hz for an additional cost of $2500. Please call for more d ...

Category: 1101: power generators
New in: 2000
Price: 99.000 USD
Location: Land-us US IMP Corporation
Seller: IMP Corporation

Item Number: 10338 Year: 2000 Manufacturer: Detroit / MTU Fuel Type: Diesel Model: 16V2000DC Serial Number: 416715-010 KW: 920 Hz: 60 Voltage: 480 RPM: 1800 Hours: 4750 Since New Price: More Information: MTU 16V2000-DC Power Module. Rated at: 920kw standby / 860 kw prime, 60 hz, 1800 RPM, 480 volts. Year 2000. Less than 4750 hours since new. Sound attenuated. Fully load banked, clean oil report. Special air ride chassis, anti lock brakes, disc wheels, new tires. Magnamax reconditioned generator end. 1870 gallon fuel tank. (Stewart and Stevenson Packaged) for Aggreko Generator Rentals. Unit can be converted to 50hz for an additional cost of $2500. Please call for more details.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)