lk used for sale

Conveyor belt Brand: LKOREMAN A.A length = 7000 mm Belt width: 2000 mm Drive deflection roller Ø 520 mm. Power requirement: Stiebel slip-on gearbox 18.5 kW Speed about 1.3 m/sec.

LKoreman Permanent Magnet Strap (unused) Block : L= 1200 x W=850 x H=300 mm Length frame A.A.= 1900 mm Belt width : 800 mm Drive slip-on gearbox 1.5 kW Speed 1.6 m/sec

Batch of conveyor belts consisting of: Nr1= Brand: LKOREMAN, YOC 2010 A.A length: 1000 mm, belt width: 1000 mm Power requirement: 0.2 kW drum motor, speed: 0.4 m/s. Nr2= Brand: LKOREMAN, YOC 2001 Curve conveyor belt 20°, belt width: 700 mm Power requirement: 0.37 kW gearbox, speed: 0.2 m/s. Nr3= Brand: Schenk, (=sold) Nr4= Brand: LKOREMAN, YOC 2006 A.A length: 850 mm, belt width: 500 mm Power requirement: 0.3 kW drum motor, speed: 0.5 m/s. Stock: 2 pieces

Permanent Magnet Block (unused) Brand: LKoreman Block : length 1200mm, width 850mm, height 320mm. Heavy Duty In stock : 2 piece(s)

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

Transmitter, freely programmable SFM GERABERG LKM 153-I Thermocouple: Pt100 / Pt1000 Output: 4 - 20 mA digital process output: RS232, USB Operating voltage: 24 V DC Cable length: approx. 2.9 m New ! Dimensions ( packaging ): 170 x 170 x 80 mm

Electronic Level Sensor IFM EFECTOR LK8123 Rod length: 472 mm Rod diameter: Ø 16 mm U: 18 - 30 V DC I (out): 200 mA approx. 3,3,2 m connection cable used ! Dimensions: 530 x 65 x 55 mm

Transmitter, freely programmable LKM ELEKTRONIC GmbH LKM 153-I Measuring range: 0 - 1100 °C Sensor: Ø 3 mm, length: 500 mm Thermocouple: NiCr-Ni(K) output: 4 - 20 mA digital process output: RS232, USB Operating voltage: 24 V DC Cable length: approx. 2,9 m used ! Dimensions ( packaging ): 550 x 100 x 100 mm

Electronic Level Sensor IFM EFECTOR LK8123 Rod length: 728 mm Rod diameter: Ø 16 mm U: 18 - 30 V DC I (out): 200 mA used, tested ! Dimensions:790 x 65 x 50 mm

Electronic level sensor, with thermowell IFM EFECTOR LK8123 rod length: 48 5 mm rod diameter: Ø 16 mm U: 18 - 30 V DC I (out): 200 mA thermowell: Outer diameter: Ø 23 mm, length: 495 mm used, tested ! Dimensions:790 x 65 x 50 mm

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Type: LKM 3027 Just: 2213857 ZwischengetriebeNr.: 318978 Disco built gearbox Lenze Type: 11711.06.16 No.: 6/7000/2365 N1 = 1500 min-1 N2 = 65-375 min-1 Engine: Loher power: 2,5 kW on mobile carts Condition good Dimensions: LWH = 1300 x 350 x 750 mm Weight: approx. 100 kg

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.

equipped with: wheels; 5m cable welding torch; 4m ground cable PLEASE NOTE: C02 bottle not included

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Power: 75kW, was used for milk products.

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

Sanitary centrifugal pump, Alfa Laval, 222,000 liters per hour, 45 kW, 78 A, approx. 145 kg.

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Propeller mixer Manafacturer: ABB Propeller blade diameter: 250 mm in EEx Protection LWH: 300 x 300 x 800 mm

Centrifugal pump multi-stage Manafacture: Alfa Laval Type LKH 114 FSS Serial number 061423 Power: 11.0 kW Speed 2,900 rpm Inlet DN 50 Outlet DN 40 VA Cover Sealing water 3-stage mobile Cable

Centrifugal pump Manafacture: Alfa Laval Type LKH 45/178 FSS Serial number 197878 Power: 11.0 kW Speed 2,940 rpm Inlet DN 100 Outlet DN 80 Year of construction: 2016 VA Cover Sealing water

Centrifugal pump Manafacture: Alfa Laval Type LKH 10/163 SSS Serial number 053619 Power: 3.0 kW Speed 2,850 rpm Inlet DN 65 Outlet DN 50 VA Cover Sealing water

Centrifugal pump Manafacture: Alfa Laval Type LKH-35/205 SSS Serial number 014253 Power: 7.5 kW Speed 2,855 rpm Inlet DN 50 Outlet DN 50 VA Coverage

Centrifugal pump Manufacturer : Alfa Laval Type: LKH 20/150 SSS Serial Number: 3685 Impeller diameter 150 mm Power: 4.0 kW Inlet DN 65 Outlet DN 50 Equipment: VA cover mobile

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Rotary lobe pump Manufacturer : Alfa Laval Type: LKM 1015 Power: 3.0 kW Speed 960 rpm Inlet 40 mm Outlet 40 mm Pumps No. 950644/01 Come No. 2213354 Barrier liquid with container Variable speed gearbox 115-660 rpm explosion-proof mobile

Laboratory refrigerator LKPv 1420 MediLine Dimensions: 216 / 143 / 83 cm

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Rotary lobe pump Manufacturer : Alfa Laval Type: LKPL 4055 Power: 2.5 kW Flow rate 2700-15600 l/h Speed 1,420 rpm Inlet 65 mm Outlet 65 mm Pumps No. 312628 Come No. 2213706 Barrier liquid with container Variable speed gearbox 83-477 rpm explosion-proof mobile

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch, Level Switch -Manufacturer: ifm, electronic level sensor -Type: LK7023 -Immersion depth: 472 mm -Dimensions: Ø50 x 535 mm -Weight: 0.4 kg

Backhoe buckets, excavator buckets, demolition buckets, ditch buckets, excavator buckets, ditch cleaning buckets -Manufacturer: KSW, backhoe type TL LK5-600 -Intake: KSW03L -Width: 600mm -Content: 158 liters -Recording on the spoon: can be changed by us for an additional charge -Dimension: 935/600/H690 mm -Own weight: 152 kg

Crank press SMERAL LKT 250A

Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark

General SKU315T1109 LocationBarneveld MakeWeisshaar TypeLKTA 120 Mach.No.205149 Main Features Heating (medium)Electric Capacity21 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machineair cooling and drying unit Information Year of construction2005 CEcheck Floorspace2,3x1,1 m Total height2,1 m Extra SpecificationsRefrigeration fluid R407C cooling capacity 21 kW operating pressure 24 bar nominal air flow: 1200 Nm³/h (20 Nm³/min) airflow excess heat 6500 m³/h air connections DN 125 condensate drain 3/4 Temperature control unitsWeisshaarHeat exchangers > Temperature control unitsBrand > Weisshaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU315T1297 LocationBarneveld MakeWeisshaar TypeLKTA 90 Mach.No.205149 Pressure Working pressure1 Bar Main Features Heating (medium)Electric Capacity8 KW Specified Features - Miscellaneous dryer MaterialStainless steel Miscellaneous dryers Temperating machineair cooling and drying unit Electric heatingcheck With coolingcheck R407c, volume 10,7 kg Temperature-15/48 °C. Motor8 kW 400 Volt Information Year of construction2005 Total height2 m CEcheck Floorspace1,2x1,1 m Weight410 kg Extra SpecificationsRefrigeration fluid R407C cooling capacity 21 kW operating pressure 24 bar nominal air flow: 900 Nm³/h (15 Nm³/min) airflow excess heat 5500 m³/h air connections DN 125 condensate drain 3/4 Miscellaneous dryersWeisshaarDryers > Miscellaneous dryersBrand > Weisshaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU224T280 LocationBarneveld MakeAlfa Laval TypeLKP-L TYPE L Mach.No.312753 Main Features MaterialStainless steel Motor0.75 KW Specified Features - Rotary Lobe Pump MaterialStainless steel Rotary Lobe Pumps Pumpcheck Number of pumps:1 With motor0,75 kW 230/400 Volt With variable speed drivecheck Inletdia. 26 mm Outletdia. 27 mm Information Year of construction2013 Total height0,6 m Floorspace0,8x0,25 m Weight50 kgRotary Lobe PumpsAlfa LavalPumps > Rotary Lobe PumpsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU289P535 LocationBarneveld MakeAlfa Laval LKM TypeLKH 30/220 SSS Mach.No.30-06657 Main Features MaterialStainless steel Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps PumpCentrifugal pump Number of pumps:1 Capacitycheck unknown With motor11 kW InletDN65 OutletDN50 Information Year of construction1995 Floorspace0,9x0,6 M Total height0,6 M Weight100 KG Extra SpecificationsCECentrifugal PumpsAlfa LavalPumps > Centrifugal PumpsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU244U280 LocationBarneveld Makeunknown: missing type plate Main Features Motor1.5 KW Length2340 mm Inlet diameter100 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter90 mm Length2340 mm Between inlet and outlet2000 mm Shaft diameter60 mm Pitch97 mm Inletdia. 100 mm Outletdia. 125 mm Insulatedcheck Motor1,5 kW 220-240/380-415 Volt Screw speed20-100 rpm Height between in- and outlet500 mm With coverscheck Information Floorspace3,5x0,4 m Total height0,45 m Weight300 kg Extra Specificationsthis conveyor screw served as an inlet for cryogenic grinding Horizontal screw conveyorsLinde AGConveying systems > Horizontal screw conveyorsBrand > Linde AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...

Well drilling rig, drilling mount, UNIMOG drilling rig, UNIMOG drilling rig -Well drilling rig: on Mercedes Benz UNIMOG 4x4 with truck tandem trailer -Unimog: Mercedes Type 435 built in 1976, mileage: 97,243 km -Trailer: Schmid type MTT500 built in 1991 -Drilling rig: drilling power turret U 58 (company AGBO) torque 1700 Nm, speed 140 min -Linkage tensioning device: up to 165mm -22 boring bars: Ø 76mm length 4 m total length 88 meters -Theoretical drilling depth: 150 meters (depends on the soil and diameter of the drill hole) -1 flushing pump: Hatz 30C 30L, with Reno standard block pump type 65-250/263, 100m³/h, 8.9 bar -Price/tax: complete -Dimensions: Truck 6250/2300/H3350 mm / Trailer 6300/2400/H3050 mm -Total dimensions: 11300/2400/H3350 mm -Weight: kg

Description: serial number: 1341 machine consisting of: wood milling machine horizontal drill sliding table cast iron frame and original paint milling cutter  , please also have a look at the videos of this machine Approx. Onsite Dimension. (l x w x h): 1,600 x 1,300 x 1,200 mm, weight approx.: 2,500 kg

max. wheel diameter: 540 mm turning speeds: 315 - 1260 U/min axis adjustment +/-: 50 mm ratio: 1 : 1 bis 1 : 10 taper MK: weight of the machine ca.: 2,3 t dimensions of the machine ca.: 1,7 x 2,1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.