line cast pp used for sale

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-320-C-PPVA -Stroke travel: 320 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Hole: Ø 12 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 580/55/H130 mm -Weight: 2.6 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-63-80-A-PPS-A -Stroke travel: 80 mm -Piston: Ø 63 mm -Piston rod: Ø 16 mm / M12 -Hole: Ø 12 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 185/75/H100 mm -Weight: 2.1 kg/pc.

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-40-200-B-PPV-A-KF 532319 -Piston: Ø 40 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 365/155/H55 mm -Weight: 5.4 kg/pc.

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-125-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available Price: per piece -Dimensions: 260/85/H55 mm -Weight: 2.0 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-125-PPVA-N3 1376661 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 2 cylinders available Price: per piece -Dimensions: 290/53/H92 mm / 290/55/H55 mm -Weight: 1.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-80-15-A-PPS-A 572728 -Stroke travel: 15 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 110/95/H125 mm -Weight: 1.4 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm -Weight: 3.5 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 7 cylinders available - Price: per piece -Dimensions: 290/35/H32 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-20-15-A-PPS-A 577167 -Stroke travel: 15 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm / M8 -Max. pressure: 10 bar -Number: 5 cylinders available -Price: per piece -Dimensions: 75/35/H35 mm -Weight: 0.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 290/27/H55 mm -Weight: 0.3 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-85-PPV-A 14322 -Stroke travel: 85 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 225/27/H50 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-125-PPV-A 19249 -Stroke travel: 125 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 4 cylinders available -Price: per piece -Dimensions: Ø27 x 265 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-S-25-15-PPS-A 8112006 -Stroke travel: 15 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 130/27/H45 mm -Weight: 0.2 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-16-30-PPV-A 1908269 -Stroke travel: 30 mm -Piston: Ø 16 mm -Piston rod: Ø 6 mm / M6 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 140/20/H40 mm -Weight: 0.1 kg

Pneumatic cylinders -Stroke travel: 350 mm -Piston diameter: 80 mm -Piston rod: 20 mm -Connection: 16 x 1.5 mm -Total length when retracted: 480 mm -Total length extended: 830 mm -Air inlet and outlet: adjustable -Quantity: 7 pieces available

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 160 mm -Piston diameter: mm -Piston rod: 16 mm (connection M 12 x1.5 thread) -Total length: 320 mm -Total length extended: 480 mm -Air inlet and outlet: adjustable -Quantity: 15 pieces available Price: per piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter Ø mm -Piston rod: 20 mm (connection M 16 x1.25 thread) -Total length: 230 mm -Total length extended: 280 mm -Air inlet and outlet: adjustable -Quantity: 3 pieces available Price: per piece -Weight: 1.6 kg/piece

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details.

Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.

Display Diane PP450.0571-K01 | Jenbacher original 541065 - NEW OPTIONAL ITEM: Interface card 3IF779.9 B&R -Jenbacher original 442076 - NEW = 740,00 €

In combination with Multiformer400, Only been used as a demo model, Belt width: 400 mm, Belt length: 1200 mm, Paper dimensions: 140 x 140 mm

8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V met Easy Form lasermeetsysteem met CNC-bombardement met Lazer Safe-bescherming met Willa hydraulische klemming boven en onder Turbo-versie Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 20 ton Capacity: 220 ton Bending length: 4100 mm

Manufacturer: Habrama Model: PPFM 3200 Year of Manufacture: 2008 Overhauled: 2025 (complete overhaul) Working Ranges - X-Axis (longitudinal): 3200 mm - Y-Axis (cross): 500 mm - Z-Axis (vertical): 410 mm - C-Axis: +30 degrees / -30 degrees Machine Table - Table Size: 390 x 4750 mm - Maximum Load: 6000 kg - T-Slots: 4 pieces - T-Slot Spacing: 90 mm - T-Slot Width: 18 H7 mm Axis Speeds and Accuracy - X-Axis Speed: 21 m/min, direct positioning accuracy +/- 0.002 mm - Y-Axis Speed: 10 m/min, direct positioning accuracy +/- 0.002 mm - Z-Axis Speed: 6 m/min, direct positioning accuracy +/- 0.002 mm - C-Axis Speed: 2 rpm, direct positioning accuracy +/- 0.003 degrees Milling Head - Drive Power: 45 kW (S6 at 40% ED) - Spindle Speed: 0 to 360 rpm - Maximum Cutter Diameter: 300 mm - Minimum Cutter Diameter: 125 mm + 2x cutting depth - Milling Capacity: up to Module 36 - Spindle Interface ...

Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

- Only 100 Working (table/guiders/tooling still in prohibitor) - Installed never used in production only testing - CNC T1 + T2 + T3 Bending help support arm in front - 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 - Lower Tooling set Variable VLA 50-150 mm - Upper Tooling set LVD 505  - Adjustment V-Axis 59,3 to 249,3 mm - Thermotec Oil chiller GC25T-35 max. 2200 kPa - CADMAN TOUCH with the best software for pressbrakes  - Hydraulic top tool clamping - Table width 500 mm - Troath in column 1000 mm

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal  ...

pressure: 400 t chamfer lenght: 4000 mm distance between columns: 3500 mm Control: CNC type: BC 25 Graphic throat: 400 mm total power requirement: 37,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2550 mm stroke: 150 mm total power requirement: . kVA Number of working hours: . h workpiece: workpiece: Number of strokes: total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your ...

Offer 26226 Technical data: - Pressure capacity 220 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table height 950 mm - Projection 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Floor recess - Space requirement approx. W 3500 x H 2950 x D 2000 mm - Weight machine approx. 17500 kg - Two-hand control panel with foot switch - Back gauge adjustable from the front by handwheel - Various bending tools

Hermerding Type PPD/60/60 Compressive force 60 ton Lifting height 10-80 mm Installation height approx. 450 mm Table 600 mm x 500 mm Stroke rate approx50 -1/min

pressure: 28.0 t throat: 225 mm stroke: 150 mm table surface area: 325 x 300 mm work speed: 2.0 - 9.8 mm/sek return speed: 12.8 mm/sek total power requirement: 4.0 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 6100 mm control: MNC 95 c Number of working hours: 4312 h voltage: 380 V / 50 Hz V : 7.100 x 2.450 x 3.400 mm total power requirement: 22 kW weight of the machine ca.: 26 t Maximum press force: 320 t Bending length: 6,100 mm Distance between side frames: 5,500 mm Control system: MNC 95 C Maximum ram stroke: 250 mm Maximum daylight (table to ram): 500 mm Throat depth: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil tank capacity: 350 l Operating hours: 4,312 h Power supply: 380 V / 50 Hz Total connected load: 22 kW Machine weight: approx. 26 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 720 kg dimensions: 1200 x 950 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

elektrische achteraanslag elektrische diepteregeling amada tooling opname bovenaan Buigvoorbeeld: 10 mm over een lengte van 3 meter Capacity: 160 ton x 3100 mm Backgauge: elec Max stroke: 300 mm Depth of throat: 340 mm Table width: 200 mm Length: 3400 mm Depth: 2000 mm Height: 2600 mm Weight: 8 ton Capacity: 160 ton Bending length: 3100 mm

3 assen: Y1 / Y2 / X Capacity: 160 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2550 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 79 mm/sec Electric motor (power): 14 kW Length: 3500 mm Depth: 2350 mm Height: 2850 mm Weight: 9 ton

LVD PPEB 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: Cadman B Touch Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 570 mm Depth of throat: 400 mm Table width: 200 mm Locking speed: 120 mm/sec Working speed: 14 mm/sec Returning speed: 130 mm/sec Electric motor (power): 42 kW Length: 8000 mm Depth: 3200 mm Height: 3775 mm Weight: 36 ton Capacity: 320 ton Bending length: 6100 mm

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 200 mm dayligth: 425 mm throat: 300 mm working feed: 9.0 mm/sec return speed: 90.0 mm/sec work height max.: 980 mm back stop - adjustable: ca. 700 mm Control: PPS-TS Touch oil volume: 350 l total power requirement: 18.0 kW weight: 12.000 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized bac ...

pressure: 40.0 t chamfer lenght: 1250 mm distance between columns: 890 mm work stroke: 100 mm dayligth: 300 mm column arm: 200 mm table width: 140 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec tank: 63.0 l total power requirement: 3.0 kW weight of the machine ca.: 2000 kg range L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit The ...

LVD-gereedschap 4 assen: Y1 / Y2 / X / R 2 beweegbare plaatsteunen Capacity: 80 ton x 2100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 1550 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 130 mm/sec Working speed: 10 mm/sec Returning speed: 113 mm/sec Electric motor (power): 12,5 kW Weight: 6 ton Capacity: 80 ton Bending length: 2100 mm

pressure: 135 t chamfer lenght: 3600 mm distance between columns: 3150 mm stroke of upper beam: 200 mm ajustment speed: 70.0 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec : 315 bar dayligth: 400 mm table height: 915 mm column arm: 250 mm engine output: 15.0 kW weight: 8800 kg range L-W-H: 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake with torsion bar - HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized gooseneck (swan-neck) upper tools - 1x rotatable MULTI-V die block - Re ...

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

LVD PPEB 135/3050 135T Press Brake Serial Number: 28414 Year of manufacture: 2002 Bending Length: 3050mm Servo-hydraulic bending system Precise slider positioning with a linear encoder Suitable for precise sheet metal bending A large number of tools available