line cast pp used for sale

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve -Manufacturer: Castel, collector valve/valve membrane, unused in original packaging -Type: 6110/22 -Price: per piece -Number: 5 piece -Dimension box: 100/50/H40 mm -Weight: 0.1 kg/piece

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

spindle diameter: 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min total power requirement: 22 kW weight of the machine ca.: 23.000 t dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min Control: total power requirement: 22 kW weight of the machine ca.: 23.000 kg dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, easily machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packaging unit: 3.0 kg New ! Dimension ( packaging ): 85 x 85 x 230 mm

Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /

Small manual machine

Castell Vall mixer-grinder with lifter for 200 liter meat bins, capacity: 4000 kg per hour, infeed capacity: 300 liter, lifting height: 1900 mm, total dimensions: 2150 mm x 1300 mm x 1900 mm. Incomplete, missing plate and knives.

Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Connectors, plugs, terminal plugs, coil plugs, Fast-On connectors, cable connectors, wired connectors, magnetic coils -Manufacturer: Castel, magnetic coil cable connector wired connector -Type: 9900/X66 -Connector: Fast-On connector -Number: 9 cable connectors available -Price: per piece -Packaging dimensions: 140/120/H35 mm -Weight: 0.1 kg/pc

boring mill, year 1990, CNC 4045D - v1.12.8. Used machine in good condition. More info & price on IndustrialBuyer.

boring mill, year 1990, CNC 4045R. Used machine in good condition. More info & price on IndustrialBuyer.

Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...

Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Linear drive, linear gear, lifting gear, spindle drive -Manufacturer: Festo, pneumatic linear drive type DGPL-18-1040-PPV-A-GF-B -Stroke length: 1040mm -Pmax: 8 bars -Dimensions: 1190/51/H55 mm -Weight: 3 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive -Condition: unused, from warehouse clearance -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3 drives available Price: per piece -Weight: 7 kg/piece

Matrix printer, continuous paper printer Manufacturer: PSi Type: PP405 Year of construction: 2011 Fully functional Voltage: 220V There are a total of 8 pieces. The price is for 1 piece All information without guarantee

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

new 3000 x 305

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...