line cast pp used for sale

Equipped with 1 set of tools, please note the control is defective

Stored in working condition, buyer must provide transport himself. No elevator available.

Siemens Push Button Panel PP17-II 6AV3688-3ED13-0AX0 RA2393 Manufacturer: Siemens Components: 1x 6AV3688-3ED13-0AX0 5x mounting clips VP 1x Profibus connector 3x plug connectors for 6AV3688-3ED13-0AX0 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:

Axial piston pump, AE A10VS0 71 DFR1/31R-PPA12N00, R910948730, Original! Rexroth, new Attention: This is an original Rexroth product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Axial piston pump, AE A10VS0 71 DFR1/31R-PPA12N00, R910948730, Original! Rexroth, new Dr=200 bar, 1500 rpm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and condit ...

2x pallet workwear, various helmets, reflective clothing, microgard coverall Auction-ID: A1-45424-124

Equipped with 1 set of tools, please note the control is defective Auction-ID: A1-45793-33

Includes various tools Auction-ID: A1-45793-9

Equipped with: digital control panel, emergency stop, foot pedal, paper, manual 2x pallets of new paper Auction-ID: A1-41993-85

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

Double Filling Hand Former Casting Line, 2 unit May contact me at: sywee@topglove.com.my

Materials: CPP // Film Width (Max): 2800 mm

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Multiplier piston for die-casting machine TF 1350, SC1400, 161104501, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Piston diameter 219mm, - Piston rod diameter 115mm, - Total length 470mm, - approx. 70 kg - Including the piston rings required for the piston

Multiplier cylinder for die-casting machine TF 1350, SC1400, 162007110, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Cylinder inner diameter 220mm, - Cylinder outer diameter 270mm, - Total length 420mm, - approx. 65 kg - Including the required sealings

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg

Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg

Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.

30T Heat Size EAF Meltshop with Billet Caster Year of Mfg. 2004-2014, installed but never been used. The Equipment was purchased over a 10-year period, starting in 2004. But recently management not get involved in steelmaking. The Buyer needs to invest in completing the Installation. A detailed plant assessment report (prepared by DANIELI) outlines the required works / investment to put it into operation. According to the report, the Steel Making Plant can reach more than 230.000 TPY billets production after adjustments to existing equipment and installation of a LF. The line consists of: • 30 Ton EAF (Electric Arc Furnace) 'CONCAST' Shell: Spout type; Diam. 4.0 M; Shell height 1.3 Int. Panels diam. 3.8 M; Hot heat 5 Ton; Bucket volume 23.0 M³; El. Pitch diam. 900 mm; Electrode diam. 16” 3x buckets charge; Tap-to Tap Time 90 min.; Power on 73 min. Transformer 17/20 M ...

This is a leveling kit with wheels, for movable Combi-Duo from the manufacturer Rational. The levelling kit is suitable for the Rational combi steamers of the iCombi series size 6-1/1 and 10-1/1. RRP: 333,90 € The price quoted is gross incl. 19% VAT. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. OUR USED EQUIPMENT SERVICE FOR YOU High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection diagrams and spare parts Testing according to ...

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Excl tipper Auction-ID: A1-44302-94

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Wicke- Elastic heavy duty bike -Wheel size: Ø 270/105-225 mm -Hole circle: Ø 188/9 mm -Price: per piece -Number: 1 piece -Weight: 8.9 kg/piece

heavy-duty castors, heavy-duty wheels, tires, forklift drive wheels -Manufacturer: Wicke- Topthane heavy-duty wheel -Wheel size: Ø 230 x 90 mm -Bolt circle: Ø 95/13 mm -Price: per piece -Quantity: 2 pieces -Weight: 7.5 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Jungheinrich, roller -Wheel size: Ø 85 x 75 mm -Inside: Ø approx. 25.2 mm -Price: per piece -Number: 3 piece -Weight: 1.1 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, swivel castor, track roller, pallet truck rollers -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 80 mm -Inside: Ø approx. 20.3 mm -Price per piece -Quantity: 1 piece -Weight: 1.4kg

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 85 mm -Inside: Ø approx. 11 mm -Price: per piece -Number: 3 piece -Weight: 1.5 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 80 mm -Inside: Ø approx. 17 mm -Price: per piece -Number: 4 piece -Weight: 1.5 kg/piece

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Surface: PU -Wheel size: O 170 x 75 mm -Inside: O 55 mm -Inside: O 85 mm cone -Price per piece -Quantity: 2 pieces -Weight: 7.3kg/pcs

Used Thinking Super Cascom Dental Die Casting Machine Year of manufacture : 2014 Think compressor ! Year of construction : 2015

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece