137,215 used machines on RESALE, but how to find them? Machine Search
Mepac heavy duty vertical bagging machine for bulk productions.
Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - .ucymachines/ Contact us at - sales@ucymachines
HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment.
max. wheel diameter: 600 mm gear width: 0 mm max. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mm diameter of hob: 290 mm cutter length max.: 470 mm tangential adjustment: 450 mm milling head -swivable +/-: 45 ° milling head speed: 15 - 380 U/min table rotation speed: 50 U/min milling spindle drive: 37 kW table diameter: mm table load: 3750 kg feeds: 2000 mm/min Control: Siemens 840D total power requirement: 115 kVA weight of the machine ca.: 31 t dimensions of the machine ca.: m - 6-axis CNC control Siemens Sinumerik 840 D - complete covering - counter stay - Coolant Unit - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Supply / exhaust air unit Fabr. Huber + Ranner Type Va-m-V2/8, Fabr. No. A92707/2 ZuP.1 Air flow rate 7,500 m³/min., engine 4 Kn = 1,500 rpm. Fan speed 2,600 rpm combined with: Va-m-V2/8; No. A92 707/2 P1-A1 Motor 3 KW; n = 1,500 rpm Fan speed 2,650 rpm Air capacity 7,500 m³/h
Supply air unit with heat exchanger Fabr. Huber + Ranner Type Fe-Vz/9, air flow rate 10,000 m³/h Motor power 0.8 KW ex, Fan speed 2,650 rpm
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
sheet width: 2600 mm plate thickness: 5 mm rear stop: 1000 mm cutting angle: 1°06 ° no. of strokes: 45 Hub/min voltage: 380 V / 50 Hz total power requirement: 5,5 kW weight: 4500 kg dimensions of the machine ca.: 3600 x 2200 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ritai 800L holding vessel Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge
Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,
This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details.
new
cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...
An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement.
This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details.
For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg
Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces
Haco TSX 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 8 > 14 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7,5 kW Length: 3880 mm Depth: 1650 mm Height: 1700 mm Weight: 4,5 ton Number of sheet holders: 18x
A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.
Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton
The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it:, - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products., - Applications: Its typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese., - Specifications: Although specific technical specifications can vary, common features might include:, - Capacity: Often measured in liters per hour, indicating the amount of milk it can process., - Pressure Ratings: The operating pressure used during the homogenization process., - Material: Typically made from stainless steel for hygiene and durability., - Efficiency ...
Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...
Dimensions (L/W/H): 2400x1200x410 mm Weight: 1300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg
CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...
Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V
TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.
workpiece diameter: 125 mm module: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mm travel -y axis: 40 mm travel -z axis: 500 mm workpiece diameter: 17 - 39,5 mm workpiece height: 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button
Heidenhain LS 623 ML: 220 mm iD nr 228 861 04 + signal decode
Hydraulic press JAM HYP-505H in very good condition for sale Manufacturer: JAM Model No.: HYP-505H Year of Make: 1990 Compressive force: 50 kN (5 t) Stroke length: 150 mm Working height: 385 mm Table size: 400 × 340 mm Punching hole: Ø 25 × 60 mm Ram speed: 260 mm/s Fpobmrjwin Emecu Idjb Ram speed: 39 mm/s Plunger return speed: 360 mm/s Pressure range: 7.7 MPa Safety light barriers Two-handed operation Voltage: 3-phase, 200 V, 1.5 kW, 10 A Weight: 400 kg Operating oil: 25 litres Height (mm): 1070 Width (mm): 670 Length (mm): 1060
Key data: 70 KW, 63 kVA, 400 V
HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315
WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system
Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton
x-travel:1000 mm y-travel:800 mm z-travel:800 mm weight of the machine ca.:24000 t dimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m
turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.
This 3-axis HARTFORD HB-3190 was manufactured in 2001. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 1,970 mm, and Z-axis travel of 920 mm. The machine includes a robust table size of 3,100 × 1,800 mm and a maximum table load of approximately 6,500 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD HB-3190 horizontal machining centre we have for sale. Contact us for further details.
This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, its ideal for precise bending operations. Contact us for more information about this machine.
Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible.
Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment.
We offer: Pallet racking, new Manufacturer: STOW is available several times. Scope of delivery for: 180 parking spaces other quantities also possible. 16 stud frames, approx. 6,000 x 1,100 mm 90 editions, approx. 2,700 x K125 x 50 x 1.5 mm 180 locking pins 32 Ground Anchor M 12 Technical data: Shelf height: approx. 6,000 mm Shelf depth: approx. 1,100 mm Max. load capacity per field: approx. 12,000 kg Max. load capacity per pallet: approx. 1,000 kg Max. load capacity per pair of trusses: approx. 3,000 kg (with evenly distributed load) Colour of the frames: blue Colour of the trusses: orange Shipping: Cheap shipping possible with inexpensive forwarding agent. Please inquire about the freight costs, stating your zip code and location as well as the desired item quantity. We offer a comprehensive range of new and used shelves and accessories and we ...
REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...
This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.
This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm.
This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
