lind used for sale

Description: Well maintained forklift with inspection, 3rd and 4th valve present, including 1 (steel) gas bottles. Year of construction: 2002 Lifting capacity: 8,000 kg (at 900 mm distance) Inspection until: April 2024 Operating hours: 11,200 hours Mast: plywood (3-piece) with free-lift (2700 mm) Engine: 6 cylinder Perkins (gas) Tires: super elastic (for double) Lifting height: 6,000 mm. Height (retracted): 3,900 mm Fork length: 2,400 mm Dimensions: L x W x H: 3,780 x 2,260 x 3,900 mm (without forks) Request for more photos!

Linde Cryoline MT1250 Freezing tunnel Serial: 5-19 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscre ...

weight max. in kg: 2500 kg stroke: 4150 mm load center: 600 mm free lift: 150 mm construction height: 2814 mm fork length: 1200 mm fork holder width: 1150 mm Frame width: 1050 mm daylight opening: 110-1320 IK-IK mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately

weight max. in kg: 1800 kg stroke: 4250 mm fork length: 1200 x 120 x40 mm free lift: 150 mm construction height: 2746 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately

Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.

weight max. in kg: 1.400 kg fork length: 1.100 mm stroke height: 6.295 mm load center distance: 400 - 600 mm battery: 48 V Electric side forklift | Linde - R14 The LINDE electric forklift truck is in good condition and can be inspected at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: R 14 | R-14 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with 5 Bitzer compressors Make: BITZER Type: 6G-30.2Y-40P Displacement: 153.1 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

with 3 Bitzer compressors Make: BITZER Type: 6H-25.2Y Displacement: 133.3 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...

workpiece diameter: 200/250 mm workpiece diameter: 200/250 mm threading length: 500 mm threading length: 500 mm thread pitch: 6 - 72 mm thread pitch: 6 - 72 mm grinding diameter - min.: 1 mm grinding diameter - min.: 1 mm centre distance: 800 mm centre distance: 800 mm max. module: 8 max. module: 8 spindle speeds: 0,19 - 32 U/mm spindle speeds: 0,19 - 32 U/mm pitch angle: 40 ° pitch angle: 40 ° relief of the tap: 0,015 - 4 mm relief of the tap: 0,015 - 4 mm grinding wheel diam. min/max.: 275 / 350 grinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kW total power requirement: 11 kW weight of the machine ca.: 3,6 t weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used forklift Linde H 160 for sale – 16 tons capacity, diesel, built in 1999 We offer a used Linde H 160 forklift for sale, ideal for demanding industrial applications. Technical details: Manufacturer: Linde Model: H 160 Propulsion: Diesel engine Lifting capacity: 16 tons Year of Make: 1999 Equipment: Full cabin Accessories: Long forks This Linde H 160 forklift is particularly robust and reliable, which makes it perfect for transporting heavy loads. Thanks to the full cab, the truck offers optimum driving comfort and protection in all weather conditions. Condition: Used, but well maintained and ready to use. This Linde forklift is an economical choice for operations looking for a reliable material handling solution. Contact us now for more information or to view!

LHS-Lagertechnik GmbH sells products for the warehouse technology sector. We offer new and used shelving systems, as well as used lifting and lifting equipment. In this ad, you will buy as follows: - Reach trucks used - Manufacturer: Linde - Type: R16-01 - Year of construction 2017 - Hours: 5842 h - Load capacity: 1,600 kg - Lifting height: 7610 mm - Overall height: 3100 mm - Fork length: 1180 mm - Operating length: 2500 mm - Operating width: 1270 mm - Battery: 48 volts built in 2017 - External 48 volt charger - NEW UVV test Feature Blue Spot & Spotlight Sale without guarantee and warranty because used equipment Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Errors / prior sale of used goods expressly reserved.

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...

Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!

LHS Lagertechnik, supplier of new and used racking systems, as well as lifting and lifting equipment. A LINDE stacker truck type L06 is for sale. Device as a cantilever carrier with normal fork suspension. In addition, as a special feature and very rarely, tine adjustment and sideshift. Device has a foldable platform, but can be used without folding out with a very small movement area. Device in very good condition with new UVV test. In this ad, you will buy as follows: - 1 piece Linde L06 AC No. Stacker / Cantilever Carrier - Chassis number: W41170D00228 / Year of construction 2013 - Hours approx. 3300 / Lifting height 1950mm / Fork length 1080mm - Hydraulic tine adjustment + sideshift - Battery 24 Volt / 3 PZM 375 AH / Year of construction 05/2013 - External 24 volt charger with 220 volt plug NEW UVV test, but sold without guarantee and warranty because used devic ...

A Linde E16L forklift truck with only 165 operating hours is being sold. The truck is fully functional and ready for immediate use. The forklift currently has a Kaup pallet turner installed. It can also be purchased without a turner. Specifications: Class 386 170 operating hours HF Onboard Charger 48V, 120 Ah 48 volts, 750 Ah battery Duplex Lift Mast: 3145/2121/1518mm Fork carriage 980mm wide, 6 castors Overhead Guard Comfort 2050mm Tyres Superelastik Lighting on the front and back Pallet reversible clamp brand Kaup Type: 1.5T 49lW with sideshift Width 970mm Isoclass 2 incl. solenoid valve 48Volt Opening/roller range 540 - 1,720mm

weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.