135,208 used machines on RESALE, but how to find them? Machine Search
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...
A Liebherr container reachstacker is available. Attachment: container spreader, rated capacity: 45t, capacity 2nd/3rd row: 35t/18t, load center: 2250mm, engine type: D936, engine power: 270kW, number of cylinders: 6, max. travel speed: 25km/h, max. lifting height: 16000mm, max. horizontal outreach: 7250mm, max. stacking height 1st row: 6 containers, turning radius: approx. 10m. Machine dimensions X/Y/Z: approx. 4500mm/6500mm/5850mm, weight: approx. 71t, operating hours: 6077h. Documentation available. An on-site inspection is possible.
1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...
module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : RT 70 RCA Year of manufacture : 2004 Bosch Control unit Machine has arrived. The machine brings an electronic error. Therefore, the machine is offered in need of repair. The machine comes from the first owner, from a German company. Accessories: according to photos Machine weight approx. [weight]: 1 t Dimensions approx. [size machine]: 140x140x230cm Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We are looking for ...
module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Liebherr WSC 1200____________Description:In General:Year of manufacture:2009Control system:Siemens 840 DExternal gear diameter:1,200 mmInternal gear diameter:1,200 mmMaximum gear width:260 mmMaximum workpiece diameter:1,500 mmMachine base:Travel:600 mmLateral adjustment:+/- 60 mmCutting head:Spindle diameter:125 mmTool holder:SK 45Distance between spindle and table:0–820 mmStroke length:270 mmMax. module:16 mmMax. tool diameter:300 mmMax. spindle speed:25 rpmTable:Table diameter:900 mmTable bore:320 mmBore depth:520 mmMax. speed:12 rpmMax. table load:95 kNEquipment:Chip removal:2 magnetic belt conveyorsCoolant supply:Cutting oil system with filter and temperature controlSet-up operation:Electronic handwheel
ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)
serial number: 630-8394 output: 210 kw Number of working hours: 9050 h with extended boom, type: LO4651B, serial no. 3001335Note: The Longfront has a long and a short boom! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID2846 Liebherr LTF1030 year/Baujahr 1983/2014 26170 hours/hours - 106.560 km Liebherr LTF1030 mobile crane (year of manufacture 1983), boom length 24 m, without jib, mounted on Iveco-Magirus (year of manufacture 2014) Mobile crane Liebherr LTF1030 (built in 1983), mast length 24 m, without jib, on Iveco-Magirus (built in 2014)
max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...
max. wheel diameter: 3000 mm gear width: 500 mm max. module: 25 / 40 spindle turning speed range: 250 U/min feed speeds: max. 4000 mm/min faceplate diameter: 2000 mm table bore diameter: 700 mm table turning speeds: 51 U/min power capacity - milling spindle: 53 kW drive motor for milling spindle: - kW axial adjustment: 1200 mm milling head swivable ca.: +/- 45 ° control: Siemens 840D total power requirement: - kW weight of the machine ca.: 55 t - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m The LC series is a machine system for the machining of spur and helical gears and cylindrical gear shafts and helical gears and cylindrical gear shafts, which is characterised by its special performance and versatility. Compared to other gear manufacturing processes, gear hobbing is characterised by its characterised by its high consistency of machining results over the entire tool life. Technical data of the machine: Basic specifications: --> Machining ...
max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024
max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024
max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing
max. wheel diameter:780 mm gear width:130 mm max. module:10 weight of the machine ca.:8,5 t no. of strokes:30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height ? table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be dem ...
max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion
max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine without counter holder Used to work with oil
max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN
Oil filter Fleetguard LF3749. For the following manufacturers / engines: Liebherr Gas Engines, John Deere - 950J D936L 2001 2 John Deere - 950C D9306T 1 John Deere - 1050C 1 Liebherr - R 940 DEMOLITION D944-A7-25 2021 1 Liebherr - R 926 IV/4F D934A7-04 2021 1. Further information can be found from the manufacturer at the presence. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E ...
Sn 53.865.146.0, frontwith 60cm Auction-ID: A1-49790-1004
Front with 600mm. Auction-ID: A1-49790-1434
Sn 53.838.473.3, frontwith 60cm Auction-ID: A1-49790-1148
NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
BIG volume bucket 200cm with Liebherr 509 attachment, - Construction year: 2025, - working width: 200 cm, - own weight: 493kg, - capacity: 1.72 m3
High-quality, fully integrable Liebherr Premium fridge-freezer combination, model ICBN 3356, for an approx. 178 cm high installation niche. BioFresh, DuoCooling and NoFrost offer comfortable storage conditions for fresh and frozen food. Equipment and technical data: • Total usable capacity: approx. 238 litres • Cooling area including BioFresh: approx. 176 litres • Of which BioFresh zone: approx. 67 litres • Freezer area: approx. 62 litres • Gross capacity: approx. 279 litres • Energy efficiency class according to the former marking: A • Energy consumption: approx. 236 kWh per year • BioFresh zone with two drawers • NoFrost with automatic defrost • DuoCooling with separate refrigeration circuits • PowerCooling, SuperCool and SuperFrost • Electronic touch control with temperature display • LED lighting • Glass shelves and integrated bottle tray • Three fre ...
Spacious Liebherr Premium fridge-freezer, model CNes 3866, with stainless steel front, large cooling area and convenient NoFrost technology. The interior has a total capacity of approx. 358 litres and offers plenty of space for fresh food and frozen products. Thanks to NoFrost, there is no need for regular manual defrosting of the freezer area. Removable drawers and glass plates with VarioSpace provide additional space for large frozen food if required. Model equipment and technical data: • Total usable capacity: approx. 358 litres • Cooling area: approx. 269 litres • Freezer area: approx. 89 litres • Gross capacity: approx. 377 litres • Energy efficiency class according to the former scale: A • Energy consumption: approx. 401.5 kWh/year • NoFrost freezing area • Automatic defrosting in the refrigerated area • MagicEye operation with LED temperature display • Au ...
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
maximum number of results exceeded
please refine your search
10 € 
