liebher used for sale

Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg

Chain excavator Liebherr R941B with sheet wall ram Technically fine Built in 1977

Liebherr batch mixer Content 750 LTR With 30kw electric motor

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

; Mileage [km]: 4; Power [PS]: 5

ID3595 Liebherr LH50 M Litr. year/Baujahr 2015 8.900 hours/hours Industrial monoblock boom, straight 9.60 m, industrial stick, stick end sharply angled 7.50 m with hydraulic quick coupler, medium-pressure circuit, grab lines, VarioLiftPlus 2A, active lowering of the lifting cylinder, support: rear and front outriggers, single tires, 16.00-25, protection for piston rods, outriggers and piston rods rear and front, GTS 13 kW generator system, hydraulic, LHC 255 cab elevation, magnet system, push button on the right joystick, various grabs are also available on request Industrial monobloc boom straight 9.60 m, industrial stick, stick end strongly angled 7.50 m with hydraulic quick coupler, medium pressure circuit, grab lines, VarioLiftPlus 2A, lifting cylinder actively lowered, support: claws at the rear and front, single tyres, 16.00-25, protection for piston rods, claws and piston rod ...

7 stueck LORENZ or LIEBHERR Schraegfuehrungen - see picture Further: Airfilter (Euro 1000,--)

YEAR: 1988 HOURS: 12,000

Div. Interchangeable wheels for the gearbox, C-axis table; B-axis milling spindle Drezahl

Industrial wheeled excavators

Engine Brand: LIEBHERR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , , https://www.hamofa.com/stock/diesel-engines/liebherr-g924-used/607, , = More information =, , Type: Engine, Empty weight: 680 kg, Type number: G924

We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...

We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...

We offer a Liebherr G944 for sale.

Main pump on the motor Hydromatics Nameplate 5005 348 80SP 1 R 101 P 1 227 . 22 . 20 . 39 1 708 698 11/83 2300 69.1 Goods in very good condition ! comes from: LIEBHERR crawler excavators Type. R 922 LC Fabr. No. 152 / 375 1982 Engine power: Deutz 78kw

Hobbing machine Manufacturer: Liebherr Type S600

If you are interested, please contact us

If you are interested, feel free to write

Key data: 330 , 413 , 400

Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.

Key data: 7 KW

A total of 6 starters for sale by Bosch for Liebherr Gasmotoren 1021 8368. Technical details: Volts: 24 volts Power: 7.8 KW Number of teeth: 11 Hole attachment: 3 Direction of rotation: right Riginal numbers are for comparison purposes only: Starter Bosch 0001330013 Starter Bosch 0001330069 Starter Bosch 0001330070 Starter Bosch 0001383037 Starter Bosch 1986S10003 Starter Bosch 1986S10004 Starter Liebherr 10218368 Starter Liebherr 11386646 Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades o ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

Used Liebherr FKUv 1660 Premium gastro beverage refrigerator with convection cooling - Maximum cooling capacity in the smallest of spaces. If you buy two or more devices, we offer a 5% discount. When you choose Liebherr, you are investing in longevity. This beverage refrigerator is indispensable in restaurants, hotels or offices. The housing and door are made of stainless steel and are therefore easy to clean and corrosion-resistant. The recirculation system ensures even distribution of cold throughout the interior. This means that even freshly stored bottles quickly reach the desired drinking temperature. Technical data: Outer dimensions: H 83.0 cm | W 60 cm | D 61.5 cm Gross capacity: 41.4 l Net capacity: 130 l 220-240 V - 50 Hz Temperature range +1 °C to +15 °C Material housing/door: stainless steel Cooling system: Convection Undertable model Year of construct ...

We sell here 3 starters of the brand Bosch for e.g. Liebherr G944. The starters are new. If you have any questions, please contact us. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on ov ...

We sell here 3 cylinder head AT; V-engine, 3rd version of the brand Liebherr. Without thermocouple. With serial closure plugs. Repaired by engine rebuilders. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with ...

Key data: 155

Schnell CHP Biogas Container 160kW. Low hours biogas CHP. Equipped with a Liebherr L4R20.1BO Engine. 155kW electrical 154kW thermal Fuel: Biogas Year: 2016 Hours: 13000h Power: 155kW Voltage: 400V Frequency: 50Hz Scope of supply: fully equipped container (L12,2m W3,2m H3,1m) including engine, alternator, frame, control panel, gas ramp, heat exchanger, table cooler, chimney. Additional 100kW boiler. The engine is currently set to run at 100kW, but power can be increased to 155kW via a software update. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Key data: 569 KW

2G Agenitor 412 Biogas Generating Set Model: 2G Agenitor 412 Capacity: 569kW Fuel: Biogas Year: 2017 V: 400 HZ: 50 Hours: 9,000 Scope: Engine, Alternator, Base Frame, Control Panel, Gas Line. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Liebherr slide-in gearbox from stock as good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machine in top condition, equipped with loading unit, many accessories. This machine is equipped with manual deburring function with a cutting wheel, no chamfering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Under power , complete

max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

max. wheel diameter: 280 mm gear width: 330 mm max. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt

max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...

Gear hobbing machine LIEBHERR ET 1200

max. wheel diameter: 780 mm gear width: 130 mm max. module: 8 / 10 table diameter: 510 mm table bore diameter: 160 mm number of strokes (double strokes): 30 - 1500 DH/min Control: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mm table-size: 500 mm total power requirement: 36 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,9 x 3,65 x 3,8 m The machine is suitable for: - Internal and external gear teeth in small quantities - Internal gear teeth in blind holes (non-through holes) - External gear teeth without run-out, as hobbing would not be possible Examples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs... - Siemens Sinumerik 3 CNC control - Chip conveyor Machine was only used sporadically The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Key data: 515 KW, 400 V

3 x Liebherr G9512 Natural Gas Generating Sets Hours: 0 HZ: 50 Scope of Supply: Engine, Alternator, Base Frame, Control Panel (MOTORTECH), Gas Line, Radiator, Exhaust. These sets are electricity only but can be adapted to work as CHP units. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

max. wheel diameter: 380 mm gear width: 200 mm max. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mm max. workpiece diameter: 400/ 600 (800) Außen innen beg max. gear width: 200 mm Center distance between gear head and table center: -50 / 450 mm Travel range of the lifting position: 250 mm Max. module for straight gearing: 6 mm Max. axial travel: 250 mm work table:: - table diameter: 400 mm table hole: 150 mm max. table speed: 30 1/m no. of T-slots: 6 St. Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kW Max. stroke rate: 600 DH/min Face milling head axis angle adjustment: +/- 0,5 ° spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mm Stro ...

Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 713 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://hamofa.hamofa-bb.be/stock/diesel-engines/liebherr-d9512-a7-04- new/42294, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.587 kg, Type number: D9512 A7-04

Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/liebherr-d856-a7-new/243, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D856 A7; Transport weight [kg]: 1100

Engine Brand: LIEBHERR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/liebherr-d856-a7-new/42, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D856 A7; Transport weight [kg]: 1090

max. wheel diameter: 2500 mm gear width: 750 mm max. module: 18 / 22 min. module: table diameter: 1800 mm min. number of teeth: 12 table hole: 300 mm hob turning speeds: 20 - 100 U/min table load: 10 t milling cutter dia. x width: 250 x 340 mm shifting: 150 mm feeds - tangential: 0,25 - 3 mm/min feeds - radial: 0,07 - 1,5 mm/min feeds - longitudinal: 0,55 - 3,5 mm/min milling feeds: 13,4 - 80 (Einzelteilen) mm/min total power requirement: ca. 30 kW weight of the machine ca.: 28 t - change gears, arbors, toolings, clamping plots - universal hob head - swiveling outer steady - single indexing device party overhauled in 2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.