128,203 used machines on RESALE, but how to find them? Machine Search
We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...
NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph
Description: COFRAM plate filter 13 plates dimensions 360 x 360 mm Painted steel frame on casters with a stainless steel retention tank Dimensions 610 x 500 H 1250 mm Weight 103 Kg
Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public places or in private areas - the Cologne S smoking shelter with access on the right is a reliable choice for a practical and versatile shelter with timeless elegance in the outdoor area. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The stable frame construction made of hot-dip galvanized and powder-coated square steel tube guarantees durability and durability. The steel parts are primed and paint-coated (protection class: C4 medium). High-quality wall elements made of toughened safety glass shield against wind and rain. The canopy is designed in such a way that it can easily withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether as a smoking shelter or as a bus shelter - this canop ...
1 of used motion controller, make Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM-tested OK. PS: we can potentially upload your machine program onto this controller, as well as provide further related troubleshooting and issue-resolving service.
Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...
1 used motion controller, manufacturer Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM tested OK. PS: We may be able to upload your machine program to this controller and provide other related troubleshooting and resolving services.
Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.
Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...
Product Description For sale is a Wilo pressure booster system COR/T-1 HELIX 2.0, consisting of: Wilo pump system COR/T-1 HELIX 2.0 VE407-GE Wilo Reservoir 150 L PE COT GII (nameplate available) Fully pre-assembled assembly including piping, valves and control Condition as good as new: clean, complete, in working order Technical data of the system (Original data from Wilo data sheet) Hydraulic data Max. inlet pressure: 6 bar Max. operating pressure: 16 bar Pressure side connection: G 1 1/4 Number of pumps: 1 Plant capacity: 8 m³/h Medium temperature: 5–40 °C Ambient temperature: 5–40 °C Engine data Mains connection: 3~ 380 V / 50/60 Hz Nominal power P2: 1.5 kW Rated current: 2.7 A Degree of protection: IP55 Insulation class: F Motor efficiency: 93.9 % [Wilo_COR_T-1HELIX2 | PDF] Materials Pump housing: stainless steel Impeller: Stainless s ...
; Gross weight [kg]: 2630; Inspection Date: 2025-12-12; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300
Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric
This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB
Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.
CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...
Bottle filler, Fabr. SEN, type Combi-RE H2, with 30 filling organs and 6-digit KK, set up on 0.5 lt + 0.33 lt NRW Longneck + 0.5 lt EURO-Fl, running direction: left --> right, with vacuum pump (slightly leaking), discharge table, various spare parts, S5 control, incl. operating instructions, built in 1991, already removed
Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...
Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.
Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures
COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg
We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.
; Gross weight [kg]: 1730; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 620; Maximum lift capacity [kg]: 350
; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450
Envelope feeder suitable for C4 and B4 envelopes
Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);
Miwe Condo CO 4.0806 2D Stone Slabs Oven Electric -Shared oven with 4 floors and proofing cabinet -Manufacturer : Miwe -Model: Condo CO 4.0806 2D -with 4 floors each 80x60cm -with Miwe FP8 control -Floor entrance height 13cm -with proofing cabinet -with exhaust air hood and vapour condenser -Year of construction 2012 -18.9 kW -400 Volt 50Hz Outer dimensions approx.: 110x 115cm and 210cm high
diameter range 3-10 mm cutting length 10-200 mm
COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.
used
Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.
used
-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/12DC/5 Ord.No.: 2866475 -Input: 100-240 V -Output: 12 V -Cardboard dimensions: 185/175/H50 mm -Weight: 0.6 kg
Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...
with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent
with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm
with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece
maximum number of results exceeded
please refine your search
